summaryrefslogtreecommitdiff
path: root/sys/dev
AgeCommit message (Expand)Author
2006-07-08Add Topic Semiconductor OUI and a few IC Plus 10/100 and 10/100/1000 PHY models.Brad Smith
2006-07-08add the ATI IXP300 SATA PCI id.Brad Smith
2006-07-08regenBrad Smith
2006-07-08add the ATI IXP300 SATA PCI id.Brad Smith
2006-07-08don't add 1000Mbps media types for a 10/100 only PHY.Brad Smith
2006-07-08print the chipset revision too.Brad Smith
2006-07-08shorten dmesg entry from two lines to one.Brad Smith
2006-07-08tulip_pci_(probe/attach) -> tulip_(probe/attach)Brad Smith
2006-07-08remove splnet from attach routine.Brad Smith
2006-07-07RegenPedro Martelletto
2006-07-07Add Microdia, okay miod@Pedro Martelletto
2006-07-07Broadcom HT-1000 SATA no longer requires IDE_PCI_CLASS_OVERRIDE now thatBrad Smith
2006-07-07use nested if-else to eliminate the need for a second polling printf,Brad Smith
2006-07-07Sync up to Intel's latest FreeBSD em driver (6.0.5). Adds supportBrad Smith
2006-07-07Check for SATA and RAID subclasses if we have a matching PCI ID.Jonathan Gray
2006-07-06acquiration -> acquisition (so that eyes stop bleeding)Miod Vallat
2006-07-06get rid of the unused sgl types (and the XXX on the one we actually doDavid Gwynne
2006-07-06fix debugging stuffDavid Gwynne
2006-07-06after walking the attached devices and running ppr against them, then fetchDavid Gwynne
2006-07-06do not stash pages 2 and 3 (the volume and physdisk pages respectively)David Gwynne
2006-07-06stash a pointer to the scsibus attached to us so we dont have to walk theDavid Gwynne
2006-07-06Write the mac address into the registers CORRECTLY!Dale Rahn
2006-07-05check if the requests for the config pages were completed successful,David Gwynne
2006-07-05revert back to the older driver as this causes some breakage.Brad Smith
2006-07-04Back out the workaround committed in rev 1.13 now that we no longer blindlyMark Kettenis
2006-07-04Add some more pci ids that I forgot to commit.Marco Peereboom
2006-07-04Do not blindly enable io and mem space for all matched PCI devices. This isMark Kettenis
2006-07-04cleanup in zyd_openpipes(); no functional change. OK jsg@.Xavier Santolaria
2006-07-04Harcoded hex values for control field don't work soJonathan Gray
2006-07-03Sync up to Intel's latest FreeBSD em driver (6.0.5). Adds supportBrad Smith
2006-07-03minor knf; ok jsg@.Xavier Santolaria
2006-07-03in zyd_start():Xavier Santolaria
2006-07-03- re_attach(): Use bus_dma* directly instead of calling re_allocmem().Brad Smith
2006-07-03regenBrad Smith
2006-07-03add PMC-Sierra OUI.Brad Smith
2006-07-03regenBrad Smith
2006-07-03add Level 1 LXT1000 ids.Brad Smith
2006-07-02If ieee80211_encap() returns NULL the node is already free,Jonathan Gray
2006-07-02put writing of RL_IDR0 and RL_IDR4 back to how they should be.Brad Smith
2006-07-02Move some of the verbose debug printfs like dumping packetsJonathan Gray
2006-07-02Send management frames at 1Mbit for better compatibility/chanceJonathan Gray
2006-07-02Rename several functions for consistency/simplicity.Jonathan Gray
2006-07-02Support for adapters with Airoha AL2230 radios from Florian.Jonathan Gray
2006-07-02Fix channel frequency/flags in radiotap structures.Jonathan Gray
2006-07-01fix the hw rev id for the 8168 and add the id for the 8111Brad Smith
2006-07-01(fxp/re)_attach_common -> (fxp/re)_attachBrad Smith
2006-07-01always report the channel as type 802.11b (IEEE802_CHAN_B) in theReyk Floeter
2006-07-01update the 802.11 address as well if the interface mac address hasReyk Floeter
2006-07-01Make sure the color selection escape sequences use black for 0 and white for 7,Miod Vallat
2006-07-01add the raid physical disk config pages. fix the macros in the raid volumeDavid Gwynne
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-10 11:03:36 +0000