summaryrefslogtreecommitdiff
path: root/sys
AgeCommit message (Collapse)Author
2006-08-11Let the windowmove() callbacks return whether they could perform the operationMiod Vallat
or not, so that we can always feed them the complex operations before falling back to rasops; and then topcat can perform coloured solid fills in erase{cols,rows}.
2006-08-11add rum(4) on arches where ural(4) is enabled.Damien Bergamini
rum(4) has been tested on i386 by niallo@ and me and on sparc64 by Pablo Mendez Hernandez so I assume it is endian safe and 64bit clean.
2006-08-11no O2's with a R14000 CPU were made, so remove superfluous code.Jasper Lievisse Adriaanse
ok pefo
2006-08-10RegenMiod Vallat
2006-08-10Try and determine the keyboard layout from its identification string;Miod Vallat
no international keyboards to check I parse the right part of the string, at least domestic keyboards are not affected; hinted at by the old X11R5 server.
2006-08-10Embed device list comments in generated hildevs_data.h file; no functionalMiod Vallat
change.
2006-08-10Handle the ``arrow repeat'' special scancode on button boxes; from the oldMiod Vallat
X11R5 server, untested.
2006-08-10No need for needs-flag for hil and hilms.Miod Vallat
2006-08-10- eliminate re-initialization's when adding IP addresses.Brad Smith
- simplify ioctl handler.
2006-08-10match the Coastal ChipWorks TNC-X (yet another uftdi)Jason Wright
2006-08-10yet another uftdi: Coastal ChipWorks TNC-XJason Wright
2006-08-10- ANSI functionsBrad Smith
- de-register - remove return at the end of void functions - some cosmetic tweaking
2006-08-10- move the promiscuous mode handling code to xl_setpromisc() and simplifyBrad Smith
the ioctl handler. - eliminate re-initialization's when adding IP addresses.
2006-08-10move the promiscuous mode handling code to sis_setpromisc() and simplifyBrad Smith
the ioctl handler.
2006-08-10- xge_mcast_filter() -> xge_setmulti().Brad Smith
- move the promiscuous mode handling code to xge_setpromisc() and simplify the ioctl handler.
2006-08-10Fix a panic when more than the default number of sempahores areTodd C. Miller
allocated. Problem debugged by thib@
2006-08-10- Use BUS_DMA_NOWAIT flag with bus_dmamap_create() in xge_attach() for theBrad Smith
creation of transmit and receive DMA maps. - Fix typos in xge_alloc_rxmem(), make sure to destroy and unmap the RX descriptor map instead of the TX descriptor map when encountering an error. From Gireesh Nagabhushana @ Neterion
2006-08-10fix a use-after-free (read) of a mbuf in wpi_tx_intr().Damien Bergamini
2006-08-10tell if chipset supports MIMO in dmesg output.Damien Bergamini
2006-08-10unmap memory address space in bnx_release_resources().Brad Smith
2006-08-10cosmetic tweaking.Brad Smith
2006-08-10remove typedef's.Brad Smith
2006-08-10Hookup hw.vendor and hw.product sysctls on sparc64.Gordon Willem Klok
ok dlg@, "looks good" miod@
2006-08-10just use BYTE_ORDER directly instead of setting the drivers endian flags.Brad Smith
2006-08-10fix an obvious typo. found by Quentin Garnier.David Gwynne
2006-08-09Use the blitter again for the cursor on non-mono frame buffers.Miod Vallat
2006-08-09cosmetic tweaks.Brad Smith
2006-08-09add sys/timeout.hBrad Smith
2006-08-09Change #if __LP64__ to #ifdef __LP64__ as requested by bradMarco Peereboom
2006-08-09Reorder dmamap & dmamem to match man page.Marco Peereboom
Redo detection of _LO & _HI macro; help from miod and jordan. ok beck brad
2006-08-09Propagate error on getnewbuf(), effectively allowing callers to bePedro Martelletto
notified of posted signals for the current process, okay tedu@. Based on initial diagnosis by R. Tyler Ballance <tyler@bleepsoft.com>
2006-08-09On detach the bus space was not unmapped correctly which could lead toMarcus Glocker
a panic. Fix it. Diff received by Marc Winiger <mw@msys.ch> - thanks! ok claudio@
2006-08-09define the size of regions in the register space in terms of bytes, notDavid Gwynne
dwords
2006-08-09mega-commit of unrelated changes to bring rum(4) into a working state.Damien Bergamini
more to come but works well enough for me to commit this over a rum(4). it shares a lot of code with ral(4) rt2661.c. thanks to jsg@ for sending me a rum(4).
2006-08-09flags for register TXRX_CSR4 were shifted one bit too much on the left.Damien Bergamini
this has probably affected short preamble support as well as hardware multi-rate retries settings.
2006-08-09fix endianness. this should give rate adaptation a better chance to workDamien Bergamini
on big endian architectures.
2006-08-09update the version I am tracking.Brad Smith
2006-08-09revert rev 1.119 as this seems to cause problems with some PHY.Brad Smith
2006-08-09Sync up to Intel's latest FreeBSD em driver (6.1.4). Adds PCI id for the PCIeBrad Smith
quad port copper adapter, improvements for media support with fiber adapters, and some fixes for the ICH8 support.
2006-08-09regenBrad Smith
2006-08-09add Intel 82571EB PCI Express quad port PCI id.Brad Smith
From Intel's FreeBSD driver.
2006-08-09Use the DMA map size from the DMA map instead of the dma_size field withBrad Smith
bus_dma sync's. ok dlg@ marco@
2006-08-09regenBrad Smith
2006-08-09add another Intel 5000 PCIe bridge and another Intel 6321ESB USB port.Brad Smith
2006-08-08Some KNF.Marcus Glocker
2006-08-08A more flexible method for deciding what firmware filenames to load.Jonathan Gray
ok mglocker@
2006-08-08Don't yell about failed channel enabling in none-debug mode, because weMarcus Glocker
use a static number of channels. ok jsg@
2006-08-08Mention which MAC we are using (ACX100 or ACX111) and fixJonathan Gray
newline in cardbus attachment.
2006-08-08Print a string for radio type.Jonathan Gray
2006-08-08regenBrad Smith
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-02 11:03:29 +0000