| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2008-05-28 | Turns out I have an ISP 12160 myself, and it works fine on sparc64. Since | Mark Kettenis | |
| a fix has been made that might make the 10160 work too, enable support again. ok miod@ | |||
| 2008-05-28 | Don't try reading the SXP_PINS_DIFF on the 10160 and 12160 SCSI controllers. | Mark Kettenis | |
| The registers seems to return 0 on my 12160 and there are some indications that it doesn't really exist. This may fix panics seen with the 10160 on sparc64 machines. ok krw@ | |||
| 2008-05-28 | sync | Pierre-Yves Ritschard | |
| 2008-05-28 | Add support for Option GlobeTrotter 3G+ cards as distributed by Orange | Pierre-Yves Ritschard | |
| in umsm. ok jsg@ | |||
| 2008-05-27 | only look up the initiator-id for SPI (aka "real scsi") controllers on | David Gwynne | |
| sparc64. this prevents us from setting the initiator id on sas and fc hbas. the scsi midlayer doesnt probe for targets at the initiator id address, so if we set this on fc and sas hbas (which dont really have a real scsi address on the bus), then we're preventing them from finding potential targets at that address. ok kettenis@ | |||
| 2008-05-27 | Don't print SCSI ID, it's redundant now that scsibus(4) prints the same | Mark Kettenis | |
| information. ok deraadt@ | |||
| 2008-05-27 | return 1 when an irq's been handled, not 0. | Owain Ainsworth | |
| 2008-05-27 | Since the vtophys stuff was nuked, drm now works on amd64 too. Add the | Owain Ainsworth | |
| relavent config goo. DRM_NO_MTRR is still needed on amd64 since the mtrr apis differ between it and i386. ok kettenis@. | |||
| 2008-05-27 | When i first ported the drm, i completely misunderstood the FreeBSD taskqueue | Owain Ainsworth | |
| api. So drm_locked_tasklet() is wrong. Fix this up to be at least mostly correct. | |||
| 2008-05-27 | Fix jiffies. | Owain Ainsworth | |
| 2008-05-27 | Don't fail to compile when not in debug mode. | Marcus Glocker | |
| 2008-05-27 | Instead alloacting a fix frame buffer we allocate the maximum frame size | Marcus Glocker | |
| delivered by the device (dwMaxVideoFrameSize). Also check for too large frames (buffer overflow), they get skipped. | |||
| 2008-05-27 | Don't print SCSI ID, it's redundant now that scsibus(4) prints the same | Mark Kettenis | |
| information. | |||
| 2008-05-27 | Add ZyXEL G-202, which was already in usbdevs. | Jonathan Gray | |
| From/tested by pedro@am-gen.org | |||
| 2008-05-26 | Add more ioctl's (still unfinished); VIDIOC_ENUM_FMT, VIDIOC_ENUMINPUT, | Marcus Glocker | |
| VIDIOC_S_INPUT, VIDIOC_TRY_FMT. Allows me at least to use a small V4L2 compatible webcam application to capture some images. | |||
| 2008-05-26 | On sparc64, fetch "scsi-initiator-id" property from the firmware, and use | Mark Kettenis | |
| it to tweak to SPI port configuration. Makes the PRIMEPOWER 250 happy when netbooting. | |||
| 2008-05-26 | Limit to 80 char width and tweak comments for readability. | Jonathan Gray | |
| 2008-05-26 | Properly handle usbd_get_interface_descriptor() returning NULL. | Jonathan Gray | |
| From Jacek Masiulaniec <jacekm@dobremiasto.net> | |||
| 2008-05-26 | Count output packets. | Brad Smith | |
| From DragonFly ok dlg@ | |||
| 2008-05-25 | use ac97 default parameters for auich(4), auixp(4) and auvia(4). | Jacob Meuser | |
| they may have codecs which only handle 48kHz sampling rates. ok ratchov@ | |||
| 2008-05-25 | add a function to get default parameters for ac97 codecs. all ac97 | Jacob Meuser | |
| codecs support 16-bit stereo slinear_le @ 48kHz. ok ratchov@ | |||
| 2008-05-25 | tweak the SPI port configuration if we figure out that it is not quite | David Gwynne | |
