summaryrefslogtreecommitdiff
path: root/sys/netinet6/raw_ip6.c
AgeCommit message (Collapse)Author
2014-12-05Explicitly include <net/if_var.h> instead of pulling it in <net/if.h>.Martin Pieuchot
ok mikeb@, krw@, bluhm@, tedu@
2014-11-09To implement transparent relays for connectionless protocols, theAlexander Bluhm
pf the state has to vanish immediately when the relay closes the socket. To make this work reliably, the linkage between state and socket must be established with the first packet. This packet could be incomming or outgoing. Link the pf state in the socket layer earlier. This makes all tests in /usr/src/regress/sys/net/pf_divert pass. OK henning@
2014-10-14Don't check for an empty list of interfaces. This is never true even ifMartin Pieuchot
you don't have a physical interface on your machine, so why rawip should be more clever^Wparanoid than the others? ok henning@, mikeb@
2014-07-22Fewer <netinet/in_systm.h> !Martin Pieuchot
2014-07-12add a size argument to free. will be used soon, but for now default to 0.Ted Unangst
after discussions with beck deraadt kettenis.
2014-04-18Invert the signature logic of in{,6}_selectsrc, make them return theJeremie Courreges-Anglas
error code and pass the resulting source address back to the caller through a pointer, as suggested by chrisz. This gives us more readable code, and eases the deletion of useless checks in the callers' error path. Add a bunch of "0 -> NULL" conversions, while here. ok chrisz@ mpi@
2014-04-14"struct pkthdr" holds a routing table ID, not a routing domain one.Martin Pieuchot
Avoid the confusion by using an appropriate name for the variable. Note that since routing domain IDs are a subset of the set of routing table IDs, the following idiom is correct: rtableid = rdomain But to get the routing domain ID corresponding to a given routing table ID, you must call rtable_l2(9). claudio@ likes it, ok mikeb@
2014-01-08Name the local variables for struct ifaddr consistently "ifa".Alexander Bluhm
OK mikeb@
2013-12-20Switch inpt_queue from CIRCLEQ to TAILQ. Thus ending use of CIRCLEQKenneth R Westerback
in the base. Ports fixes to follow shortly for the two ports (gkrellm and net-snmp) affected. ok zhuk@ millert@
2013-11-22Remove unused proc argument in in6_control().Martin Pieuchot
ok henning@, mikeb@
2013-10-23Back when some NRL code was merged into KAME to create the *BSD IPV6Theo de Raadt
stack (factoid: by a bunch of people in my living room), some compatibility #define's were created to shim incompatible inpcb access methods. There was an understanding they would eventually be removed. Since they are error prone, and 1999 is a long time ago, now they die. ok mikeb claudio mpi
2013-10-20Put a large chunk of the IPv6 rdomain support in-tree.Peter Hessler
Still some important missing pieces, and this is not yet enabled. OK bluhm@
2013-10-17The header file netinet/in_var.h included netinet6/in6_var.h. ThisAlexander Bluhm
created a bunch of useless dependencies. Remove this implicit inclusion and do an explicit #include <netinet6/in6_var.h> when it is needed. OK mpi@ henning@
2013-06-04Implement pf divert-to and divert-reply also for IPv6 raw sockets.Alexander Bluhm
OK henning@ markus@
2013-06-01Pass the routing domain to IPv6 pr_ctlinput() like in IPv4.Alexander Bluhm
OK claudio@
2013-05-31Remove a bunch of sockaddr_in6 pointer casts and replace othersAlexander Bluhm
with sin6tosa() or satosin6() inline functions. This allows the compiler to check the types more strictly. OK mpi@
2013-05-31The function rip6_ctlinput() claims that sa6_src is constant toAlexander Bluhm
allow the assingment of &sa6_any. But rip6_ctlinput() could not guarantee that as it casted away the const attribute when it passes the pointer to in6_pcbnotify(). Replace sockaddr with const sockaddr_in6 in the in6_pcbnotify() parameters. This reduces the number of casts. Also adjust in6_pcbhashlookup() to handle the const attribute correctly. Input and OK claudio@
2013-05-02tedu broken Resource Reservation Protocol code that was ifdef RSVP_ISI.Martin Pieuchot
ok deraadt@, tedu@ (implicit)
2013-04-07Make the SO_BINDANY socket option also work for raw IPv6 sockets.Alexander Bluhm
OK markus@
2013-04-01There is no IPv6 default scope in OpenBSD. Remove leftovers.Alexander Bluhm
No binary change. OK claudio@
2013-03-31The call to in_pcballoc() in user request attach was handled inAlexander Bluhm
three different ways. Use the same code in udp_usrreq() and rip_usrreq() and rip6_usrreq(). This also fixes a pcb and socket leak in udp_usrreq() in case soreserve() fails. Put an splsoftassert() into in_pcballoc() for safety. OK mpi@
2013-03-30Restrict protocol numbers for raw sockets to the range from 0 to 255.Alexander Bluhm
OK deraadt@ guenther@
2013-03-28no need for a lot of code to include proc.hTed Unangst
2013-03-28Unfortunately the satosin, sintosa, ifatoia, satosin6, sin6tosa,Alexander Bluhm
ifatoia6 macros do not check the source type. They just cast anything. Remove needless casts and do not use those macros if the source type does not match. Remove duplicate defines. No binary change. OK kettenis@ krw@
2013-03-14tedu faith(4), suggested by todd@ some weeks ago after a submission byMartin Pieuchot
dhill. ok krw@, mikeb@, tedu@ (implicit)
2013-03-04Replace the cast to struct in6_ifaddr pointer with the ifatoia6() macro.Alexander Bluhm
No binary change. OK claudio@
2012-10-21Add the IP_DIVERTFL socket option on divert(4) sockets to controlSebastian Benoit
which packets (as in direction) of the traffic will be diverted through the divert socket. ok claudio@, henning@
