summaryrefslogtreecommitdiff
path: root/sys/dev
AgeCommit message (Expand)Author
2007-06-03shuffle the raid 1 specific functions to be all together and closerTed Unangst
2007-06-03Implement transmission of ACL and SCO packetsUwe Stuehler
2007-06-03Make RX path work on big endian, too.Marcus Glocker
2007-06-03delete two extra lines which are not needed because that is how stringsTheo de Raadt
2007-06-03virtual device drivers tend not to need machine/bus.h. also importantTheo de Raadt
2007-06-03The firmware converts every 802.11 RX data frame into a 802.3 frame,Marcus Glocker
2007-06-03During autoassemble get the actual raid level instead of always 1.Marco Peereboom
2007-06-02Add support for ICH8M IDE.Jonathan Gray
2007-06-02regenJonathan Gray
2007-06-02Add some devices found on an Intel 965GM/ICH8M laptop.Jonathan Gray
2007-06-02little fixes to get hotkeys working again. from alexey vatchenkoTed Unangst
2007-06-02Disable crypto until we figure out proper key management and other stuffMarco Peereboom
2007-06-02Fix collision by not adding data length but blocks instead.Marco Peereboom
2007-06-02split up large CMD53 reads and writesUwe Stuehler
2007-06-02retry reading HCI packets a few times before giving upUwe Stuehler
2007-06-02Add optional metadata element. This will be needed in the future forMarco Peereboom
2007-06-02Redo the sense mechanism to become autosense instead of request sense.Marco Peereboom
2007-06-01Add RX path and enable monitor mode.Marcus Glocker
2007-06-01remove strings from sensor.desc which are now present in sysctl variable name...Constantine A. Murenin
2007-06-01remove ofw devices which we don't use; that way of mixing devices is crazyTheo de Raadt
2007-06-01check return value of findblkmajor; this fixes a crash on vax during boot.Marco Peereboom
2007-06-01remove strings from sensor.desc which are now present in sysctl variable name...Constantine A. Murenin
2007-06-01Add additional flag to indicate that we have a metdadata io pending; thisMarco Peereboom
2007-06-01initialize the ringsReyk Floeter
2007-06-01Check return code for resource allocation.Marco Peereboom
2007-06-01Remove more Free(?)BSD and NetBSD #ifdef/#endifs. No functional norMarc Balmer
2007-06-01Remove the hci_enable now done in a higher layer.Gordon Willem Klok
2007-06-01Only probe phy's at address 0; gets rid of bogus phy's on theMark Kettenis
2007-06-01save metdata in context using dlg and tedu's shiny new workq api.Marco Peereboom
2007-06-01Don't initialize d_partitions[RAW_DISK] just before callingKenneth R Westerback
2007-05-31don't print debug messagesUwe Stuehler
2007-05-31Clean up and fix sbt_write_packet()Uwe Stuehler
2007-05-31switch wskbd hotkeys over to workq. this eliminates quite a bit of code,Ted Unangst
2007-05-31further improvement of the bus space i/o. firmware loading, booting,Reyk Floeter
2007-05-31Redo the syncer to be a little smarter on interaction while shutting downMarco Peereboom
2007-05-31enable all debugging messages by default if the driver is compiled withReyk Floeter
2007-05-31fix the myx_write functionReyk Floeter
2007-05-31Fix redundancy for RAID 1. Now one can pull a disk and continue running.Marco Peereboom
2007-05-31An SDIO Bluetooth driver, only initial bits and therefore not enabled yetUwe Stuehler
2007-05-31add myx(4)Reyk Floeter
2007-05-31erroneously EINVAL is always reported where the functionDavid Gwynne
2007-05-31if poking the controller fails for whatever reason the drives'David Gwynne
2007-05-31import the Myricom Myri-10G firmwareReyk Floeter
2007-05-31initial bits of a new driver for the Myricom Myri-10G Lanai-Z8E 10GbReyk Floeter
2007-05-31remove the scsi task thread, and replace it with the system workq.David Gwynne
2007-05-31Remove more #ifdef/#endif's that checked for other bsds. No binaryMarc Balmer
2007-05-31Make powernow-k8 on amd64 and i386 use the _PSS object from acpi toGordon Willem Klok
2007-05-31Remove some #ifdef {Free|Net}BSD/#endif to make the code more readable.Marc Balmer
2007-05-31use the right capitalization for `MBus' and `SBus'Igor Sobrado
2007-05-31Add SDIO card interrupt handling codeUwe Stuehler
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-03 19:17:17 +0000