summaryrefslogtreecommitdiff
path: root/sys/dev
AgeCommit message (Expand)Author
2006-12-26The adt7475 has a fixed address of 0x2e.Mark Kettenis
2006-12-26support adt7475; tested by dhartmeiTheo de Raadt
2006-12-26Don't re-initialize the card every time the IP address is changed.Kenneth R Westerback
2006-12-25identify adt7475Theo de Raadt
2006-12-24Make non-autonegotiated 10baseT and 100baseTX work.Mark Kettenis
2006-12-24In msk_marv_miibus_writereg, wait for busy flag to clear instead ofMark Kettenis
2006-12-24use the right size when loading the rx/tx descriptor bus dma maps.Reyk Floeter
2006-12-24ansify, no binary change, from Bret LambertPedro Martelletto
2006-12-24normally hardware engineers call it Vcc not VCCTheo de Raadt
2006-12-23Regenerate. No change except for comments being updated to reflectKenneth R Westerback
2006-12-23Spelling.Kenneth R Westerback
2006-12-23adapt to new two-level sensor api; Constantine A. MureninTheo de Raadt
2006-12-23if errors happen while reading the sdr list, give up on handling theTheo de Raadt
2006-12-23Move the handling of SCI events to the acpiec gpe handler.Can Erkin Acar
2006-12-23Correctly compute timeout value in acpi_sleep.Can Erkin Acar
2006-12-23Set IFM_ETH_MASTER if local PHY configuration resolved to MASTER.Mark Kettenis
2006-12-23Fix check for active 1000baseT media.Mark Kettenis
2006-12-23wrong printing; ok marcoTheo de Raadt
2006-12-22always include sensors.hTheo de Raadt
2006-12-22Remove never used code for a BCM5700 feature (BGE_EXTRAM) that didn'tKenneth R Westerback
2006-12-22spacingTheo de Raadt
2006-12-22Fix check for active 1000baseT media.Mark Kettenis
2006-12-22Set IFM_ETH_MASTER if local PHY configuration resolved to MASTER.Mark Kettenis
2006-12-22- Add IFM_NONE.Mark Kettenis
2006-12-22fold long lines.Marc Balmer
2006-12-22regen.Marc Balmer
2006-12-22Add two more Meinberg radio clocks.Marc Balmer
2006-12-22shorten codeTheo de Raadt
2006-12-22make driver look more like others do; ok mbalmerTheo de Raadt
2006-12-21nuke unused sc_enaddr and comment about itJason Wright
2006-12-21nuke sc_enaddr here tooJason Wright
2006-12-21betetr yet, just nuke sc_enaddr all together, just fill in arpcom andJason Wright
2006-12-21better yet, nuke all references to sc_enaddr except for the copy into arpcom....Jason Wright
2006-12-21use the arpcom copy of the ethernet address so that updates to lladdr can workJason Wright
2006-12-21even more knf loveTheo de Raadt
2006-12-21syncTheo de Raadt
2006-12-21support Avlab PCI 2S as a puc; from nicm__@ntlworld.comTheo de Raadt
2006-12-21Tweak to report full battery.Marco Peereboom
2006-12-21regenMichael Shalayeff
2006-12-21another radeon x1600; from formMichael Shalayeff
2006-12-21spacingTheo de Raadt
2006-12-21more knfTheo de Raadt
2006-12-21more minor knfTheo de Raadt
2006-12-21Remove some leftover acpiec gpe/interrupt code.Marco Peereboom
2006-12-21Remove some more remnants of old acpiec_wait function.Marco Peereboom
2006-12-21KNFMarco Peereboom
2006-12-21re_fixup_rx() is a no-op function, other than copying data to the same addres...Dale Rahn
2006-12-21Fix silly logic errors.Marco Peereboom
2006-12-21Silence acpibat significantly and shave off about 1k. Also add some smartsMarco Peereboom
2006-12-21'immediatly' -> 'immediately' in comments.Kenneth R Westerback