| right, in particular the adapters scsi id on the bus. requested by kettenis@ who is having trouble with the scsi controller on the primepower 250. | |||
| 2008-05-25 | Don't define EHCI_DEBUG when USB_DEBUG is defined. This to be consistent | Marc Balmer | |
| with other USB host controller interfaces. From Karl Sjodahl <dunceor@gmail.com>; ok jsg | |||
| 2008-05-25 | Spacing. Comments. strncpy() -> strlcpy(). | Marcus Glocker | |
| 2008-05-25 | Remove redundant enabling of bus master which pci_mapreg_map() deals | Brad Smith | |
| with. ok dlg@ | |||
| 2008-05-25 | Remove redundant enabling of memory space and bus master which | Brad Smith | |
| pci_mapreg_map() deals with. ok jakemsr@ | |||
| 2008-05-24 | Add a quirk to prevent this LCD device from attaching as a HID. This is a | Chris Kuethe | |
| not somewhere we want to go in the long term - adding a quirk for every device out there that does something a little funky. It would be better if devices that claimed they are HIDs actually acted like it. Failing that, passing usb commands though uhid would be nice. | |||
| 2008-05-24 | - Enable userland to read(2) video stream from /dev/video. | Marcus Glocker | |
| - Prepare for mmap(2). | |||
| 2008-05-24 | Sync the ATI IXP200 PCI id. | Brad Smith | |
| 2008-05-24 | regen | Brad Smith | |
| 2008-05-24 | Tweak some of the existing ATI IXP entries for more consistent | Brad Smith | |
| naming and add some missing IXP300 entries. | |||
| 2008-05-24 | regen | Brad Smith | |
| 2008-05-24 | There should be spaces between "product" and the vendor name. | Brad Smith | |
| 2008-05-24 | regenerate | Chris Kuethe | |
| 2008-05-24 | USB LCD+keyboard panel | Chris Kuethe | |
| 2008-05-24 | And another Fujitsu Gigabit Etherenet card that is a bge(4) in disguise. | Brad Smith | |
| 2008-05-24 | regen | Brad Smith | |
| 2008-05-24 | Add Fujitsu PW008GE4 | Brad Smith | |
| 2008-05-24 | Also recognize the Schneider & Koch SK-9821/SK-9843 adapters from | Brad Smith | |
| Fujitsu. | |||
| 2008-05-24 | regen | Brad Smith | |
| 2008-05-24 | Add more specific PCI ids for Schneider & Koch (SysKonnect) SK-9821/SK-9843 | Brad Smith | |
| OEM adapters from Fujitsu. | |||
| 2008-05-24 | Store the model and revision information in the appropriate softc | Brad Smith | |
| fields that already exist and reference those fields when necessary instead of reading the registers everytime. ok kettenis@ | |||
| 2008-05-23 | Fix detection of 10baseT on rev 2 and up. | Mark Kettenis | |
| ok brad@ | |||
| 2008-05-23 | Another Fujitsu Gigabit Etherenet card that is a bge(4) in disguise. | Mark Kettenis | |
| 2008-05-23 | regen | Mark Kettenis | |
| 2008-05-23 | Add Fujitsu PW008GE5. | Mark Kettenis | |
| 2008-05-23 | Bye bye awi(4). No net80211 love, uses its own WEP code and has not worked | Brad Smith | |
| properly in 8.5 years so just garbage collect the driver. ok damien@ deraadt@ | |||
| 2008-05-23 | Simplify the combination use of pci_mapreg_type()/pci_mapreg_map() as | Brad Smith | |
| suggested by dlg@ awhile ago. ok dlg@ | |||
| 2008-05-23 | Make rd act more like a 'normal' disk device, allowing the elimination of | Kenneth R Westerback | |
| 'fakerootdev' hackery. This allows us to bring back miod@'s r1.70 subr_disk.c change to avoid the GENERIC dance when rootdev has been initialized. This in turn re-enables raidframe root devices. Add a nice panic if rootdev can't be initialized, displaying the name of the device that didn't work rather than just blowing up by de-referencing NULL. ok deraadt@ | |||
| 2008-05-22 | ANSI function definitions. | Brad Smith | |
| ok dlg@ | |||
 |
index : src | |
| OpenBSD base system |
| summaryrefslogtreecommitdiff |