summaryrefslogtreecommitdiff
path: root/sys/scsi
AgeCommit message (Expand)Author
2005-12-02Remove one tab that cause a line to overflow. No functional change.Marco Peereboom
2005-12-02Missing 'break;'. Spotted by lint.Kenneth R Westerback
2005-11-28fix month-old breakage found by genududes (after henning's breakage)Michael Shalayeff
2005-11-19Remove unnecessary lockmgr() archaism that was costing too much in termsPedro Martelletto
2005-11-17Don't forget to device_unref() in sdclose() if sdlock() fails; ok krw@Miod Vallat
2005-11-17Use sectors as the size units for the RAW_PART (i.e. 'c') partition inKenneth R Westerback
2005-11-13Allow removable disks to be spun up if they ask for initializationKenneth R Westerback
2005-11-13ATAPI Tape drives need 6 byte MODE SENSE commands according to atKenneth R Westerback
2005-11-13Use SCSI_DELAY only once. Document it. Default to no delay.Kenneth R Westerback
2005-11-13Use scsi_delay() instead of delay() when waiting for scsi disk toKenneth R Westerback
2005-11-13lock accesses to the buffer so that it wont get confused between theDavid Gwynne
2005-11-13lock updates to the buffer with the enclosure status in it so that oneDavid Gwynne
2005-11-13if the particular ses device has no slots or sensors to handle, then freeDavid Gwynne
2005-11-12there are two things that safte does: update sensors and blink lights. ifDavid Gwynne
2005-11-12clean up unused includesDavid Gwynne
2005-11-12remove the ses kthread goop and use the sensor kthread for updates insteadDavid Gwynne
2005-11-11include sys/device.h. builds on sparc. dlg@ ok.Federico G. Schwindt
2005-11-10remove half the includes since they seem to be unnecessary.David Gwynne
2005-11-10i am a stupid head. unbreak kernels that done have the bio(4) device.David Gwynne
2005-11-10cut safte over to using the generic sensors kthread.David Gwynne
2005-11-07Death to superfluous verbiage. Suppress errors when getting the parametersKenneth R Westerback
2005-11-02Abstract delay code out and call it directly from XX_interpret_sense.Kenneth R Westerback
2005-10-22When a scsi command is waiting for an opening or is waiting to be retried,Kenneth R Westerback
2005-10-16Don't pound UNIT ATTENTION retries in as fast as possible. If we areKenneth R Westerback
2005-10-15Eliminate unnecessary bzero() by only writing valid information.Kenneth R Westerback
2005-10-14Eliminate uneeded variable 'i' and use under utilized 'data_track'Kenneth R Westerback
2005-10-11use [bl]etohXX instead of ntoh[sl], makes the code more consistent andHans-Joerg Hoexer
2005-10-11Change some byte shifting to _4btol() and swap32() calls.Kenneth R Westerback
2005-10-10Some KNF. malloc/free instead of MALLOC/FREE since it's a variableKenneth R Westerback
2005-10-10Make some panic messages more useful.Kenneth R Westerback
2005-10-04shorter name for wait channelTheo de Raadt
2005-09-29fix the check for the type of enclosureDavid Gwynne
2005-09-29Clear SDEV_MEDIA_LOADED for cd media on the last close of a device, asKenneth R Westerback
2005-09-26Use SCSI_IGNORE_ILLEGAL_REQUEST when reading a cd's table of contents.Kenneth R Westerback
2005-09-21Improve readability by using a variable instead of repeatedKenneth R Westerback
2005-09-21Missing parenthesis. Same problem was addressed in sd.c r1.90. CouldKenneth R Westerback
2005-09-19Use variable to eliminate repeated calculation. More readable. NoKenneth R Westerback
2005-09-15Don't fake MODE SENSE page 4 info inside raid drivers, just let sdKenneth R Westerback
2005-09-11Simplify code by changing struct scsi_mode_sense_buf{ union {}Kenneth R Westerback
2005-09-11Some UMASS devices blow up if MODE SENSE buffer length is 0 (aka 256).Kenneth R Westerback
2005-09-08free(NULL, ...) is not safe in the kernel. So check for NULL'nessKenneth R Westerback
2005-08-29If a buffer larger than the max allowed is offered to scsi_mode_sense()Kenneth R Westerback
2005-08-29Make sure certain architectures/compilers don't round up the size ofKenneth R Westerback
2005-08-27Put in missing parenthesis and thus always passKenneth R Westerback
2005-08-24dont reject safte devices that have more inquiry information than theDavid Gwynne
2005-08-24Test xs->bp before de-referencing it. Initialize it to NULL, not 0.Kenneth R Westerback
2005-08-23setting the FAULT flag on a device so the alarm led blinks may haveDavid Gwynne
2005-08-23Move uses of struct scsi_mode_sense_buf (255 bytes each) from theKenneth R Westerback
2005-08-23Spin up sd units even if TEST_UNIT_READY says they're ready.Kenneth R Westerback
2005-08-23Test for cold and apply relevant flags for all scsi commands.Marco Peereboom
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 00:49:50 +0000