Age | Commit message (Expand) | Author |
2008-04-03 | Ensure that we wrap around to the start of the TXD buffer when incrementing | Joel Sing |
2008-04-02 | Add support for the National Semiconductor Saturn (which really is a Sun | Mark Kettenis |
2008-04-02 | Add support for the DP83865. | Mark Kettenis |
2008-04-02 | regen | Mark Kettenis |
2008-04-02 | Add the National Semiconductor DP83865 Gigabit PHY. | Mark Kettenis |
2008-04-02 | fix bad printf if metadata clearing failed | Martin Reindl |
2008-04-02 | regen | Brad Smith |
2008-04-02 | Add the Cicada CS8204 quad port PHY. | Brad Smith |
2008-04-02 | Return right away for unknown media types instead of falling | Brad Smith |
2008-04-02 | sync | Theo de Raadt |
2008-04-02 | intel host bridge | Theo de Raadt |
2008-04-02 | attach the ZTE CMDMA MSM modem from qualcomm. | Felix Kronlage |
2008-04-02 | regen | Felix Kronlage |
2008-04-02 | add another vendor id for Qualcomm as well as one of their modems. | Felix Kronlage |
2008-04-02 | Correct error message printing and add a missing error | Brad Smith |
2008-04-01 | Add Corega CG-WLUSB2GPX. | Jonathan Gray |
2008-04-01 | regen | Jonathan Gray |
2008-04-01 | Corega CG-WLUSB2GPX | Jonathan Gray |
2008-04-01 | toast unused args from a printf call; ok deraadt | Constantine A. Murenin |
2008-04-01 | match more versions of w83793g; whilst here, also ensure that the bank 0 | Constantine A. Murenin |
2008-04-01 | Add some defines and remove some of the magic numbers from the code. | Brad Smith |
2008-04-01 | only need 8 words to learn about i2c spd jc-42.4 sensors | Theo de Raadt |
2008-03-31 | if iobase is 0, lm child is not configured by the bios; ok kettenis | Theo de Raadt |
2008-03-31 | Add define for 24 hour time. | Joel Sing |
2008-03-30 | Add code to configure the vendor specific opcodes of the SPI Flash. | Joel Sing |
2008-03-30 | Enable setting of interrupt timers. | Joel Sing |
2008-03-30 | Pad the RXD buffer so that packets are aligned on a 128-byte boundary. This | Joel Sing |
2008-03-30 | todd@ has 82c686 based auvia(4) devices that do full-duplex | Jacob Meuser |
2008-03-27 | add detach support. this has to be the easiest diff for hotplug ever, go | David Gwynne |
2008-03-27 | test the Vdd registers of Andigilog chips against the minimum voltage readings; | Constantine A. Murenin |
2008-03-27 | update the revision cpuid table, removing three duplicate ids from "JH-F" | Constantine A. Murenin |
2008-03-27 | welcome kate(4), a new driver supporting AMD K8 temperature sensors | Constantine A. Murenin |
2008-03-26 | plug a mem leak. the array of ports wasnt freed on detach. | David Gwynne |
2008-03-26 | Add DIOCRLDINFO support. | Kenneth R Westerback |
2008-03-24 | auvia(4) doesn't record properly, so don't claim full-duplex | Jacob Meuser |
2008-03-24 | 8-bit has been emulated for some time now. quit lying. | Jacob Meuser |
2008-03-24 | Change XXgetdisklabel() to the 'normal' four parameter model to | Kenneth R Westerback |
2008-03-23 | Sometimes the registers claiming the aperture size on 9XX chipsets lie. | Owain Ainsworth |
2008-03-23 | regen | Miod Vallat |
2008-03-23 | More 3DLabs devices. | Miod Vallat |
2008-03-23 | Add AGP support for the Intel G33 chipset. | Damien Bergamini |
2008-03-23 | New andl(4) driver for Andigilog aSC7611 Hardware Monitor. | Constantine A. Murenin |
2008-03-22 | Add support for DIOCRLDINFO, DIOCGPDINFO, DIOCGPART to the fd | Kenneth R Westerback |
2008-03-22 | remove unused fields from envy_softc structure, no functional change | Alexandre Ratchov |
2008-03-22 | add audio(4) driver the ability to use different block sizes for play and | Alexandre Ratchov |
2008-03-22 | when setting the block size, use the scale factor only once in | Alexandre Ratchov |
2008-03-22 | Add a bunch of uslcom devices found in the Linux driver. | Jonathan Gray |
2008-03-22 | regen | Jonathan Gray |
2008-03-22 | Add a bunch of uslcom devices found in the Linux driver. | Jonathan Gray |
2008-03-21 | Add defines for 1Gbps/2.5Gbps fiber interfaces. | Brad Smith |