summaryrefslogtreecommitdiff
path: root/sys/dev
AgeCommit message (Collapse)Author
2000-07-04sync with NetBSD... well almost. someone w/ the hw should check umass.Federico G. Schwindt
2000-07-04handspring visor driver; from NetBSD.Federico G. Schwindt
2000-07-04syncFederico G. Schwindt
2000-07-04new prods.Federico G. Schwindt
2000-07-03Add support for big endian hardware. Clean up memory vs. io mapping code.Steve Murphree
Fix for drives with Tag quirks.
2000-07-03oopsMichael Shalayeff
2000-07-03closer approximation to an alpha using new wscons.Michael Shalayeff
tga moved to dev/pci. by request from alpha people.
2000-07-03Carefully reset pcic register; ok @aaronNiklas Hallqvist
2000-07-03From NetBSD:Aaron Campbell
- Fix an incorrect interrupt sharing type. - Always clear PCIC_INTR_ENABLE; it doesn't do what one might think. - Eliminate stray interrupts during the IRQ probe.
2000-07-02add via vt6102 id; freebsd-gnatsJason Wright
2000-07-02syncJason Wright
2000-07-02add via vt6102 id; freebsd-gnatsJason Wright
2000-07-01syncAaron Campbell
2000-07-01Oops, forgot to commit these new device IDs last night.Aaron Campbell
2000-07-01- Make the 3CCFE575BT work.Aaron Campbell
- Add support for the 3CCFEM656C. - Lots of code cleanup.
2000-06-30Oops, put back this call to spltty(). When our timeout expires and we poll theAaron Campbell
pcic, we don't want to be interrupted by real interrupts generated by the pcic.
2000-06-30Convert to new timeout API.Artur Grabowski
2000-06-30New timeout API.Artur Grabowski
2000-06-30.es kbd; from nbsdMichael Shalayeff
2000-06-30some more display types; from nbsdMichael Shalayeff
2000-06-30Driver for the cs4280 Crystal Clear audio found on some laptops.Artur Grabowski
At last my Thinkpad plays german music.
2000-06-30Convert to use new timeout API.Artur Grabowski
2000-06-30Convert some parts to new timeouts.Artur Grabowski
2000-06-30Convert to new timeouts.Artur Grabowski
2000-06-29after computing the hash value, inform the card [delete-o from when thisJason Wright
was imported]. Also, backout previous.
2000-06-29Allow USB to compile with USB_DEBUG defined; binkertn@umich.eduAaron Campbell
2000-06-29regenNiklas Hallqvist
2000-06-29Devices found in a Sony VAIO PCG/XG28Niklas Hallqvist
2000-06-29Be more detach friendly. In particular, remove the infinite while() loopsAaron Campbell
waiting on S_COMMAND_IN_PROGRESS and replace them with a bounded loop count plus a small delay; from NetBSD.
2000-06-29No need to call bpfdetach(), that's done in if_detach().Aaron Campbell
2000-06-29Sync adw files with (almost) latest NetBSD versions:Kenneth R Westerback
adw.c synched with v1.23 (from v1.14) adw.h v1.9 ( v1.5 ) adwlib.c v1.17 ( v1.7 ) adwlib.h v1.13 ( v1.7 ) adwmcode.c v1.5 ( v1.2 ) adwmcode.h v1.5 ( v1.2 ) microcode for cards is updated to latest version, loss of carrier problems are solved in a more robust manner than before, lots of code cleanup. first support for upcoming U3W cards added, as a result of which the driver is now too large for RAMDISK and has been moved to RAMDISKB. Most of the work done by dante@ NetBSD.
