summaryrefslogtreecommitdiff
path: root/sys/dev
AgeCommit message (Expand)Author
2006-10-23make sure wpi_iter_func() is called at splnet.Damien Bergamini
2006-10-23simplify zyd_read_eeprom().Damien Bergamini
2006-10-23turn link led off when returning to the S_INIT state.Damien Bergamini
2006-10-23use the Sundance TC9021 ids. this was done so that stge(4) will attachBrad Smith
2006-10-23regenBrad Smith
2006-10-23add the Sundance TC9021 PCI ids.Brad Smith
2006-10-22fetch the name of the cd device attached to the atapiscsi scsibus byDavid Gwynne
2006-10-22strncpy -> strlcpyDavid Gwynne
2006-10-22Set Jumbo frame settings for Jumbo capable bge(4) adapters.Brad Smith
2006-10-22recognize the BCM5715 A3 chipset.Brad Smith
2006-10-22regenBrad Smith
2006-10-22add the ASPEED Technology vendor id, AST2000 product id and an NVIDIA MCP55Brad Smith
2006-10-22DMA memory for the TX ring should be aligned at RL_RING_ALIGN,Brad Smith
2006-10-22now with the right revision of this diff which compiles. ok pedro, mglocker.Brad Smith
2006-10-22make data LED blink upon TX.Damien Bergamini
2006-10-22make sure ni->ni_txrate is always initialized to a meaningful value byDamien Bergamini
2006-10-22replace rssadapt(9) with amrr for automatic rate control.Damien Bergamini
2006-10-22do per-node rate control.Damien Bergamini
2006-10-22Check that ni->ni_rates.rs_nrates is not greater than sizeof rs.rates inDamien Bergamini
2006-10-22oops, the eventnotify stuff was accidentally enabled with the scsiconfDavid Gwynne
2006-10-22Activate RX radiotap. We have RSSI for now.Marcus Glocker
2006-10-21does not compileTheo de Raadt
2006-10-21Fix RX handling; the chip injects control data in front and betweenMarcus Glocker
2006-10-21- Ensure that at least 16 TX descriptors are kept unused in the ring.Brad Smith
2006-10-21some extra const disease damien was testing slipped in; ok damienTheo de Raadt
2006-10-21huge diff to bring zyd(4) into a working state.Damien Bergamini
2006-10-21syncDamien Bergamini
2006-10-21Intel PRO/Wireless 3965ABGDamien Bergamini
2006-10-21rework the bus scanning code by splitting it out into separate functionsDavid Gwynne
2006-10-20use the ASIX AX88190 defines from ax88190reg.h and remove someBrad Smith
2006-10-20some defines for the ASIX AX88790 chipset.Brad Smith
2006-10-20some new flags.Brad Smith
2006-10-20sync some comments with the NetBSD driver.Brad Smith
2006-10-20remove another chunk of unused NetBSD code.Brad Smith
2006-10-20remove some NetBSD code.Brad Smith
2006-10-20ansiBrad Smith
2006-10-20remove the IFM_100_T4 switch case for the manual media code, brgphy(4)Brad Smith
2006-10-20attach for the Broadcom BCM5755 ASIC based chipsets as well.Brad Smith
2006-10-20regenBrad Smith
2006-10-20add PHY id for the Broadcom BCM5755 ASIC based chipsets.Brad Smith
2006-10-20move the Jumbo frame settings and Ethernet@Wirespeed code into separateBrad Smith
2006-10-19make the exit label naming scheme match the current function names, removesBrad Smith
2006-10-19Overhaul the transmit path:Brad Smith
2006-10-19add a PHY workaround for the 5787 ASIC based chipsets.Brad Smith
2006-10-19Rearrange the code a bit, rename a few functions and make brgphy(4) useBrad Smith
2006-10-19Reduce the scope of the locks.Marco Peereboom
2006-10-19KNF and some cleanupMarco Peereboom
2006-10-19Fix hopefully the last wscons jump scrolling glitch, which can occurDimitry Andric
2006-10-19regenJonathan Gray
2006-10-19Support later versions of the ASUS WL-167g which have switchedJonathan Gray
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-18 18:37:20 +0000