index
:
src
cvs/HEAD
kms/intel
kms/radeon
master
OpenBSD base system
summary
refs
log
tree
commit
diff
log msg
author
committer
range
path:
root
/
sys
/
dev
Age
Commit message (
Expand
)
Author
2006-11-22
don't write to BBP before it is ready and fully initialized
Damien Bergamini
2006-11-22
Some more minor cleanup in the PCI hookup.
Marcus Glocker
2006-11-22
From Jon Simola <jon@mecha.ca>:
Marcus Glocker
2006-11-21
Fail wi_get_txpower() on USB wi(4), so that we don't CSR_READ on them.
Miod Vallat
2006-11-21
Free allocated mbufs at TX done. While there also reset some TX descriptor
Marcus Glocker
2006-11-21
fix dmesg printing for the artisea chipset.
Brad Smith
2006-11-21
From Jon Simola <simola@mecha.com>:
Marcus Glocker
2006-11-21
Remove watchdog handler workaround introduced in rev 1.149 which is no
Brad Smith
2006-11-21
style changes. no op.
Brad Smith
2006-11-20
Re-enable HW VLAN tagging.
Brad Smith
2006-11-20
set the IFCAP_VLAN_HWTAGGING capabilities flag.
Brad Smith
2006-11-20
Added 2nd pass for interrupt override scanning
Jordan Hargrave
2006-11-20
Fix register number definitions.
Mark Kettenis
2006-11-20
only try to do HW checksum offload for TCP and UDP.
Brad Smith
2006-11-20
Due to an incorrect macro, it appears that the driver has always been
Brad Smith
2006-11-20
Add support for LM63.
Mark Kettenis
2006-11-19
Re-enable the Intel i31244 support now that real hardware actually exists.
Brad Smith
2006-11-19
some additional registers for the Artisea chipset operating in DPA mode.
Brad Smith
2006-11-19
In bnx_start, check the used_tx_bd count rather than the descriptors
Brad Smith
2006-11-19
regen
Brad Smith
2006-11-19
add the Broadcom BCM4312 PCI id.
Brad Smith
2006-11-19
restore the workaround for rate==0 bug.
Damien Bergamini
2006-11-19
Probe for National Semiconductor LM63.
Mark Kettenis
2006-11-19
Probe for Myson MTP008.
Mark Kettenis
2006-11-19
Add PCI hookup for malo(4).
Marcus Glocker
2006-11-18
Remove some useless variables/code dealing with cardbus BARs
Alexander Yurchenko
2006-11-18
ixgb_get_buf():
Brad Smith
2006-11-18
add a few comments
Brad Smith
2006-11-18
fix comments
Brad Smith
2006-11-18
- set descriptor DMA addresses before enabling TX and RX
Brad Smith
2006-11-17
Minor cleanup.
Marcus Glocker
2006-11-17
KNF
Marcus Glocker
2006-11-17
Remove code that deals with sk(4) specific phy's that breaks certain msk(4)
Mark Kettenis
2006-11-17
This is a very initial import for a driver which supports the IEEE 802.11
Marcus Glocker
2006-11-17
sync
Theo de Raadt
2006-11-17
usb hub found on ibm x3455; Srebrenko Sehic
Theo de Raadt
2006-11-17
Add a lower TX threshold value and use this when checking the number of
Brad Smith
2006-11-16
sync
Theo de Raadt
2006-11-16
another cdce
Theo de Raadt
2006-11-16
Drop malo_reset() for now and do ENETRESET and media changes using
Marcus Glocker
2006-11-16
add support for 4 new radios: AL2210, CGT, Maxim New, Maxim New2
Damien Bergamini
2006-11-16
Minor cleanup; reactivate malo_cmd_reset() which seems to work now, remove
Marcus Glocker
2006-11-16
have SK_IS_YUKON only match for first generation Yukon chipsets.
Brad Smith
2006-11-16
when checking for an appropriate revision of chipset use SK_IS_YUKON2
Brad Smith
2006-11-16
remove the small amount of code for Yukon-2 chipsets now that there is msk(4).
Brad Smith
2006-11-15
Quiet down debug output by default. Improve cmd response/result handling.
Marcus Glocker
2006-11-15
Hook up acpi apic interrupt routing support to generic acpi code.
Mark Kettenis
2006-11-15
dd pseudo-devices to handle acpi apic interrupt routing.
Mark Kettenis
2006-11-15
Enable data packet transmission.
Marcus Glocker
2006-11-15
Fix the loop in malo_tx_intr(). This fixes a infinit loop that happend after
Claudio Jeker
[prev]
[next]