| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2010-02-22 | 0x19d2 is most likely a ZTE and not a Qualcomm vendor ID. | Marco Pfatschbacher | |
| Too bad usb.org doesn't like to keep their lists updated, so we have to resort to guessing here... OK jsg@ | |||
| 2010-02-22 | 0x19d2 is most likely a ZTE and not a Qualcomm vendor ID. | Marco Pfatschbacher | |
| Too bad usb.org doesn't like to keep their lists updated, so we have to resort to guessing here... Also add ZTE MF637 HSUPA USB modem. OK jsg@ | |||
| 2010-02-22 | Undo 1.48 and 1.49 for now, and go back to the drawing board; PR #6320 | Miod Vallat | |
| 2010-02-22 | regen | Jonathan Gray | |
| 2010-02-22 | Add some more 82599 ids from the FreeBSD driver. | Jonathan Gray | |
| 2010-02-21 | Make sure athn_intr() returns 1 if it claims an interrupt and 0 if not, | Mark Kettenis | |
| instead of the other way around. Fixes interrupt accounting. ok damien@ | |||
| 2010-02-21 | sync | Theo de Raadt | |
| 2010-02-21 | the 82597EX is LR or SR, not only LR | Theo de Raadt | |
| 2010-02-21 | sync | Theo de Raadt | |
| 2010-02-21 | new plx goo, all the time | Theo de Raadt | |
| 2010-02-20 | Instead of defining le16_to_cpu to nothing use letoh16 so this | Jonathan Gray | |
| is slightly less likely to explode on big endian systems. Stupidity present in the original FreeBSD code as well. | |||
| 2010-02-20 | Make use of PHY port numbers as targets for the drives instead | Marco Peereboom | |
| of the internal PhysDriveNum. Also change ENXIO to EINVAL in one case. From: Mike Belopuhov <mkb@crypt.org.ru> Discussed with Jim Giannoules | |||
| 2010-02-20 | - implements bioctl support; | Marco Peereboom | |
| - fixes hot-un-plugging w/ softeps; - improves performance; - fixes IPL levels; - fixes lots of small things; - does a little bit of cleanup; - fixes NOWAIT/WAITOK; - disables useless/unused Driver Persistent Mapping code From Mike Belopuhov <mkb@crypt.org.ru> Discussed with Jim Giannoules | |||
| 2010-02-20 | Add necessary bits to support AC97 codecs in envy and add support | Alexandre Ratchov | |
| for the VIA Tremor 5.1 card. From Alexandr Shadchin <alexandr.shadchin at gmail.com>, thanks! help from oga@ | |||
| 2010-02-20 | minor tweak to improve consistency with other drivers; startup | Igor Sobrado | |
| messages are usually lower case (exceptions are manufacturer codenames as "Pentium" or "Horse"). | |||
| 2010-02-20 | regen | Jonathan Gray | |
| 2010-02-20 | Match on new CH341A in uchcom and correctly name the CH340 device, | Jonathan Gray | |
| from looking at the windows driver. | |||
| 2010-02-19 | Work with pre-standard revision A ProCurve Direct Attach Cables. | Jonathan Gray | |
| Also let the 82598EB SFP+ card work with optical SFP+ modules by ignoring the EEPROM even though the card officially supports only copper (DA) cables. From and ok claudio@ | |||
| 2010-02-19 | Partial sync to the latest version of ixgbe in FreeBSD leaving things | Jonathan Gray | |
| like if_ix.c mostly untouched for now. This brings in support for newer 82598 parts and adds several things that will be needed for 82599. Initially from claudio with some additions by me. Tested by claudio, dlg (earlier version) and myself on different cards and media types. ok claudio@ | |||
| 2010-02-19 | fix run_set_region_4 to set the whole region specified, | Damien Bergamini | |
| not a quarter of it! | |||
| 2010-02-19 | Make this truly MI: | Miod Vallat | |
| - remove (unused) MSR defines and x86 specific <machine/cpufunc.h> include - default sc_dmamap_flags to BUS_DMA_COHERENT | |||
| 2010-02-19 | Move auglx(4) from i386-only land to MI land. | Miod Vallat | |
| (auglx.c is not modified in this commit yet, only moved around) | |||
| 2010-02-19 | Add a datasheet URL for reference. | Miod Vallat | |
| 2010-02-19 | Add a driver for the M41T8x time-of-day clock chips, such as the M41T83 | Miod Vallat | |
| found on the Gdium Liberty. These machines finally no longer complain about a missing todclock. | |||
