summaryrefslogtreecommitdiff
path: root/sys/netinet6
AgeCommit message (Collapse)Author
2021-07-27Revert "Use per-CPU counters for tunnel descriptor block" diff.mvs
Panic reported by Hrvoje Popovski.
2021-07-26Use per-CPU counters for tunnel descriptor block (tdb) statistics.mvs
'tdb_data' struct became unused and was removed. ok bluhm@
2021-07-26The mbuf header cleanup in revision 1.173 of ip_icmp.c was tooAlexander Bluhm
strict. ICMP error packets generated by pf were not passed immediately, but could be blocked. Preserve PF_TAG_GENERATED flag in icmp_reflect() and icmp6_reflect(). reported by sf@; OK patrick@ kn@
2021-07-08Debug printfs in encdebug were inconsistent, some missing newlinesAlexander Bluhm
produced ugly output. Move the function name and the newline into the DPRINTF macro. This simplifies the debug statements. OK tobhe@
2021-06-03ip6_input_if used the ip6_hdr pointer uninitted after i refactored it.David Gwynne
i did test this, but i guess i was lucky. very lucky. Coverity CID 1505114
2021-06-02don't init a pointer just to immediately set it again.David Gwynne
this is in ip6_input_if just before ipv6_check returns the pointer we end up using. pointed out by bluhm@
2021-06-02factor out the code that does sanity checks on ipv6 headers and addresses.David Gwynne
this will allow these checks to be reused for ip packet inspection in bridge, veb, and tpmr. ok bluhm@ sashan@
2021-05-25As network features are not added dynamically, the domain structuresAlexander Bluhm
are constant. Having more const makes MP review easier. More pointers are mapped read-only in the kernel image. OK deraadt@ mvs@
2021-05-17Stop setting IPV6_MINMTU in ip6_send() which is used by the ICMP code.Claudio Jeker
Because of this large ping packets where fragmented even if the MTU did not indicate the need for it. This causes some trouble when system do not expect to receive a fragmented answer from a system. One such case is the automated link test from google routers before allowing to establish a BGP peering session with them. In general PMTU problems should be an issue from the past and if not it may be better to also break on ping packets and not only for UDP and TCP. ICMP ping is normaly the first tool in the admins toolbox to figure out network issues. OK phessler@ florian@ bluhm@
2021-05-12Use local copy of `ps_rtableid' in ip{,6}_ctloutput() and markmvs
`ps_rtableid' as atomic. This allows us to unlock setrtable(2). ok claudio@ mpi@
2021-04-30Rearrange the implementation of bounded sysctl. The primitiveAlexander Bluhm
functions are sysctl_int() and sysctl_rdint(). This brings us back the 4.4BSD implementation. Then sysctl_int_bounded() builds the magic for range checks on top. sysctl_bounded_arr() is a wrapper around it to support multiple variables. Introduce macros that describe the meaning of the magic boundary values. Use these macros in obvious places. input and OK gnezdo@ mvs@
2021-03-15Clear AUTOCONF6TEMP flag when we detach inet6.Florian Obser
2021-03-10spellingJonathan Gray
ok gnezdo@ semarie@ mpi@
2021-03-08We no longer "accept" RAs in the kernel, delete misleading comment.Florian Obser
2021-03-01Refactor ip_fragment() and ip6_fragment(). Use a mbuf list toAlexander Bluhm
simplify the handling of the fragment list. Now the functions ip_fragment() and ip6_fragment() always consume the mbuf. They free the mbuf and mbuf list in case of an error and take care about the counter. Adjust the code a bit to make v4 and v6 look similar. Fixes a potential mbuf leak when pf_route6() called pf_refragment6() and it failed. Now the mbuf is always freed by ip6_fragment(). OK dlg@ mvs@
2021-02-25we don't have to cast to caddr_t when calling m_copydata anymore.David Gwynne
