| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2006-03-04 | remove vlan header. | Brad Smith | |
| 2006-03-04 | - Use sc->sc_dev.dv_xname everywhere. | Brad Smith | |
| - Always set IFCAP_VLAN_MTU. - Remove some printf's from the error paths in vic_alloc_mbuf(). - Move the device struct up to the top of the softc struct so the driver will actually attach.. sometimes, still issues to resolve. | |||
| 2006-03-04 | handle lm96000 (another similar chip); ok kettenis, tested by ↵ | Theo de Raadt | |
| stu@spacehopper.org | |||
| 2006-03-02 | Put the PHY update/reset call in nfe_init back to the spot it was at | Jonathan Gray | |
| before Rx/Tx/Interrupts are enabled. This makes <fredd at cse.sc.edu>'s nfe+icsphy setup work again. Tested on nfe+eephy by otto@ and myself, nfe+ciphy by otto@ and nfe+rlphy by wilfried@ ok deraadt@ | |||
| 2006-02-28 | Remove a debug printf that crept into the last commit. | Jonathan Gray | |
| ok deraadt@ | |||
| 2006-02-28 | We need to special case ciphy to ask for RGMII interface at 2.5V for nfe. | Jonathan Gray | |
| This makes Cicada/Vitesse PHYs attached to nfe work. Many thanks to Bill Paul for diagnosing the problem and suggesting a solution. Tested by otto@, ok deraadt@ | |||
| 2006-02-28 | Switch to software WEP in a way mostly similiar to what David Young | Jonathan Gray | |
| did in NetBSD. Fixes WEP on aanriot@'s ADM8211A. ok deraadt@ | |||
| 2006-02-27 | Increase delay value, fixes pr5018. | Alexander Yurchenko | |
| With a help from kettenis@, ok deraadt@. | |||
| 2006-02-27 | Workaround for bridge attachment where nothing lives behind these 'rare' | Dale Rahn | |
| bridges and attaching them causes the machine to hang. A better fix needs to be found after release. ok brad@ kettenis@ deraadt@ | |||
| 2006-02-26 | Disable alipm(4) on sparc64 if not running at the recommended 74KHz clock, to | Mark Kettenis | |
| avoid data_access_error exceptions. ok deraadt@ | |||
| 2006-02-26 | if ipmi is on the machine: instead of (confusingly) failing in match, | Theo de Raadt | |
| bail out in attach, and also say why; ok marco | |||
| 2006-02-26 | use sc->sc_dev.dv_xname consistently. | Damien Bergamini | |
| 2006-02-26 | prettify + u_int{8,16,32}_t -> uint{8,16,32}_t | Damien Bergamini | |
| 2006-02-26 | Don't touch i2c bus tag internals directly. | Alexander Yurchenko | |
| ok deraadt@ | |||
| 2006-02-26 | Print _PCT & _PPC. | Marco Peereboom | |
| 2006-02-26 | regen | Brad Smith | |
| 2006-02-26 | fix some of the ATI names. | Brad Smith | |
| 2006-02-26 | Add GRD and PCT structures. | Marco Peereboom | |
| 2006-02-26 | Let if_nfe.c compile again by putting declaration of ifp inside #ifdef | Kenneth R Westerback | |
| NFE_DEBUG. ok dlg@ | |||
| 2006-02-26 | Don't define NFE_DEBUG by default. | Jonathan Gray | |
| Set default debug level to 0. Make sure to include interface or function name in debug strings. Print Tx errors from the MAC when debug is not on. | |||
| 2006-02-26 | Print only MHz. Idea from jsg@ | Marco Peereboom | |
| 2006-02-26 | Delete some debug printing that wasn't compiling. | Marco Peereboom | |
| 2006-02-26 | Print ACPI cpu name during dmesg as well. | Marco Peereboom | |
| 2006-02-26 | Add acpicpu as a device. | Marco Peereboom | |
| ok jordan@ | |||
| 2006-02-26 | Print core frequency and power usage during dmesg. | Marco Peereboom | |
| 2006-02-26 | clean up if there is a failure to attach. | Brad Smith | |
| 2006-02-26 | Add acpicpu device. Remains disabled. | Marco Peereboom | |
| ok jordan@ | |||
| 2006-02-26 | Add _PSS. | Marco Peereboom | |
| 2006-02-26 | store the shutdown hook pointer in the softc struct. | Brad Smith | |
| 2006-02-26 | vic(4) is PCI only so make it look like a typical PCI only driver. | Brad Smith | |
| 2006-02-26 | - set baud rate in ixgb_update_link_status(). | Brad Smith | |
| - remove some FreeBSD code. - set IFM_NONE if no link. | |||
| 2006-02-25 | add vic(4) config glue. The driver is not yet enabled. | Reyk Floeter | |
| 2006-02-25 | Add vic(4), a driver for the VMware vmxnet network interface. This is | Reyk Floeter | |
| an alternative approach to the much slower pcn(4) emulation of VMware. The driver is not yet working and work in progress. ok brad@ deraadt@ | |||
| 2006-02-25 | Ugh, missed some { } | Marco Peereboom | |
| Made spurrious interrupt message more useful | |||
| 2006-02-25 | Make sure we print something for unidentified devices. | Mark Kettenis | |
| ok deraadt@ | |||
| 2006-02-25 | #undef I2C_VERBOSE; re-enable after release. | Mark Kettenis | |
| prompted by deraadt@ | |||
| 2006-02-25 | sync | Damien Bergamini | |
| 2006-02-25 | ids for intel pro/wireless 3945ABG | Damien Bergamini | |
| 2006-02-25 | comment code that is currently unused (radar detection and dynamic rx | Damien Bergamini | |
| sensitivity tuning). fix a typo while i'm here. | |||
| 2006-02-25 | instead of panicing when tx rate is zero, fallback to 1Mbps. | Damien Bergamini | |
| this is a temporary workaround since we should really not see any node with an empty rate set but it seems to happen in hostap mode. | |||
| 2006-02-25 | load the firmware only when necessary (first call to rt2661_init or if the | Damien Bergamini | |
| cardbus socket has been powered off). restore the call to rt2661_init() in the watchdog since the firmware is not reloaded in this case. fixes "timeout waiting for BBP" errors seen on some PCI adapters. | |||
| 2006-02-24 | Make the "ring buffer overrun" message a DEBUG message instead | Brad Smith | |
| of a DIAGNOSTIC message for now, this should be looked at after release. | |||
| 2006-02-24 | Make ServerWorks SATA less chatty. Sprinkle some KNF while I'm there. | Mark Kettenis | |
| ok brad@, grange@ | |||
| 2006-02-24 | Extend temperature lookup table for a wider range and provide a | Alexander Yurchenko | |
| conversion formula in the comment. | |||
| 2006-02-24 | update link status here. | Brad Smith | |
| 2006-02-24 | check for M_PKTHDR. | Brad Smith | |
| 2006-02-24 | regen | Brad Smith | |
| 2006-02-24 | add the Envy24 I/O Ctrlr | Brad Smith | |
| 2006-02-24 | regen | Brad Smith | |
| 2006-02-24 | add IC Ensemble and the Envy24 Audio controller | Brad Smith | |
 |
index : src | |
| OpenBSD base system |
| summaryrefslogtreecommitdiff |