2000-06-28sync with NetBSD v1.7Kenneth R Westerback
2000-06-28Remove pointless variable. It is set to 0, then returned without modification.Todd C. Miller
2000-06-28Make suspend -> eject card -> resume work.Aaron Campbell
On suspend, the apm code calls each function in its powerhook list. This list contains pointers to functions that are to be executed on PWR_SUSPEND and PWR_RESUME. One of these functions is pcmcia_power() which calls xxx_activate() for each PC Card that is connected with the action DVACT_ACTIVATE (where xxx is the name of the driver for the PC Card). On resume, the same thing happens, except the action is DVACT_ACTIVATE. Clearly, if a card is gone when we resume, trying to activate it is a bad idea. This commit adds a pcic_power() function that runs before pcmcia_power(). On resume, it uses pcic_intr_socket() to detect any events that occurred while we were suspended. (I had to split pcic_event_thread() into a threaded part and a non-threaded part, since the thread will not run when we are in interrupt context, but I need the events to be processed before pcmcia_power() runs.) So, by the time pcic_power() is through, all events that occurred during suspend have been processed, and pcmcia_power() will not try to activate cards that are not there since they have already been completely and properly detached. Note that event handling for card removals first calls the deactivate functions on the card then the detach functions. When we suspend, apm does the deactivate for us. So on resume, if we detect a card has been removed, we skip the deactivation step and just detach. We use the DVF_ACTIVE bit to determine whether or not deactivation has already occurred. Deactivating a device that has already been deactivated causes a panic.
2000-06-28Don't call the drivers' xxx_activate() function directly -- use the systemAaron Campbell
config_activate() and config_deactivate() routines instead. This way, the DVF_ACTIVE bit gets updated appropriately.
2000-06-27Move ac97 register defines into ac97.hArtur Grabowski
2000-06-27Make this driver work. When I ported it from FreeBSD, somehow a line got leftAaron Campbell
out. :-( It was never noticed until now since I didn't have an actual D-Link 550TX card to test with. Thanks to Gardner Cohen for sending me one of these.
2000-06-26Convert to new timeouts.Artur Grabowski
2000-06-26let svnd deal with sparse files, okay art@ deraadt@Niels Provos
2000-06-26interface can be faked for cmd chipsChris Cappuccio
2000-06-26from NetBSDChris Cappuccio
support CMD 648/649 UDMA66 controllers fix promise UDMA66 cable check
2000-06-26Make the Linksys Combo PCMCIA EthernetCard (EC2T) work again; it was broken byAaron Campbell
the last commit for AX88190 support. There are at least three variants of ne's that have manufacturer id 0x143 (Linksys) + product id 0xc1ab. Each one has its enaddr in a different place. The matching code for PCMCIA NE2000 is really gross. In particular, the flags field in ne2000_devs (for NE2000DVF_DL10019 and NE2000_AX88190) is a complete hack. The driver should really try each method of reading the Ethernet address (from the ROM, DL10019, and AX88190) and choose the one that generates the correct checksum. I plan to fix this later...
2000-06-26syncAaron Campbell
2000-06-26Add a PCMCIA_CIS entry for the Linksys Combo PCMCIA EthernetCard EC2T.Aaron Campbell
2000-06-23Implement PCMCIA event polling. This will either complement interrupt-drivenAaron Campbell
event notification from the pcic (if an interrupt is available) or allow the insertion and removal of PCMCIA devices even if there is no IRQ for the pcic. Each socket is checked for status change every 0.5 seconds using art's timeout code. Insertion and removal events should no longer ever go unnoticed.
2000-06-23Pass the correct sizeo() to cfattach struct so we don't panic on detach.Aaron Campbell
2000-06-22on unconfig, bzero the key before free; from aazubel@core-sdi.com.Federico G. Schwindt
2000-06-22xl_setmulti_hash() does not work right. tested at usenix2000 term room.Jun-ichiro itojun Hagino
affects 905B only.
2000-06-20add encryption for svnd's for Erich <hh@cyberpass.net>. You can do aNiels Provos
poor man's encrypted file system with this. Blame the Greek. okay niklas@
2000-06-20allow rx to work after tcpdump; ok art@Todd T. Fries
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-24 14:27:51 +0000