the first cut of this diff was made with coccinelle using this spatch: @rule@ type caddr_t; expression m, off, len, cp; @@ -m_copydata(m, off, len, (caddr_t)cp) +m_copydata(m, off, len, cp) i had fix it's opinionated idea of formatting by hand though, so i'm not sure it was worth it. ok deraadt@ bluhm@
2021-02-23Use NULL instead of 0 in `m_nextpkt' assignment.mvs
ok deraadt@ dlg@
2021-02-11Swap faddr/laddr and fport/lport arguments in call to stoeplitz_ipXport().Patrick Wildt
Technically the whole point of the stoeplitz API is that it's symmetric, meaning that the order of addresses and ports doesn't matter and will produce the same hash value. Coverity CID 1501717 ok dlg@
2021-02-02As done for the AF_INET multicast case, ensure that passed interfaceClaudio Jeker
via index is actually in the right rdomain for the socket. OK bluhm@ mvs@
2021-02-02KNF, move { up to if () statementClaudio Jeker
2021-02-01Fix path MTU discovery for ESP tunneled in IPv6. We always wantAlexander Bluhm
short TCP segments or fragments encapsulated in ESP instead of fragmented ESP packets. Pass the don't fragment flag down along the stack so that dynamic routes with MTU are created eventually. with and OK markus@; OK tobhe@
2021-02-01Fix white spaces and wrap long lines.Alexander Bluhm
2021-01-25if stoeplitz is enabled, use it to provide a flowid for tcp packets.David Gwynne
drivers that implement rss and multiple rings depend on the symmetric toeplitz code, and use it to generate a key that decides with rx ring a packet lands on. if the toeplitz code is enabled, this diff has the pcb and tcp layer use the toeplitz code to generate a flowid for packets they send, which in turn is used to pick a tx ring. because the nic and the stack use the same key, the tx and rx sides end up with the same hash/flowid. at the very least this means that the same rx and tx queue pair on a particular nic are used for both sides of the connection. as the stack becomes more parallel, it will also help keep both sides of the tcp connection processing in the one place.
2021-01-11Create a path MTU host route for IPsec over IPv6. Basically theAlexander Bluhm
code is copied from IPv4 and adapted. Some things are changed in v4 to make it look similar. - ip6_forward increases the noroute error counter, do that in ip_forward, too. - Pass more specific sockaddr_in6 to icmp6_mtudisc_clone(). - IPv6 may also use reject routes for IPsec PMTU clones. - To pass a route_in6 to ip6_output_ipsec_send() introduce one in ip6_forward(). That is the same what IPv4 does. Note that dst and sin6 switch roles. - Copy comments from ip_output_ipsec_send() to ip6_output_ipsec_send() to make code similar. - Implement dynamic IPv6 IPsec PMTU routes. OK tobhe@
2021-01-06Mark a layer 2 address as expired by setting the length to 0 when theFlorian Obser
associated IPv6 NDP entry is invalidated. Otherwise we end up with an INCOMPLETE entry that can't be updated to STALE and REACHABLE by neighbor advertisements and thus interrupting communication. This is the same as arpinvalidate() for IPv4. Guidance bluhm & claudio, fix proposed by claudio OK claudio
2020-12-22For a while the kerrnel reports EACCES to userland if pf blocks aAlexander Bluhm
packet. IPv6 still had the old EHOSTUNREACH code. Use the same errno for dropped IPv6 packets as in IPv4. OK kn@ phessler@ claudio@ florian@ sashan@
2020-11-26fix typo in log message: inteface -> interfaceTheo Buehler
ok florian
2020-11-16Replace sysctl_rdint with sysctl_bounded_args entries in net.inet*gnezdo
2020-11-16Remove the cases folded into sysctl_bounded_args but left behindgnezdo
divert_sysctl and divert6_sysctl get a tiny bit slimmer.
