summaryrefslogtreecommitdiff
path: root/sys/dev
AgeCommit message (Expand)Author
2006-11-02whitespaces cleanup, no functional changeFelix Kronlage
2006-11-01Put common data for each RX DMA descriptor into a new rxsoft structure.Brad Smith
2006-11-01lm75 scoring should not show up in verboseTheo de Raadt
2006-11-01Use correct error message as return value. OK dlg@Claudio Jeker
2006-11-01dont walk the device list looking for our scsibus, it is stashed when weDavid Gwynne
2006-11-01whitespace fixesDavid Gwynne
2006-11-01abort bulk-in and bulk-out pipes in zyd_stop() before freeing theDamien Bergamini
2006-11-01fix firmware fatal errors on re-associations.Damien Bergamini
2006-11-01fix the tx path so it can use more than one scatter gather entry whenDavid Gwynne
2006-11-01regenJolan Luff
2006-11-01BWCT serialJolan Luff
2006-11-01syncTheo de Raadt
2006-11-01amd 8111 has an ethernet, but we have never seen anyone use it yetTheo de Raadt
2006-11-01let the tx completion path clean up by recording which mbuf we'reDavid Gwynne
2006-11-01vmware frames are slightly short, but that is ok. done with clues fromDavid Gwynne
2006-11-01fix the barriers in setlladdr.David Gwynne
2006-11-01poll errors should be POLLERR, not some random E valueTed Unangst
2006-10-31- Rename a variable to clarify meaning of index.Brad Smith
2006-10-31first cut at sensorsJolan Luff
2006-10-31add missing prototype for aml_evalinteger()Thordur I. Bjornsson
2006-10-31- Make DMA descripter members volatileBrad Smith
2006-10-31we're passing physical addresses to the adapter, so say so. add some magicDavid Gwynne
2006-10-31absolutely huge reworking on this driver (sorry reyk). so far attach,David Gwynne
2006-10-30regenBrad Smith
2006-10-30add PCI ids for newer Intel PRO/1000 chipsets.Brad Smith
2006-10-30regenBrad Smith
2006-10-30fix a typo in the comment above the SNI entries, SNC -> SNI.Brad Smith
2006-10-30Fix dynamic tuning of the radio sensitivity I broke when moving fromDamien Bergamini
2006-10-30Fix nameref -> objref for forward definition evaluatorJordan Hargrave
2006-10-30removed unused variable.David Gwynne
2006-10-30regenBrad Smith
2006-10-30add an ALI PCI-ISA bridge and an NEC PCIe to PCI-X bridge.Brad Smith
2006-10-29Reorganize malo_intr() a bit. Check for unhandled interrupt flags andClaudio Jeker
2006-10-29In malo_ioctl() if the returned error is ENETRESET reset the device.Claudio Jeker
2006-10-29MALO_CMD_RESPONSE is acting just as a flag so move it to the end of the list.Claudio Jeker
2006-10-29Fix some nasty bugs in malo_reset() and malo_cmd_set_channel() and simplifyClaudio Jeker
2006-10-29Add first TX path and active scan bits. Don't expect to much yet.Marcus Glocker
2006-10-28M_TRAILINGSPACE(m) returns 0 if M_READONLY(m) is true,Brad Smith
2006-10-28- Use better names for the variables containing the timeouts in Hz instead ofMarc Balmer
2006-10-27udcf(4) degraded the sensor status from OK to WARNING on the first receiptionMarc Balmer
2006-10-27regenBrad Smith
2006-10-27add the NVIDIA GeForce 6100 nForce 430 and some more MCP61 devices.Brad Smith
2006-10-26Set Rx early threshold and Tx DMA thesholds.Brad Smith
2006-10-26Fix this by commiting the proper revision of the bge_encap() diff.Brad Smith
2006-10-26bge_encap():Brad Smith
2006-10-26fix fxp(4) so that it will reset the link when you change the speed... ThisBrad Smith
2006-10-26Move from a switch based baud rate selection to range checkingJonathan Gray
2006-10-26Driver for MosChip MCS7703 based USB Serial devices.Jonathan Gray
2006-10-26regenJonathan Gray
2006-10-26MosChip serial & EthernetJonathan Gray
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-19 06:53:53 +0000