| 2010-02-18 | do not zero fields which are already zero; from cnst | Theo de Raadt | |
| 2010-02-18 | fix a few capitalizations of QLogic. | Igor Sobrado | |
| 2010-02-18 | improve startup messages displayed by isp(4) in such a way entries | Igor Sobrado | |
| printed by this driver in dmesg are more standard (and short); while here, fix the capitalization of QLogic. ok krw@ | |||
| 2010-02-17 | Make sure we claim the interrupt as ours if the time out bit is set in the | Mark Kettenis | |
| interrupt status register. Fixes a problem with spurious interrupts on the fuloong. ok miod@ | |||
| 2010-02-17 | read calibration version from ROM and set IWN_GP_DRIVER_CALIB_VER6 | Damien Bergamini | |
| bit on 6x50 if version>=6. | |||
| 2010-02-17 | KNF | Paul Irofti | |
| 2010-02-17 | change constant of convert formulra of SHT1X sensor to fit | Yojiro Uo | |
| TEMPerHUM hardware. (It uses 3.38-3.48V as SHT1X's VDD). mentiond by Michael Fuckner | |||
| 2010-02-16 | fix AR_DTIM_PERIOD | Damien Bergamini | |
| 2010-02-16 | Recognize the BCM57780 PHY, tested by bruce on tech@. | Stuart Henderson | |
| From Brad, ok jsg@ kettenis@ | |||
| 2010-02-16 | sync | Stuart Henderson | |
| 2010-02-16 | Add BCM57780, from Brad. ok jsg@ kettenis@ | Stuart Henderson | |
| 2010-02-16 | Use i2c_addr_t as the type for the init_xfer function because this | Michael Knudsen | |
| is what the function pointer type uses. ok grange | |||
| 2010-02-15 | regen | Damien Bergamini | |
| 2010-02-15 | add MSI (Micro Star International) vendor and RT3090 product id | Damien Bergamini | |
| 2010-02-15 | Properly detect when the band changes from 2GHz to 5GHz and | Damien Bergamini | |
| vice-versa, and do a full reset of the chip when it happens. This does not affect the AR9280 since a full reset is always necessary when the channel changes. Should fix dual-band AR5416 devices (problem reported by Rivo Nurges). | |||
| 2010-02-15 | - handle SIOCS80211CHANNEL in monitor mode without doing a full reset | Damien Bergamini | |
| - call athn_set_multi on SIOCADDMULTI/SIOCDELMULTI | |||
| 2010-02-14 | The ASIC does not like PCI bursts on registers because of a silicon bug. | Damien Bergamini | |
| To prevent PCI read or write bursts, we issue a read to a non-contiguous register before accessing a register. This problem does not show up on the x86 architecture since the memory model makes it almost impossible to generate PCI bursts without doing DMA. This bug is "documented" in the Ralink Linux driver as: "//Patch for ASIC turst read/write bug, needs to remove after metel fix" This fix makes the RT2561S chip on the Gdium (loongson) work. It fails to load the firmware without it. Tested by miod@ of the Gdium (slightly different diff though) | |||
| 2010-02-13 | Force chunks into correct order once metadata is attached. This prevents | Joel Sing | |
| chunks from being reordered on an existing volume. ok marco@ | |||
| 2010-02-13 | Unbreak automatic rebuilds from hotspares. | Joel Sing | |
| ok marco@ | |||
| 2010-02-13 | Removed unused variable sml_vn. | Joel Sing | |
| ok @marco | |||
| 2010-02-13 | Pass the number of chunks to sr_meta_attach() rather than recalculating. | Joel Sing | |
| ok marco@ | |||
| 2010-02-11 | "unmute" GPIO 0 on all Dell machines with IDT 92HD71B7 codecs. | Jacob Meuser | |
| desilences E4300 for drahn@. ok drahn@ | |||
| 2010-02-11 | No need for M_CANFAIL if M_NOWAIT is used. Found by Gleydson Soares. | Claudio Jeker | |
| OK mk@ | |||
| 2010-02-10 | Only allow the common voltages of the card and the host when writing the OCR | Dale Rahn | |
| back to the card. fixes a problem where the controller supported lower voltages than the card. With variable name change requested miod, ok miod@ krw@ | |||
| 2010-02-10 | check that rf reg is != 0xff, not rf val. | Damien Bergamini | |
| 2010-02-09 | Build ral firmware on loongson (for Gdium). | Miod Vallat | |
 |
index : src | |
| OpenBSD base system |
| summaryrefslogtreecommitdiff |