2020-11-07Rework source IP address setting.denis
- Move most of the processing out of rtable.c (reasonnable tb@, ok bluhm@) - Remove memory allocation, store pointer to existing ifaddr - Fix tunnel interface handling looks fine mpi@
2020-11-05Replace wrong cast with satosin.denis
Advised by bluhm@
2020-10-29Add feature to force the selection of source IP addressdenis
Based/previous work on an idea from deraadt@ Input from claudio@, djm@, deraadt@, sthen@ OK deraadt@
2020-10-28When generating the ICMP6 response to an IPv6 packet, the kernelAlexander Bluhm
could use mbuf memory after freeing it. If m_pullup() allocates a new mbuf, the caller uses the old pointer. found and reported by Maxime Villard, thanks OK claudio@ markus@ denis@
2020-09-01Convert icmp6_sysct to sysctl_bounded_argsgnezdo
The best-guessed limits will be tested by trial.
2020-08-24Convert ip6_sysctl to sysctl_bounded_argsgnezdo
Tighter limits and OK by sashan
2020-08-24Convert divert*_sysctl to sysctl_bounded_argsgnezdo
OK sashan
2020-08-08No longer prevent TCP connections to IPv6 anycast addresses.Florian Obser
RFC 4291 dropped this requirement from RFC 3513: o An anycast address must not be used as the source address of an IPv6 packet. And from that requirement draft-itojun-ipv6-tcp-to-anycast rightly concluded that TCP connections must be prevented. The draft also states: The proposed method MUST be removed when one of the following events happens in the future: o Restriction imposed on IPv6 anycast address is loosened, so that anycast address can be placed into source address field of the IPv6 header[...] OK jca
2020-08-07The IPv6 source address selection rewrite had one (known) differenceFlorian Obser
to the previous behavior: In case of a tie the new implementation would keep the current best address while the old implementation replaced the best address. Since IPv6 addresses are stored in a TAILQ this meant that the rewrite would use the "oldest" address while the previous behavior was to use the "newest". RFC 6724 section 5 has no opinion which one is better and leaves the tie break up to implementers. naddy found out the hard way that this breaks his IPv6 connectivity in case of flash renumbering events when the link on his cpe flaps and a new prefix is used since we would always pick an old address. While we could pick the newest address in a tie break this feels too much like an implementation detail, a solution much more in the spirit of IPv6 is to pick the address with the highest preferred lifetime (or valid lifetime in case of another tie). very patient testing naddy@
2020-08-04Validate input given to ioctl(SIOCAIFADDR_IN6) like NetBSD already does.anton
Fixes a bunch of panics reported by syzkaller. ok florian@ Reported-by: syzbot+02f2e07964a89ab65ea4@syzkaller.appspotmail.com Reported-by: syzbot+c26b058a499ce38f689f@syzkaller.appspotmail.com Reported-by: syzbot+62af76d8cb7c09ac017c@syzkaller.appspotmail.com Reported-by: syzbot+d70144b3ae2ec068e318@syzkaller.appspotmail.com Reported-by: syzbot+3c87ca9873bfd0492f5c@syzkaller.appspotmail.com Reported-by: syzbot+323549177062adb80f84@syzkaller.appspotmail.com Reported-by: syzbot+e745c1c29d960337ce14@syzkaller.appspotmail.com Reported-by: syzbot+91da988a445013baf925@syzkaller.appspotmail.com Reported-by: syzbot+747cbcbbed6318542061@syzkaller.appspotmail.com Reported-by: syzbot+ca5efa23e00130bc8000@syzkaller.appspotmail.com Reported-by: syzbot+731ab8c9a0342ace4189@syzkaller.appspotmail.com Reported-by: syzbot+6c80b815a0ff8f09be69@syzkaller.appspotmail.com Reported-by: syzbot+7939d2c4bc9a5dfa707a@syzkaller.appspotmail.com Reported-by: syzbot+e893fb0259640a314d06@syzkaller.appspotmail.com Reported-by: syzbot+b6a3447070ae8ffcb125@syzkaller.appspotmail.com Reported-by: syzbot+23c0824b688f28c79c1b@syzkaller.appspotmail.com Reported-by: syzbot+6cc72412d8ddcf87f8a1@syzkaller.appspotmail.com
2020-08-02Add missing rtable(4) check in rip6_input()kn
Copied over from sys/netinet/raw_ip.c:rip_input() where it appeared with initial support for multiple routing tables. This enforces separation between multiple raw sockets in different routing tables, i.e. one must not see packets from the other if the rtable differs. Observed with ping6(8)'s "-v" showing all ICMPv6 packets on its raw socket including those produced by another ping6 with "-V1". florian reported IPv6 route advertisments in one routing table appearing on raw sockets in other routing tables as well. OK claudio florian
2020-08-01Move range check inside sysctl_int_arrgnezdo
Range violations are now consistently reported as EOPNOTSUPP. Previously they were mixed with ENOPROTOOPT. OK kn@
2020-07-28Rewrite IPv6 source address selection in terms of the 8 rules given inFlorian Obser
RFC 6724 section 5. This simplifies the code considerably while extensive testing shows no change in behaviour. It is time to volunteer some more testers. OK denis@ some time ago.
