summaryrefslogtreecommitdiff
path: root/sys/scsi/ses.c
AgeCommit message (Expand)Author
2006-01-11dont print anything if we're unable to read the status pageDavid Gwynne
2005-11-19Remove unnecessary lockmgr() archaism that was costing too much in termsPedro Martelletto
2005-11-13lock accesses to the buffer so that it wont get confused between theDavid Gwynne
2005-11-13if the particular ses device has no slots or sensors to handle, then freeDavid Gwynne
2005-11-12clean up unused includesDavid Gwynne
2005-11-12remove the ses kthread goop and use the sensor kthread for updates insteadDavid Gwynne
2005-09-29fix the check for the type of enclosureDavid Gwynne
2005-08-23setting the FAULT flag on a device so the alarm led blinks may haveDavid Gwynne
2005-08-23Test for cold and apply relevant flags for all scsi commands.Marco Peereboom
2005-08-22check for scsi_autoconf state, spotted by marco; ok krwTheo de Raadt
2005-08-18Silly dlg did not read my old code careful enough. Missed 2 bits that areMarco Peereboom
2005-08-18infrastructure to support blinking controlled via /dev/bio ioctls. theDavid Gwynne
2005-08-13let safte match on dell enclosures too. ses takes precedence thoughDavid Gwynne
2005-08-10use the appropriate flags to scsi_scsi_cmd during autoconf so we dont spinDavid Gwynne
2005-08-09normalise the fan speed outputDavid Gwynne
2005-08-08Fill in device structure, bad dlg@Marco Peereboom
2005-08-05report the fan speed as a percentage since it seems all the enclosures weDavid Gwynne
2005-08-05reorder the allocation of bits in attach to make cleaning up on an errorDavid Gwynne
2005-08-04the generic scsi attach line already says we're an enclosure, so why didDavid Gwynne
2005-08-04be nicer to the controller the ses device is attached to by doing the scsiDavid Gwynne
2005-08-04Add support for dell enclosures that do both SES and SAF-TE. ok dlg@Marco Peereboom
2005-08-03report the state of the power supplies. the value shows if the psu is onDavid Gwynne
2005-08-03take advantage of the new ability of the sensors framework to report theDavid Gwynne
2005-08-02read the rpm of the fansDavid Gwynne
2005-08-01a new scsi enclosure services driver. this and safte replace the old sesDavid Gwynne
2005-07-31remove the ses driver. it has never been enabled in GENERIC on any archDavid Gwynne
2004-05-09Add missing <cr>'s to various SC_DEBUG() calls, along with a few otherKenneth R Westerback
2004-01-03put an mi wrapper around stdarg.h/varargs.h. gcc3 moved stdarg/varargs macrosMarc Espie
2003-08-06Remove some double semicolons (hmm, do two semis equal a maxi?).Todd C. Miller
2002-03-15Kill #if __STDC__ used to do K&R vs. ANSI varargs/stdarg; just do thingsTodd C. Miller
2002-03-14First round of __P removal in sysTodd C. Miller
2001-06-22KNFTheo de Raadt
2000-02-21add SES/SAF-TE SCSI devicemjacob
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-14 01:17:15 +0000