src - OpenBSD base system

Age	Commit message (Expand)	Author
2006-05-21	replace lockmgr with rwlock.	David Gwynne
2006-05-09	make sensor names look more normal; ok dlg	Theo de Raadt
2006-01-19	Replace SENSOR_ADD() macro with a pair of functions	Alexander Yurchenko
2006-01-11	dont print anything if we're unable to read the status page	David Gwynne
2005-12-02	Missing 'break;'. Spotted by lint.	Kenneth R Westerback
2005-11-19	Remove unnecessary lockmgr() archaism that was costing too much in terms	Pedro Martelletto
2005-11-13	lock updates to the buffer with the enclosure status in it so that one	David Gwynne
2005-11-12	there are two things that safte does: update sensors and blink lights. if	David Gwynne
2005-11-11	include sys/device.h. builds on sparc. dlg@ ok.	Federico G. Schwindt
2005-11-10	remove half the includes since they seem to be unnecessary.	David Gwynne
2005-11-10	i am a stupid head. unbreak kernels that done have the bio(4) device.	David Gwynne
2005-11-10	cut safte over to using the generic sensors kthread.	David Gwynne
2005-08-24	dont reject safte devices that have more inquiry information than the	David Gwynne
2005-08-23	Test for cold and apply relevant flags for all scsi commands.	Marco Peereboom
2005-08-22	check for scsi_autoconf state, spotted by marco; ok krw	Theo de Raadt
2005-08-21	handle the unblink request; ok dlg marco krw	Theo de Raadt
2005-08-18	das blinkenlighten! uses /dev/bio to allow an ioctl to turn identify on	David Gwynne
2005-08-17	dont increment the offset both in and out of the loop while reading the	David Gwynne
2005-08-15	free the right buffer on error	David Gwynne
2005-08-13	let safte match on dell enclosures too. ses takes precedence though	David Gwynne
2005-08-12	rewrite the reading of the status page, which in turn adds support for	David Gwynne
2005-08-10	use the appropriate flags to scsi_scsi_cmd during autoconf so we dont spin	David Gwynne
2005-08-08	Fill in device structure, bad dlg@	Marco Peereboom
2005-08-05	dont do an inquiry in attach just to print the safte revision number. it	David Gwynne
2005-08-05	switch safte from using a scsi cmd at softclock to doing the commands	David Gwynne
2005-08-05	READ BUFFER is a generic opcode, so dont define our own	David Gwynne
2005-08-05	shorten dmesg output	Theo de Raadt
2005-08-05	make the naming of the safte files consisten with the rest of the scsi	David Gwynne