summaryrefslogtreecommitdiff
path: root/sys/net80211
AgeCommit message (Collapse)Author
2009-06-06In SIOCS80211SCAN, fail if the interface is not up *and* running.Damien Bergamini
There are cases where the interface can be up but not running, for instance if the driver's if_init routine fails halfway for whatever reason (firmware file not found, hardware switch turned off etc...) This is because in sys/net/if.c, the returned code of the driver is ignored for SIOCSIFFLAGS and the IFF_UP flags is left set. netintro(4) does not say anything about values returned by SIOCSIFFLAGS, so I don't know whether it is the expected behavior or not. pointed out by halex@ and jacekm@ who noticed it was possible to trigger a scan on wpi(4) even when the hardware switch was turned off.
2009-06-03make wireless interfaces priority 4 by default. other interfaces remainBob Beck
priority 0. while we are in here make sure we add wi interfaces to group "wlan" in the same way the net80211 stuff already is. this makes dhcp multiple default routes useful on laptops. ok claudio@
2009-05-24fix prev commit (s/ic_flags/ic_caps/).Damien Bergamini
from dhill@
2009-05-19prevent injection of raw 802.11 control frames through bpf on driversDamien Bergamini
that do not explicitly state this capability (using flag IEEE80211_C_RAWCTL). also, perform all the sanity checks on injected raw 802.11 frames earlier (in ieee80211_output instead of ieee80211_encap). prevent kernel panics with many drivers when running aircrack-ng. when/if all drivers are capable, we can remove this C_RAWCTL flag.
2009-04-16make TKIP TSC start at 1 (instead of 0) to match the standard.Damien Bergamini
many implementations (including ours) will drop frames with a TSC equal to 0 (they are considered replayed frames.)
2009-04-14do not cache the computed TTAK unless MIC has been verified.Damien Bergamini
this prevents an attacker from changing the TTAK (DoS attack) by sending a frame with a large TSC but with a bad ICV and/or MIC. now an attacker can only invalidate the cached TTAK.
2009-03-26move #define IEEE80211_NO_HT under #ifdef SMALL_KERNEL insteadDamien Bergamini
of defining it unconditionnaly. although the HT code is not ready yet, making it compile on GENERIC kernels will help catch regressions/bugs if any.
2009-03-26sync with 802.11w draft 8.0.Damien Bergamini
the SA Query Transaction Identifier field is now a 16-bit non-negative counter value instead of a 128-bit random value.
2009-03-06Fix setting of the Short Slot Time subfield of the Capability InformationDamien Bergamini
field in (Re)Association Requests. This fixes association with APs refusing non-short-slot-time capable STAs. This should also prevent the AP we're associating with to disable the use of short slot time in the BSS as we join. Fix debug message in recv_assoc_resp() while I'm here (s/reason/status/). Scary. Thanks to Adam Emanuel for spotting this.
2009-02-15make "ifconfig if0 chan" list the channels supported by the device.Damien Bergamini
add "ifconfig if0 scan" to scan for access points or to list known stations in Host AP mode. remove the [-]wmm command while i'm here. QoS is mandatory with 802.11n so there's not much point into making it an option. fix parsing of the "powersave" command too. discussed with deraadt@ man page hints from jmc@ display hints from sobrado@ "i like it" cnst@, grange@
2009-02-13Change ifconfig wpaakms default setting to `psk' instead of `psk,802.1x'.Damien Bergamini
Some supplicants will autoselect 802.1X without giving users the possibility to choose between PSK or 802.1X. Similarly, no longer announce `PSK with SHA-256 based KDF' AKMP (defined in Draft 802.11w) by default in the RSN IE of beacons and probe responses as it confuses some broken supplicants. This kind of sacrifies security for interoperability with shitty (but unfortunately widespread) clients that do not follow the 802.11 standard properly. This fixes associations from Intel PROSet on XP and also reportedly fixes some Mac OS clients. I will likely make `psk-sha256' configurable through ifconfig wpaakms after the 4.5 release.
2009-02-08initial 802.11 defragmentation bits.Damien Bergamini
the code will allow the concurrent reception of fragments of three fragmented MSDUs or MMPDUs as required by the 802.11 standard.
2009-01-29fix a panic that occurs when IEEE80211_STA_ONLY is defined (SMALL_KERNEL).Damien Bergamini
noticed by ray@, more investigation from sthen@ fix tested by sthen@
2009-01-28Block Ack agreements are unidirectional.Damien Bergamini
Maintain state for both originator and recipient roles separately. Do not allocate receive reordering buffer in addba_request(). Test the "initiator" bit in incoming DELBA frames and set it appropriately in outgoing DELBA frames. Separate callbacks for Tx/Rx too. no binary change since all this is #ifdef'ed out.
2009-01-28In ieee80211_find_node(), roll our own RB_FIND() based on the key (macaddr)Damien Bergamini
instead of resorting to horrid hacks/casts. Restore the ieee80211_node structure back to its original state.
