src - OpenBSD base system

Age	Commit message (Expand)	Author
2005-11-13	Allow removable disks to be spun up if they ask for initialization	Kenneth R Westerback
2005-11-13	ATAPI Tape drives need 6 byte MODE SENSE commands according to at	Kenneth R Westerback
2005-11-13	Use SCSI_DELAY only once. Document it. Default to no delay.	Kenneth R Westerback
2005-11-13	Use scsi_delay() instead of delay() when waiting for scsi disk to	Kenneth R Westerback
2005-11-13	lock accesses to the buffer so that it wont get confused between the	David Gwynne
2005-11-13	lock updates to the buffer with the enclosure status in it so that one	David Gwynne
2005-11-13	if the particular ses device has no slots or sensors to handle, then free	David Gwynne
2005-11-12	there are two things that safte does: update sensors and blink lights. if	David Gwynne
2005-11-12	clean up unused includes	David Gwynne
2005-11-12	remove the ses kthread goop and use the sensor kthread for updates instead	David Gwynne
2005-11-11	include sys/device.h. builds on sparc. dlg@ ok.	Federico G. Schwindt
2005-11-10	remove half the includes since they seem to be unnecessary.	David Gwynne
2005-11-10	i am a stupid head. unbreak kernels that done have the bio(4) device.	David Gwynne
2005-11-10	cut safte over to using the generic sensors kthread.	David Gwynne
2005-11-07	Death to superfluous verbiage. Suppress errors when getting the parameters	Kenneth R Westerback
2005-11-02	Abstract delay code out and call it directly from XX_interpret_sense.	Kenneth R Westerback
2005-10-22	When a scsi command is waiting for an opening or is waiting to be retried,	Kenneth R Westerback
2005-10-16	Don't pound UNIT ATTENTION retries in as fast as possible. If we are	Kenneth R Westerback
2005-10-15	Eliminate unnecessary bzero() by only writing valid information.	Kenneth R Westerback
2005-10-14	Eliminate uneeded variable 'i' and use under utilized 'data_track'	Kenneth R Westerback
2005-10-11	use [bl]etohXX instead of ntoh[sl], makes the code more consistent and	Hans-Joerg Hoexer
2005-10-11	Change some byte shifting to _4btol() and swap32() calls.	Kenneth R Westerback
2005-10-10	Some KNF. malloc/free instead of MALLOC/FREE since it's a variable	Kenneth R Westerback
2005-10-10	Make some panic messages more useful.	Kenneth R Westerback
2005-10-04	shorter name for wait channel	Theo de Raadt
2005-09-29	fix the check for the type of enclosure	David Gwynne
2005-09-29	Clear SDEV_MEDIA_LOADED for cd media on the last close of a device, as	Kenneth R Westerback
2005-09-26	Use SCSI_IGNORE_ILLEGAL_REQUEST when reading a cd's table of contents.	Kenneth R Westerback
2005-09-21	Improve readability by using a variable instead of repeated	Kenneth R Westerback
2005-09-21	Missing parenthesis. Same problem was addressed in sd.c r1.90. Could	Kenneth R Westerback
2005-09-19	Use variable to eliminate repeated calculation. More readable. No	Kenneth R Westerback
2005-09-15	Don't fake MODE SENSE page 4 info inside raid drivers, just let sd	Kenneth R Westerback
2005-09-11	Simplify code by changing struct scsi_mode_sense_buf{ union {}	Kenneth R Westerback
2005-09-11	Some UMASS devices blow up if MODE SENSE buffer length is 0 (aka 256).	Kenneth R Westerback
2005-09-08	free(NULL, ...) is not safe in the kernel. So check for NULL'ness	Kenneth R Westerback
2005-08-29	If a buffer larger than the max allowed is offered to scsi_mode_sense()	Kenneth R Westerback
2005-08-29	Make sure certain architectures/compilers don't round up the size of	Kenneth R Westerback
2005-08-27	Put in missing parenthesis and thus always pass	Kenneth R Westerback
2005-08-24	dont reject safte devices that have more inquiry information than the	David Gwynne
2005-08-24	Test xs->bp before de-referencing it. Initialize it to NULL, not 0.	Kenneth R Westerback
2005-08-23	setting the FAULT flag on a device so the alarm led blinks may have	David Gwynne
2005-08-23	Move uses of struct scsi_mode_sense_buf (255 bytes each) from the	Kenneth R Westerback
2005-08-23	Spin up sd units even if TEST_UNIT_READY says they're ready.	Kenneth R Westerback
2005-08-23	Test for cold and apply relevant flags for all scsi commands.	Marco Peereboom
2005-08-22	check for scsi_autoconf state, spotted by marco; ok krw	Theo de Raadt
2005-08-22	spell: failture->failure	David Krause
2005-08-21	handle the unblink request; ok dlg marco krw	Theo de Raadt
2005-08-21	Some devices go berserk when asked for mode sense pages they don't	Kenneth R Westerback
2005-08-18	Only allow blocksizes that are powers of 2 between 512 and 64K. An sd	Kenneth R Westerback
2005-08-18	Silly dlg did not read my old code careful enough. Missed 2 bits that are	Marco Peereboom