summaryrefslogtreecommitdiff
path: root/sys
AgeCommit message (Expand)Author
2006-11-25Don't handle acpiev events inside the gpe handler since this causes deadlocks.Marco Peereboom
2006-11-25Fixed acpiec code for deadlockJordan Hargrave
2006-11-25add commented out entries for gem@sbusBrad Smith
2006-11-25initial stab at an SBus front end for gem(4). currently untested.Brad Smith
2006-11-25Initial NAND flash support for Zaurus, not enabled yet; prodded by many.Uwe Stuehler
2006-11-25Cleanup obsolete rate bits and pass right value to the TX rate descriptor.Marcus Glocker
2006-11-25If no TX rate has been calculated yet, set rate value to autoselectMarcus Glocker
2006-11-25fix use of gem_bitwait().Brad Smith
2006-11-25Split the GEM registers into two halfs and provide a bus_space_handle_tBrad Smith
2006-11-25additional registers and some comment fixes.Brad Smith
2006-11-25Fix a copy and pasto.Brad Smith
2006-11-24Small KNF fix.Marcus Glocker
2006-11-24Enable setting of fixed rates.Marcus Glocker
2006-11-24Check the reference count for interface addresses when detachingCan Erkin Acar
2006-11-24Enable automatic rate adapation (done by firmware and hardware).Marcus Glocker
2006-11-24From Jon Simola <jsimola@gmail.com>:Marcus Glocker
2006-11-24regenBrad Smith
2006-11-24add the Broadcom BCM5709 PCI id.Brad Smith
2006-11-24When copying out struct statfs to userland, we need to zero out the fsidArtur Grabowski
2006-11-24add support to tag ipsec traffic belonging to specific IKE-initiatedReyk Floeter
2006-11-24never call an ioctl without process context! this diffs checks theReyk Floeter
2006-11-24replace a magic number (reserved TX descs?) with macroBrad Smith
2006-11-24regenBrad Smith
2006-11-24add the DLink DWL-G120 product id.Brad Smith
2006-11-23Remove 802.11a stuff. There is one RF chip (88W8030) which supports 5GHz,Marcus Glocker
2006-11-23Do not attach second port on dual port cards for now.Mark Kettenis
2006-11-23Set some more power management bits; makes Yukon-2 XL work somewhat.Mark Kettenis
2006-11-23The duration field is calculated by the firmware. Remove malo_txtime()Marcus Glocker
2006-11-23OpenBSD-ify the HW VLAN tag insertion code.Brad Smith
2006-11-22add the BCM4312 PCI id.Brad Smith
2006-11-22Be more generous with interrupt disabling in the scheduler.Miod Vallat
2006-11-22The softintr lock needs to be an __mp_lock, not a __cpu_simple_lock.Miod Vallat
2006-11-22style(9): remove variables names from prototypes.Damien Bergamini
2006-11-22Remove rssadapt(9) bits; Firmware supports rate adaption. Also,Marcus Glocker
2006-11-22don't write to BBP before it is ready and fully initializedDamien Bergamini
2006-11-22If M_CANFAIL is set and the malloc() size is to bigThordur I. Bjornsson
2006-11-22Some more minor cleanup in the PCI hookup.Marcus Glocker
2006-11-22From Jon Simola <jon@mecha.ca>:Marcus Glocker
2006-11-21Fail wi_get_txpower() on USB wi(4), so that we don't CSR_READ on them.Miod Vallat
2006-11-21Free allocated mbufs at TX done. While there also reset some TX descriptorMarcus Glocker
2006-11-21fix dmesg printing for the artisea chipset.Brad Smith
2006-11-21Define IPL_SCHED.Miod Vallat
2006-11-21splassert support.Miod Vallat
2006-11-21Don't bother using _cpu_intr_raise() for splhigh(), use _cpu_intr_suspend().Miod Vallat
2006-11-21Use _cpu_intr_resume() instead of splx() for consistency. No functional change.Miod Vallat
2006-11-21From Jon Simola <simola@mecha.com>:Marcus Glocker
2006-11-21introduce sysctl net.inet6.ip6.multicast_mtudisc (for multicast routers).Jun-ichiro itojun Hagino
2006-11-21Remove watchdog handler workaround introduced in rev 1.149 which is noBrad Smith
2006-11-21style changes. no op.Brad Smith
2006-11-20Re-enable HW VLAN tagging.Brad Smith