index
:
src
cvs/HEAD
kms/intel
kms/radeon
master
OpenBSD base system
summary
refs
log
tree
commit
diff
log msg
author
committer
range
path:
root
/
sys
/
dev
Age
Commit message (
Expand
)
Author
2018-05-21
Consistently suffix the pre-processed NVRAM binary that the bwfm(4)'s
Patrick Wildt
2018-05-21
Implement power management Operation Region support.
Mark Kettenis
2018-05-21
Put controllers and child devices in D0 by calling _PS0 when we attach the
Mark Kettenis
2018-05-21
Pass interrupt description along as well.
Mark Kettenis
2018-05-20
Add tipmic(4), a driver for the "Intel" Dollar Cove TI PMIC. This is actually
Mark Kettenis
2018-05-20
Pass the acpi node corresponding to the i2c device down as the cookie.
Mark Kettenis
2018-05-20
Wake up the acpi thread after scheduling a gpio event.
Mark Kettenis
2018-05-19
Fix GenericSerialBus support by parsing ExtendedAccessField correctly.
Mark Kettenis
2018-05-19
Akin to the PCI attachment driver we can extract the chip's dmesg(8)
Patrick Wildt
2018-05-18
regen
Mark Kettenis
2018-05-18
Fix entry for Intel CM238 LPC.
Mark Kettenis
2018-05-18
Revert previous commit; it break reading the RTC on my Cubox-i.
Mark Kettenis
2018-05-18
After reading the first frame, which we can do in two reads (software
Patrick Wildt
2018-05-18
This needs some #ifndef SMALL_KERNEL as well. Fixes RAMDISK_CD.
Mark Kettenis
2018-05-18
Use SCSI_NOSLEEP for management commands issued during attach.
Jonathan Matthew
2018-05-18
Add bio(4) and sensors for mfii(4), based on code from mfi(4). Most of the
Jonathan Matthew
2018-05-18
Make mfii_mgmt() allocate and release a ccb to simplify the most common use
Jonathan Matthew
2018-05-18
Add DPRINTF/DNPRINTF for debug output as in mfi(4) and convert existing
Jonathan Matthew
2018-05-18
Use passthrough IO rather than MFA for management commands.
Jonathan Matthew
2018-05-17
The Broadcom FullMAC firmware has a few ways of doing flow control. One
Patrick Wildt
2018-05-17
Sprinkle some #ifndef SMALL_KERNEL such that RAMDISK kernels cuild again.
Mark Kettenis
2018-05-17
Implement GenericSerialBus OpRegion support.
Mark Kettenis
2018-05-17
Let hvn_iff handle promisc mode activation
Mike Belopuhov
2018-05-17
Implement LoadTable().
Mark Kettenis
2018-05-17
Recent Broadcom chipsets have a dedicated PMU core and it can't be
Patrick Wildt
2018-05-17
Fix iLO/IPMI remote access problem. At least for bge(4) network port
YASUOKA Masahiko
2018-05-17
regen
Mike Larkin
2018-05-17
pci devices found on dell precision 7520
Mike Larkin
2018-05-16
regen
Mark Kettenis
2018-05-16
Add a few Intel C620 PCH entries.
Mark Kettenis
2018-05-16
After having finished transmitting the last mbuf, don't just return to
Patrick Wildt
2018-05-16
Move the code that decodes the i.MX6 PLLs and PFDs into imxanatop(4)
Patrick Wildt
2018-05-16
Add glue for the USB3 controller on the i.MX8MQ SoC.
Patrick Wildt
2018-05-16
Correct order of free(9) in an error case.
Patrick Wildt
2018-05-16
Correct shortcomings in imxiic(4) that occurred during the initial
Patrick Wildt
2018-05-16
Implement a BCDC control packet mechanism based on the command request
Patrick Wildt
2018-05-15
Implement Rx of multiple frames per interrupt in the iwm(4) driver.
Stefan Sperling
2018-05-14
Add support for register shift/io-width to the console code as well.
Mark Kettenis
2018-05-13
Add support for Elantech trackpoints to pms. Extend the list of
Ulf Brosziewski
2018-05-13
Add bus DMA barriers to ensure the hardware does not see a TRB cycle bit
Visa Hankala
2018-05-09
Mark `f_ops' as immutable.
Martin Pieuchot
2018-05-08
Print xHCI revision in dmesg.
Martin Pieuchot
2018-05-07
Add logging options to wsmouse. Input and event logging for debug
Ulf Brosziewski
2018-05-06
Change the order in which whe write ouw own MAC address into the relevant two
Mark Kettenis
2018-05-04
Add a common rules file for ofw sources to help keep the configurations
Visa Hankala
2018-05-03
Set the assigned clock settings in imxesdhc(4), which leads to a frequency
Patrick Wildt
2018-05-03
Add code to initialize the USB 3 PHY on i.MX8MQ.
Patrick Wildt
2018-05-03
Add an API to configure clocks to specific pre-assigned values. These
Patrick Wildt
2018-05-03
use rasops scrollback with radeondrm as well
Jonathan Gray
2018-05-03
Use the default background attribute when erasing rows in doswitch and
Jonathan Gray
[prev]
[next]