2009-01-27unbreak SMALL_KERNEL builds by adding missing #ifndef IEEE80211_STA_ONLYDamien Bergamini
pointed out by krw@
2009-01-26move ni_macaddr field at the top of the ieee80211_node structure.Damien Bergamini
this way we can avoid putting a full node structure (which is huge) on the stack in ieee80211_find_node(). this is a bit tricky but the RB_FIND macro wants an "elem" structure, not a field of "elem".
2009-01-26remove ni_ba field from ieee80211_node structure as it is not used yet.Damien Bergamini
this reduces memory footprint and avoids a stack usage warning in ieee80211_find_node() that breaks amd64 build. pointed out by landry@
2009-01-26Add some initial HT bits (not enabled yet) based on 802.11n Draft 7.01:Damien Bergamini
- implement A-MPDU frames buffering and reordering - implement A-MSDU decapsulation - process/send ADDBA Request, ADDBA Response and DELBA action frames - process Block Ack Request control frames (including MTBAR) - implement PBAC support (Protected Block Ack) - add some incomplete HT Capabilities and HT Operation IEs parsing Add more Management Frame Protection bits based on 802.11w Draft 7.0: - implement SA Query procedure (both AP and STA) - cleanup BIP Fix some bugs: - fix check for WEP key length that otherwise caused a stack smash in ieee80211_wep_encrypt (pointed out by Xavier Santolaria on macppc) - properly stop EAPOL timeout: fixes a panic that occured in HostAP mode when turning the interface down while a 4-way handshake is in progress (pointed out by Doughertys) Did some code cleanup too. The HT bits are currently not compiled in (IEEE80211_NO_HT is defined) because they won't be ready until after the next release and I didn't want to grow the kernel or to inadvertently introduce new bugs. They are here such that other people can look at the code. Notice that I had to add an extra parameter to ic_send_mgmt() for action frames, that is why there are small changes in drivers defining their own ic_send_mgmt() handler. Sorry for the not very incremental diff but this has been sitting in my tree for too long now.
2008-12-14txpower range checks should be inclusive.Jonathan Gray
From FreeBSD via mickey in pr 6024. ok damien@
2008-12-14Add an ieee80211_notify_dtim() function that drivers should call afterDamien Bergamini
every DTIM in HostAP mode. Flushes all group addressed MSDUs buffered at the AP for power management.
2008-12-06typo, no binary change.Damien Bergamini
2008-12-03typos in comments - no binary change.Damien Bergamini
2008-12-03small fix for IEEE80211_STA_ONLY: do not let users set HostAP specificDamien Bergamini
flags using "nwflag".
2008-12-02cleanup ieee80211_classify(): retrieve VLAN tag from m_pkthdr.ether_vtag.Damien Bergamini
2008-11-13use different TSCs when sending the two MIC failure report framesDamien Miller
to our AP as we enter TKIP countermeasures by caching the TSC of the last frame to fail the MIC; prompted by and ok damien@
2008-11-13Mitigate the new WPA attack described in Beck, M. and Tews S. "PracticalDamien Miller
attacks against WEP and WPA". The attack works by using the MIC failure notification messages sent station->AP on MIC failure as an oracle to verify guesses to reverse the CRC. To stop this, we can skip sending these notify frames except when we are going into "countermeasures" mode (drop the AP association, do not process traffic for 60s). When we go into countermeasures, I send two MIC failure notifications in a row - this should force the AP into countermeasures too. ok damien@
2008-10-23Prevent a crash in ieee80211_setkeys() when unplugging an interface inMichael Knudsen
hostap mode by canceling the group rekey timeout in ieee80211_node_detach(). ok damien
2008-10-15Second pass of simple timeout_add -> timeout_add_sec conversionsBret Lambert
This should take care of the simpler ones (i.e., timeout values of integer multiples of hz). ok krw@, art@
2008-10-02First step towards cleaning up the Ethernet driver ioctl handling.Brad Smith
Move calling ether_ioctl() from the top of the ioctl function, which at the moment does absolutely nothing, to the default switch case. Thus allowing drivers to define their own ioctl handlers and then falling back on ether_ioctl(). The only functional change this results in at the moment is having all Ethernet drivers returning the proper errno of ENOTTY instead of EINVAL/ENXIO when encountering unknown ioctl's. Shrinks the i386 kernels by.. RAMDISK - 1024 bytes RAMDISKB - 1120 bytes RAMDISKC - 832 bytes Tested by martin@/jsing@/todd@/brad@ Build tested on almost all archs by todd@/brad@ ok jsing@
2008-09-28unbreak the tree.Damien Bergamini
pointed out by deraadt@, Markus Peloquin sorry guys.