2020-07-17Copy the right value to fix getsockopt(2) for SO_RTABLE and IPV6_PIPEXkn
r1.146 "Enable IPv6 routing domain support" adapted the mtod() line from the IPV6_PIPEX case which was bogus since introduction in r1.118. Issue found by florian, who came up with the same partial diff for SO_RTABLE while working on rdomain aware slaacd(8). Taken from sys/netinet/ip_output.c which does it correctly. OK florian millert
2020-07-03Rename IN6_IFF_PRIVACY to IN6_IFF_TEMPORARY.Florian Obser
This is the name the other BSDs use for this, there is no reason to be different, the IPv6 RFCs call these addresses temporary, and some software in ports wants to use this as well. Most recently pointed out for firefox by landry. OK claudio, sthen
2020-06-30Fix two places where carp backup state is misspelled in comments.Sebastian Benoit
ok claudio@
2020-06-24kernel: use gettime(9)/getuptime(9) in lieu of time_second(9)/time_uptime(9)cheloha
time_second(9) and time_uptime(9) are widely used in the kernel to quickly get the system UTC or system uptime as a time_t. However, time_t is 64-bit everywhere, so it is not generally safe to use them on 32-bit platforms: you have a split-read problem if your hardware cannot perform atomic 64-bit reads. This patch replaces time_second(9) with gettime(9), a safer successor interface, throughout the kernel. Similarly, time_uptime(9) is replaced with getuptime(9). There is a performance cost on 32-bit platforms in exchange for eliminating the split-read problem: instead of two register reads you now have a lockless read loop to pull the values from the timehands. This is really not *too* bad in the grand scheme of things, but compared to what we were doing before it is several times slower. There is no performance cost on 64-bit (__LP64__) platforms. With input from visa@, dlg@, and tedu@. Several bugs squashed by visa@. ok kettenis@
2020-06-22Don't pass a pointer to an uninitialized variable as plenp toKenneth R Westerback
ip6_hopopts(). The value is tested and non-zero values could cause a packet to be discarded. Initialize the pointed at variable to 0, tweaking variable names and associated comments. COVERITY 1453098 ok deraadt@ mpi@
2020-06-21wireguard can do ipv6, but doesnt do link local addresses.David Gwynne
i feel like i should add IFT_L3IPVLAN here so mgre(4) can take advantage of this too. from Matt Dunwoodie and Jason A. Donenfeld ok deraadt@
2020-05-27Document the various flavors of NET_LOCK() and rename the reader version.Martin Pieuchot
Since our last concurrency mistake only ioctl(2) ans sysctl(2) code path take the reader lock. This is mostly for documentation purpose as long as the softnet thread is converted back to use a read lock. dlg@ said that comments should be good enough. ok sashan@
2020-05-06Do sanity checks in ip6_pullexthdr() preventing a panic in m_copydata(9).Martin Pieuchot
An invalid/corrupted hop6 option in rip6_input()/ip6_savecontrol() could lead m_copydata(9)s' check to trigger a panic. Fix from maxv@NetBSD where the problem was also reported by syzkaller. Reported-by: syzbot+3b07b3511b4ceb8bf1e2@syzkaller.appspotmail.com Reported-by: syzbot+7ee0eb2691d507fcad2e@syzkaller.appspotmail.com ok sashan@, dlg@, claudio@, deraadt@
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 16:59:08 +0000