2011-11-24rdomain support for IPv6sperreault
ok mikeb
2011-05-13Revert the pf->socket linking diff.Owain Ainsworth
at least krw@, pirofti@ and todd@ have been seeing panics (todd and krw with xxxterm not sure about pirofti) involving pool corruption while using this commit. krw and todd confirm that this backout fixes the problem. ok blambert@ krw@, todd@ henning@ and kettenis@ Double link between pf states and sockets. Henning has already implemented half of it. The additional part is: - The pf state lookup for outgoing packets is optimized by using mbuf->inp->state. - For incomming tcp, udp, raw, raw6 packets the socket lookup always is optimized by using mbuf->state->inp. - All protocols establish the link for incomming packets. - All protocols set the inp in the mbuf for outgoing packets. This allows the linkage beginning with the first packet for outgoing connections. - In case of divert states, delete the state when the socket closes. Otherwise new connections could match on old states instead of being diverted to the listen socket. ok henning@
2011-04-24Double link between pf states and sockets. Henning has alreadyAlexander Bluhm
implemented half of it. The additional part is: - The pf state lookup for outgoing packets is optimized by using mbuf->inp->state. - For incomming tcp, udp, raw, raw6 packets the socket lookup always is optimized by using mbuf->state->inp. - All protocols establish the link for incomming packets. - All protocols set the inp in the mbuf for outgoing packets. This allows the linkage beginning with the first packet for outgoing connections. - In case of divert states, delete the state when the socket closes. Otherwise new connections could match on old states instead of being diverted to the listen socket. ok henning@
2011-04-04Add the same SS_CANTRCVMORE check as was done in the other inputClaudio Jeker
functions. OK blambert@
2010-04-20remove proc.h include from uvm_map.h. This has far reaching effects, asTed Unangst
sysctl.h was reliant on this particular include, and many drivers included sysctl.h unnecessarily. remove sysctl.h or add proc.h as needed. ok deraadt
2009-06-05Initial support for routing domains. This allows to bind interfaces toClaudio Jeker
alternate routing table and separate them from other interfaces in distinct routing tables. The same network can now be used in any doamin at the same time without causing conflicts. This diff is mostly mechanical and adds the necessary rdomain checks accross net and netinet. L2 and IPv4 are mostly covered still missing pf and IPv6. input and tested by jsg@, phessler@ and reyk@. "put it in" deraadt@
2008-11-23When accessing cached routes make sure the route is actually still valid.Claudio Jeker
Before accessing a ro_rt make sure the route is either freshly allocated or RTF_UP is set. If not ro_rt should be freed and reallocated or at least no info from the ro_rt should be considered valid. This seems to solve the crashes seen by Felipe Alfaro Solana. some sort of OK dlg@
2008-09-17remove dead stores and newly created unused variables.Charles Longeau
Found by LLVM/Clang Static Analyzer. ok henning@ mpf@
2008-06-11ANSIfy to sync with KAME. From Karl Sjodahl <dunceor@gmail.com>.Ryan Thomas McBride
ok todd deraadt naddy bluhm
2007-12-14add sysctl entry points into various network layers, in particular toTheo de Raadt
provide netstat(1) with data it needs; ok claudio reyk
2007-10-29MALLOC/FREE -> malloc/freeCharles Longeau
ok krw@
2007-06-01apply the "skip ipsec if there are no flows" speedup diff to IPv6 too.Henning Brauer
we need a pointer to the inpcb to decide, which was not previously passed to ip6_output, so this diff is a little bigger. from itojun, ok ryan
2007-02-14Consistently spell FALLTHROUGH to appease lint.Jonathan Gray
ok kettenis@ cloder@ tom@ henning@
2006-12-09switch IPv6 advanced API from RFC2292 to RFC3542 (2292 is superseded by 3542).Jun-ichiro itojun Hagino
the kernel still handles RFC2292 set/getsockopts, so that compiled binary has no trouble running. userland sees RFC3542 symbols only on header file so new code has to use RFC3542 API. bump libc shlib minor for function additions. tested on i386/amd64 by jmc, i386 by brad. checked by deraadt.
2006-05-27Do the same thing as for IPv4. Use a sysctl to enable/disable mfrowardingClaudio Jeker
and additionaly make the code part of the MROUTING option. Put it in deraadt@
2006-03-05Use more queue macros rather than doing it by hand; ok otto@ krw@Miod Vallat
2004-08-23make sure we do not overwrite checksum field on shared mbuf.Jun-ichiro itojun Hagino
markus, henning, deraadt, mcbride ok
2004-06-12support IPV6_USE_MIN_MTU, to make BIND9 better.Jun-ichiro itojun Hagino
(sorry about the mess yesterday)
2004-06-11back out tree breakage. Like, come onTheo de Raadt
2004-06-11support IPV6_USE_MIN_MTU, which is needed to run BIND9 well. from kameJun-ichiro itojun Hagino
markus ok
2004-04-22correct arg to in6_cksum. keiichi@kameJun-ichiro itojun Hagino
2004-01-03put an mi wrapper around stdarg.h/varargs.h. gcc3 moved stdarg/varargs macrosMarc Espie
to built-ins, so eventually we will have one version of these files. Special adjustments for the kernel to cope: machine/stdarg.h -> sys/stdarg.h and machine/ansi.h needs to have a _BSD_VA_LIST_ for syslog* prototypes. okay millert@, drahn@, miod@.
2003-12-21use CIRCLEQ* for pcb's; ok deraadt, henning, mcbride, with help from canacarMarkus Friedl
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-19 08:42:36 +0000