summaryrefslogtreecommitdiff
path: root/sys/dev
AgeCommit message (Expand)Author
2009-11-10backout the backout marco did of my code because of the NO_CCB breakage.David Gwynne
2009-11-09Every selwakeup() should have a matching KNOTE() (even if kqueue isn'tNicholas Marriott
2009-11-09Link state change interrupt was not generated due to a missing bit inDavid Gwynne
2009-11-09syncStuart Henderson
2009-11-09- remove wrongly-sorted duplicate entriesStuart Henderson
2009-11-08regenDamien Bergamini
2009-11-08- remove non-production pci ids for 6050 3x3Damien Bergamini
2009-11-07Blink leds on the DEC 3000 models (three different led types).Miod Vallat
2009-11-07Change sgi system identification from a single system type list, to a smallerMiod Vallat
2009-11-06cosmetic. claudio@ okFederico G. Schwindt
2009-11-05Add a new PCIOCGETROMLEN ioctl, to give users of PCIOGETROM a chance toMark Kettenis
2009-11-05sort pci_matchid's, from Brad.Stuart Henderson
2009-11-05bump copyrightsMarco Peereboom
2009-11-05Make compile on 32 bit as well.Marco Peereboom
2009-11-05The big diff dlg committed to the midlayer breaks NO_CCB andMarco Peereboom
2009-11-05BUS_DMA_NOCACHE is defined on all archs that include this driverJacob Meuser
2009-11-04Get rid of __HAVE_GENERIC_SOFT_INTERRUPTS now that all our platforms support it.Mark Kettenis
2009-11-04regenDamien Bergamini
2009-11-04the hybrid 6000 series (using both internal and external power amplifiers)Damien Bergamini
2009-11-03s/TX_IQ_PERD/TX_IQ_PERIODIC/Damien Bergamini
2009-11-03use BUS_DMA_{READ,WRITE} hints when mapping mbufs for Rx/Tx evenDamien Bergamini
2009-11-03setting of WEP keys is defered until interface is brought up,Damien Bergamini
2009-11-03gpio quirk for Dell Precision M4400. from Geoff Sanders. thanks!Jacob Meuser
2009-11-03don't take playback blocksize constraints into account when roundingJacob Meuser
2009-11-03don't claim to support full-duplex if the device doesn't support bothJacob Meuser
2009-11-03provide a get_default_params method. tries aucat(1) defaults firstJacob Meuser
2009-11-03rewrite supported audio parameter matching codeJacob Meuser
2009-11-03Simplify and remove debug cruft from interrupt handler. Original diff fromMarco Peereboom
2009-11-02Don't write bogus values to reply_fifo_host_signalling_addr. This registerMarco Peereboom
2009-11-02s/hz/Hz/ on multiples of the SI unit hertz other than MHz.Igor Sobrado
2009-11-02Remove unused member(s) of `struct acpi_softc'.Mark Kettenis
2009-11-02Add support for ``M-Audio Revolution 5.1'' cards, based on envy24HT.Alexandre Ratchov
2009-11-02correct signature. no change as function is if 0'd.Federico G. Schwindt
2009-11-01Move IS[12]BYTEMSG and ISEXTMSG defines to a common place.Federico G. Schwindt
2009-11-01Call selwakeup()/KNOTE() even if the queue has emptied completely.Nicholas Marriott
2009-11-01kqueue support for midi(4).Nicholas Marriott
2009-11-01call powerhook_disestablish() and pci_intr_disestablish() earlier.Damien Bergamini
2009-11-01- fix rx chain mask in scan commandDamien Bergamini
2009-11-01add support for the ati sb900^Whudson2 chips.David Gwynne
2009-10-31in the absense of link state handling, drivers should still be silent; ok miodTheo de Raadt
2009-10-31KNOTE() after selwakeup(); ok miodTheo de Raadt
2009-10-31s/Mhz/MHz/, MHz is a multiple of the SI unit hertz (whose symbol is Hz).Igor Sobrado
2009-10-31Use suser when possible. Suggested by miod@.Federico G. Schwindt
2009-10-31reorder operations in detach(), call powerhook_disestablish() earlier,Damien Bergamini
2009-10-31Add missing KNOTE() calls after selwakeup(), until we decide if the KNOTE()Theo de Raadt
2009-10-31Make sure the descriptor is writable for some operations.Federico G. Schwindt
2009-10-30KNOTE() after selwakeup()Theo de Raadt
2009-10-29When probing devices at boot, compare against the full device driver nameJoel Sing
2009-10-29Make sure the descriptor is writable for some operations. Pointed by miod@.Federico G. Schwindt
2009-10-28a few leftovers from yesterday's SCCS/RCS-ID removal;Ingo Schwarze