Age | Commit message (Expand) | Author |
2006-11-25 | Convert pwdog(4) over to using pci_matchbyid(). | Marc Balmer |
2006-11-25 | remove a comment that only applies to freebsd. | Damien Bergamini |
2006-11-25 | enable new devices (flash, usbf, cdcef) | Uwe Stuehler |
2006-11-25 | Add mutex. | Marco Peereboom |
2006-11-25 | Initial USB device controller (UDC) and USB CDC Ethernet function support | Uwe Stuehler |
2006-11-25 | The PWDOG1 card can be jumpered to work I/O or memory mapped. Detect | Marc Balmer |
2006-11-25 | Remove unneeded branch, no need to check if opts is != NULL just set it to | Claudio Jeker |
2006-11-25 | malo works fine here, enable it. | Jonathan Gray |
2006-11-25 | ANSI | Brad Smith |
2006-11-25 | regen | Jonathan Gray |
2006-11-25 | Netgear WG111v2 | Jonathan Gray |
2006-11-25 | committ these atfter generating them, reminded by deraadt. | Marc Balmer |
2006-11-25 | remove a comment which is now untrue after i fixed it | David Gwynne |
2006-11-25 | Add support for the Quancom PWDOG1 watchdog timer card. | Marc Balmer |
2006-11-25 | sync amd64 to i386 w.r.t. acpi support. Also fix interrupt routing for multi-... | Niklas Hallqvist |
2006-11-25 | remove some sk(4) specific media handling code. | Brad Smith |
2006-11-25 | Don't handle acpiev events inside the gpe handler since this causes deadlocks. | Marco Peereboom |
2006-11-25 | Fixed acpiec code for deadlock | Jordan Hargrave |
2006-11-25 | add commented out entries for gem@sbus | Brad Smith |
2006-11-25 | initial stab at an SBus front end for gem(4). currently untested. | Brad Smith |
2006-11-25 | Initial NAND flash support for Zaurus, not enabled yet; prodded by many. | Uwe Stuehler |
2006-11-25 | Cleanup obsolete rate bits and pass right value to the TX rate descriptor. | Marcus Glocker |
2006-11-25 | If no TX rate has been calculated yet, set rate value to autoselect | Marcus Glocker |
2006-11-25 | fix use of gem_bitwait(). | Brad Smith |
2006-11-25 | Split the GEM registers into two halfs and provide a bus_space_handle_t | Brad Smith |
2006-11-25 | additional registers and some comment fixes. | Brad Smith |
2006-11-25 | Fix a copy and pasto. | Brad Smith |
2006-11-24 | Small KNF fix. | Marcus Glocker |
2006-11-24 | Enable setting of fixed rates. | Marcus Glocker |
2006-11-24 | Check the reference count for interface addresses when detaching | Can Erkin Acar |
2006-11-24 | Enable automatic rate adapation (done by firmware and hardware). | Marcus Glocker |
2006-11-24 | From Jon Simola <jsimola@gmail.com>: | Marcus Glocker |
2006-11-24 | regen | Brad Smith |
2006-11-24 | add the Broadcom BCM5709 PCI id. | Brad Smith |
2006-11-24 | When copying out struct statfs to userland, we need to zero out the fsid | Artur Grabowski |
2006-11-24 | add support to tag ipsec traffic belonging to specific IKE-initiated | Reyk Floeter |
2006-11-24 | never call an ioctl without process context! this diffs checks the | Reyk Floeter |
2006-11-24 | replace a magic number (reserved TX descs?) with macro | Brad Smith |
2006-11-24 | regen | Brad Smith |
2006-11-24 | add the DLink DWL-G120 product id. | Brad Smith |
2006-11-23 | Remove 802.11a stuff. There is one RF chip (88W8030) which supports 5GHz, | Marcus Glocker |
2006-11-23 | Do not attach second port on dual port cards for now. | Mark Kettenis |
2006-11-23 | Set some more power management bits; makes Yukon-2 XL work somewhat. | Mark Kettenis |
2006-11-23 | The duration field is calculated by the firmware. Remove malo_txtime() | Marcus Glocker |
2006-11-23 | OpenBSD-ify the HW VLAN tag insertion code. | Brad Smith |
2006-11-22 | add the BCM4312 PCI id. | Brad Smith |
2006-11-22 | Be more generous with interrupt disabling in the scheduler. | Miod Vallat |
2006-11-22 | The softintr lock needs to be an __mp_lock, not a __cpu_simple_lock. | Miod Vallat |
2006-11-22 | style(9): remove variables names from prototypes. | Damien Bergamini |
2006-11-22 | Remove rssadapt(9) bits; Firmware supports rate adaption. Also, | Marcus Glocker |