2008-09-27Initial implementation of PMKSA caching and pre-authentication.Damien Bergamini
This will be required for future WPA-Enterprise support (802.1X). Add ieee80211_needs_auth() function (not implemented yet) to notify the userland 802.1X PACP machine when an 802.1X port becomes enabled (that is after successfull 802.11 Open System authentication). Add SIOCS80211KEYRUN and SIOCS80211KEYAVAIL ioctls so that the PACP state machine can kick the 802.11 key state machine and install PMKs obtained from 802.1X (pre-)authentication. Enable SHA-256 based AKMPs by default while I'm here (TGw). This uses SHA-256 for key-derivation (instead of SHA1), AES-128-CMAC for data integrity, and AES Key Wrap for data protection of EAPOL-Key frames. An OpenBSD AP will always advertise this capability and an OpenBSD STA will always prefer SHA-256 based AKMPs over SHA1 based ones if both are supported by an AP.
2008-09-27Add some inline functions to test the presence of optional 802.11Damien Bergamini
header fields (Sequence Control, Address 4, QoS Control, +HTC) and use them where appropriate. Add ieee80211_get_qos() inline function to extract the QoS control field of an 802.11 header instead of duplicating the same scary code everywhere (the location of this field depends on the presence of an Address 4 field). Export ieee80211_up_to_ac() so that drivers can select the access category to use based on the TID subfield of the QoS Control field. Define more QoS-related bits for the RSN Capabilities field of RSN IE (will be used later).
2008-09-08define IEEE80211_STA_ONLY if SMALL_KERNEL is defined to shrinkJonathan Gray
the size of install media. ok damien@ deraadt@
2008-09-03third parameter of ieee80211_get_assoc_req() is a management frameDamien Bergamini
subtype, not a boolean indicating assoc or reassoc. rename the parameter and use if (type == IEEE80211_FC0_SUBTYPE_REASSOC_REQ) instead of if (reassoc). it worked only because IEEE80211_FC0_SUBTYPE_ASSOC_REQ is equal to 0.
2008-09-01use C99 style struct initializer instead of GCC specific one (from NetBSD).Damien Bergamini
some whitespace cleanup too.
2008-09-01add ic_tid_noack bitmap to indicate a per-TID ACK policy (1=no ack,Damien Bergamini
0=normal ack). all bits are currently set to 0. use this bitmap to set the ACK policy of the QoS control field of outgoing QoS frames.
2008-09-01extend ieee80211_classify() to extract DSCP field from IPv6 packets too.Damien Bergamini
2008-09-01rework previously unused ieee80211_pwrsave() function, call it fromDamien Bergamini
ieee80211_mgmt_output() and ieee80211_encap(). use new IEEE80211_C_APPMGT capability flag where appropriate. rename ic_tim_mcast to ic_tim_mcast_pending.
2008-08-29move code to support Frequency-Hopping spread spectrum (FHSS) PHYsDamien Bergamini
to the Attic. nothing uses it in the tree and it is very unlikely that something will use it one day. the only driver supporting FHSS PHYs in the tree is ray(4) and it does not use net80211.
2008-08-29garbage collect unused capabilities and configurations flags.Damien Bergamini
add two capabilities flags: IEEE80211_C_HT for HT STAs (802.11n) and IEEE80211_C_APPMGT which indicates the capability for an AP to buffer unicast and multicast traffic for STAs in PS mode. all drivers claiming HostAP support should support that but the truth is that none of them do. most of them are still at the 802.11b-only era and do not update dynamic parts of beacons or process frames from ic_pwrsaveq.
2008-08-28unbreak IEEE80211_DEBUGDamien Bergamini
2008-08-27move definitions of channels attributes away from ieee80211.h suchDamien Bergamini
that ieee80211.h contains only definitions that are part of the 802.11 standard and not constants used internally by net80211. because channels attributes are exported to userland through the radiotap BPF interface, add the definitions to ieee80211_radiotap.h too (which must be kept in sync with what is used in net80211). also, do not export combinations of channel attributes to userland so that noone get stupid ideas.
2008-08-27add IEEE80211_RADIOTAP_F_FCS radiotap flag from NetBSD.Damien Bergamini
use it in drivers that leave the 802.11 FCS in frames passed to radiotap BPF. otherwise, userland has no way to know if FCS is included or not as it depends on drivers. this is required by some ports (aircrack). requested by dhill@
2008-08-27introduce new IEEE80211_STA_ONLY kernel option that can be set toDamien Bergamini
remove IBSS and HostAP support from net80211 and 802.11 drivers. it can be used to shrink RAMDISK kernels for instance (like what was done for wi(4)). it also has the benefit of highlighting what is specific to IBSS and HostAP modes in the code. the cost is that we now have two code paths to maintain.
2008-08-15use LLC_SNAPFRAMELEN here too.Damien Bergamini
2008-08-14ieee80211_derive_pmkid() is not used eitherDamien Bergamini
2008-08-14#ifdef notyet ieee80211_kdf() as it is not used yet (shrink kernel a bit)Damien Bergamini
2008-08-14move the HostAP bridge code and the delivery of data frames to ether_inputDamien Bergamini
to a separate ieee80211_deliver_data() function. this will later be called by the A-MSDU deaggregation routine.
2008-08-14in ieee80211_input(), call if_start() after enqueuing frames in if_sndDamien Bergamini
when acting as an access point instead of having each driver doing the job. tested by krw@ (ral AP) and me with several drivers.