summaryrefslogtreecommitdiff
path: root/sys/dev
AgeCommit message (Collapse)Author
2005-10-29Correct type for dd_grid, so that we print the device id correctly forMiod Vallat
byte-mode roms.
2005-10-28correct legsup register per spec; dlg@ pascoe@ ok.Federico G. Schwindt
2005-10-28regenBrad Smith
2005-10-28add some Symbios Logic ids including SAS and FC chipsets.Brad Smith
2005-10-27use a quirk to attach the new sierra wireless; tony@kozoru.comTheo de Raadt
2005-10-27new sierra card; tony@kozoru.comTheo de Raadt
2005-10-27- __sparc__ -> __sparc64__Brad Smith
- unmap resources allocated by pci_mapreg_map() on failure to attach - fixup PCI interrupt string printing and surrounding code to be more consistent with other drivers
2005-10-26add missing bus_dmamap_sync()'s, much closer to working on hppaBrad Smith
though it still falls over with NFS builds. From: FreeBSD ok deraadt@
2005-10-26revert 82801FBM SATA controller back to being configured as an IDE controllerBrad Smith
until someone can figure out why it works on some systems and not on others.
2005-10-26regenBrad Smith
2005-10-26fix some Intel chipset names.Brad Smith
2005-10-26use the MI atop() macro for alpha and mipsMartin Reindl
2005-10-26syncTheo de Raadt
2005-10-26oopsTheo de Raadt
2005-10-26syncTheo de Raadt
2005-10-26new digi puc; bsw71@mail.ruTheo de Raadt
2005-10-26regenBrad Smith
2005-10-26add Compaq iLO controllersBrad Smith
2005-10-26Adapt art(4) to the new link state handling done by sppp(4).Claudio Jeker
Now blinkenlights realy work like a charm -- OK cHDLC reports always linkstate active but that is a problem inside sppp(4).
2005-10-25dont' -> don't in comments;Jason McIntyre
from ray lai;
2005-10-24Revamp interrupt handling in em(4) driver:Brad Smith
o Do not mask the RX overrun interrupt. o Rewrite em_intr(): - Axe EM_MAX_INTR. - Cycle acknowledging interrupts and processing packets until zero interrupt cause register is read. - If RX overrun comes in log this fact. From glebius FreeBSD ok krw@ beck@
2005-10-24Remove panic if polling thread can not be created.Marco Peereboom
ok jordan@
2005-10-24fix compilation for KGDB; looked by miod@.Federico G. Schwindt
2005-10-24change read/write callbacks to use a void * instead of struct rtw_regs.Reyk Floeter
why? rtw uses the smc93cx6 EEPROM and a separate diff will allow accessing it without depending on the bus_space_* functions. this is required for the RTL8187L. discussed with jsg@
2005-10-24two sc_anaparm registersReyk Floeter
2005-10-24fix RTW_DEBUGReyk Floeter
2005-10-24change RTW_ANAPARM to RTW_ANAPARM_0 for consistency with the rtl8225 code.Reyk Floeter
ok jsg@
2005-10-24- remove some redundnt checks before pci_mapreg_map()Brad Smith
- iosize -> size
2005-10-24add a comma here.Brad Smith
2005-10-23regenBrad Smith
2005-10-23add Davicom DM9132Brad Smith
2005-10-23regenBrad Smith
2005-10-23better like thisBrad Smith
2005-10-23regenBrad Smith
2005-10-23add Znyx Networks vendor id.Brad Smith
2005-10-23Move rtw_attach error condition handling out of rtw_detach and intoJonathan Gray
rtw_attach simplifying things in the process. ok reyk@
2005-10-23use read/write/barrier callbacks, will be used laterReyk Floeter
ok jsg@
2005-10-23knfReyk Floeter
2005-10-23Some additional rtl8185 specific defines.Jonathan Gray
2005-10-22shorten ne(4) dmesg entries from 2-3 lines to 1.Brad Smith
Thanks to Han Boetes for testing on an isapnp card.
2005-10-22check for 82801FBM SATA in one more spot.Brad Smith
2005-10-2282801FBM_IDE -> 82801FBM_SATABrad Smith
2005-10-22regenBrad Smith
2005-10-22Intel PCI id 2653 is actually a SATA controller on the ICH6-M andBrad Smith
not an IDE controller.
2005-10-21tidy up dmesg printing.Brad Smith
2005-10-21tidy up dmesg printing a bit, makes PCI hme only take 2 linesBrad Smith
per interface instead of 3.
2005-10-21pretty up dmesg outputTheo de Raadt
2005-10-21A bit more registers from the Linux sata_svw.c driver.Alexander Yurchenko
2005-10-21Zap return at the end of a void function. No binary change.Alexander Yurchenko
2005-10-21Remove unused global adapter linked list.Brad Smith
From FreeBSD