summaryrefslogtreecommitdiff
path: root/sys
AgeCommit message (Expand)Author
2011-03-28Include mlphy(4) to the kernels that include tl(4).Claudio Jeker
2011-03-28Add mlphy(4) a driver for the MicroLinear 6692 Ethernet PHYs.Claudio Jeker
2011-03-28Clean nodes until the number of cached nodes is smaller than the maximum numberMark Kettenis
2011-03-27Save r4-r18. Even though the firmware specification says these registers areMark Kettenis
2011-03-27Make sure the message buffer area is not zeroed unconditionaly, instead letMiod Vallat
2011-03-26oops. the frame rate is the inverse of the frame interval. fixesJacob Meuser
2011-03-26use 'sizeof(struct usb_video_frame_desc)' instead of a hardcodedJacob Meuser
2011-03-26fill in the timestamp when copying a frame into the mmap bufferJacob Meuser
2011-03-26fill in support for VIDIOC_ENUM_FRAMEINTERVALSJacob Meuser
2011-03-26support VIDIOC_S_PARM and VIDIOC_G_PARM. these ioctls are used forJacob Meuser
2011-03-26print the supported frame intervals when printing the frame descriptorJacob Meuser
2011-03-25* don't try to align our array of frame descriptors with theJacob Meuser
2011-03-25* the mjpeg and uncompressed video frame descriptor structures areJacob Meuser
2011-03-25* empty the queue of frames in the mmap frame buffer and set theJacob Meuser
2011-03-25Include original rdomain in DIOCNATLOOK. This allows userland proxiesClaudio Jeker
2011-03-24Reassemble IPv6 fragments in pf. In the forward case, pf refragmentsAlexander Bluhm
2011-03-24Process interrupts in priority order. Joint work with jsing@.Mark Kettenis
2011-03-24remove whitespaceRobert Nagy
2011-03-23regenJonathan Gray
2011-03-23add a bunch of new em/ix devices found in intel driversJonathan Gray
2011-03-23Extract the address family independent functions from pf fragmentAlexander Bluhm
2011-03-23Including <sparc64/intreg.h> here is ugly, but intr.h only comes fromTheo de Raadt
2011-03-23Normalize sentinel. Use _MACHINE_*_H_ and _<ARCH>_*_H_ properly and consitently.Paul Irofti
2011-03-23renegade tabs, no binary changeMarco Peereboom
2011-03-23only read from the UART if there is something to read. fix beagle, otherwiseFederico G. Schwindt
2011-03-23Don't process ICMP6 redirects by default anymore. This is in line withClaudio Jeker
2011-03-23With pf IPv6 fragment reassembly, a large packet gets refragmentedAlexander Bluhm
2011-03-22Extract the new function ip6_fragment() from ip6_output() to makeAlexander Bluhm
2011-03-22Increase number of EBRs we can transit looking for the OpenBSD partitionKenneth R Westerback
2011-03-22no need for a xxxpower function; ok drahnTheo de Raadt
2011-03-22silently clear the endpoint when the device has failed; ok jakemsrTheo de Raadt
2011-03-22renegade spaces; no binary changeMarco Peereboom
2011-03-22Support for NetMos Nm9922 dual serial port cardsMike Larkin
2011-03-22Support for NetMos Nm9922 dual serial port cardsMike Larkin
2011-03-22Support for NetMos Nm9922 dual serial port cardsMike Larkin
2011-03-20When reading MXCSR from userland sigcontext or a ptrace request,Philip Guenthe
2011-03-20Update URI to data sheet. New location found on www.davicom.com.tw butMichael Knudsen
2011-03-20changes the values of boolean comparisons from 0:1 to 0:-1 (from ACPI Spec) i...Jordan Hargrave
2011-03-19move to 64-bit daddr_t; ports tree will follow i hopeTheo de Raadt
2011-03-19Make amd64/i386 installboot error out if /boot would cross theKenneth R Westerback
2011-03-19Add the ONDA MSA110UP USB modemDavid Coppa
2011-03-19syncDavid Coppa
2011-03-19Add the ONDA MSA110UP USB modemDavid Coppa
2011-03-19Repair spoofing. We want to start at 'i', not 'j'.Kenneth R Westerback
2011-03-18Fix stdetach() to call vdevgone() with the right device minor numbers.Matthew Dempsky
2011-03-18Add some delay between a successful keyboard reset sequence and a keyboardMiod Vallat
2011-03-18Fix obj directory probing to support cross compiling.Matthew Dempsky
2011-03-18Fix firmware loading at startup (and resume); from Tim van der MolenTheo de Raadt
2011-03-18Old-style MTRRs were never used on amd64, so remove the remaining tracesPhilip Guenthe
2011-03-18Add ukdetach() so that detaching an unknown SCSI device doesn't resultMatthew Dempsky