summaryrefslogtreecommitdiff
path: root/sys/dev
AgeCommit message (Expand)Author
2008-05-26Add more ioctl's (still unfinished); VIDIOC_ENUM_FMT, VIDIOC_ENUMINPUT,Marcus Glocker
2008-05-26On sparc64, fetch "scsi-initiator-id" property from the firmware, and useMark Kettenis
2008-05-26Limit to 80 char width and tweak comments for readability.Jonathan Gray
2008-05-26Properly handle usbd_get_interface_descriptor() returning NULL.Jonathan Gray
2008-05-26Count output packets.Brad Smith
2008-05-25use ac97 default parameters for auich(4), auixp(4) and auvia(4).Jacob Meuser
2008-05-25add a function to get default parameters for ac97 codecs. all ac97Jacob Meuser
2008-05-25tweak the SPI port configuration if we figure out that it is not quiteDavid Gwynne
2008-05-25Don't define EHCI_DEBUG when USB_DEBUG is defined. This to be consistentMarc Balmer
2008-05-25Spacing. Comments. strncpy() -> strlcpy().Marcus Glocker
2008-05-25Remove redundant enabling of bus master which pci_mapreg_map() dealsBrad Smith
2008-05-25Remove redundant enabling of memory space and bus master whichBrad Smith
2008-05-24Add a quirk to prevent this LCD device from attaching as a HID. This is aChris Kuethe
2008-05-24- Enable userland to read(2) video stream from /dev/video.Marcus Glocker
2008-05-24Sync the ATI IXP200 PCI id.Brad Smith
2008-05-24regenBrad Smith
2008-05-24Tweak some of the existing ATI IXP entries for more consistentBrad Smith
2008-05-24regenBrad Smith
2008-05-24There should be spaces between "product" and the vendor name.Brad Smith
2008-05-24regenerateChris Kuethe
2008-05-24USB LCD+keyboard panelChris Kuethe
2008-05-24And another Fujitsu Gigabit Etherenet card that is a bge(4) in disguise.Brad Smith
2008-05-24regenBrad Smith
2008-05-24Add Fujitsu PW008GE4Brad Smith
2008-05-24Also recognize the Schneider & Koch SK-9821/SK-9843 adapters fromBrad Smith
2008-05-24regenBrad Smith
2008-05-24Add more specific PCI ids for Schneider & Koch (SysKonnect) SK-9821/SK-9843Brad Smith
2008-05-24Store the model and revision information in the appropriate softcBrad Smith
2008-05-23Fix detection of 10baseT on rev 2 and up.Mark Kettenis
2008-05-23Another Fujitsu Gigabit Etherenet card that is a bge(4) in disguise.Mark Kettenis
2008-05-23regenMark Kettenis
2008-05-23Add Fujitsu PW008GE5.Mark Kettenis
2008-05-23Bye bye awi(4). No net80211 love, uses its own WEP code and has not workedBrad Smith
2008-05-23Simplify the combination use of pci_mapreg_type()/pci_mapreg_map() asBrad Smith
2008-05-23Make rd act more like a 'normal' disk device, allowing the elimination ofKenneth R Westerback
2008-05-22ANSI function definitions.Brad Smith
2008-05-22syncTheo de Raadt
2008-05-22simplify (less bytes in media)Theo de Raadt
2008-05-22never schedule a timer for a negative time, if in the past schedule short delay.Dale Rahn
2008-05-22More timeout(9) usage cleaned up.Michael Knudsen
2008-05-22Remove unnecessary receive filter call from the attach hook. This isBrad Smith
2008-05-22Add the MCP77, 79 and 7B SMBus controller ids.Brad Smith
2008-05-22Read the MII_ANAR register and get the common denominator ability.Brad Smith
2008-05-22Remove the "loaded firmware" message from dmesg. Only print somethingBrad Smith
2008-05-22regenJonathan Gray
2008-05-22Add a bunch of devices from submitted dmesgs.Jonathan Gray
2008-05-21Fujitsu PRIMEPOWER250/450 secondary LAN is a BCM5703C in disguise.Mark Kettenis
2008-05-21regenMark Kettenis
2008-05-21Add Fujitsu PRIMEPOWER250/450 secundary LAN.Mark Kettenis
2008-05-21regenMiod Vallat
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 21:11:01 +0000