summaryrefslogtreecommitdiff
path: root/sys
AgeCommit message (Expand)Author
2007-09-15Give hardware physical addresses and add some missingJonathan Gray
2007-09-15realy -> really in comments. Most reported on tech@ by Jung.Kenneth R Westerback
2007-09-15[fF]uther -> [fF]urther in comments and man page. First one spotted onKenneth R Westerback
2007-09-15most of the remaining bus_dma conversionJonathan Gray
2007-09-15Convert bus_dmamap_sync() calls.Jonathan Gray
2007-09-15Convert bus_dma_load_mbuf() calls and remove unrequired callbackJonathan Gray
2007-09-15fix error introduced by my previous commit:Hans-Joerg Hoexer
2007-09-15suitible -> suitableBrad Smith
2007-09-15replace ctob and btoc with ptoa and atop respectivelyMartin Reindl
2007-09-15convert bus_dmamap_unload() callsJonathan Gray
2007-09-15convert bus_dmamap_load() callsJonathan Gray
2007-09-15Properly fill in some of the pci information the driver uses internally.Jonathan Gray
2007-09-15define BWI_DEBUG to make things easierJonathan Gray
2007-09-14add the NVIDIA MCP73/MCP77 IDE controller PCI ids.Brad Smith
2007-09-14- correct error message if pci_mapreg_map() fails by not printing theBrad Smith
2007-09-14regenBrad Smith
2007-09-14add the Marvell Yukon 2 88E8048 PCI id.Brad Smith
2007-09-14add two new chip revisions.Brad Smith
2007-09-14Get firmware load working. Adapt firmware routines that way so we canMarcus Glocker
2007-09-14correct type printingTheo de Raadt
2007-09-14Use our standard ratesets from ieee80211 instead.Marcus Glocker
2007-09-14Sort prototypes.Marcus Glocker
2007-09-14Another cleanup run.Marcus Glocker
2007-09-13Here too: Convert MALLOC/FREE to malloc/free and use M_ZERO where applicable.Hans-Joerg Hoexer
2007-09-13Convert MALLOC/FREE to malloc/free and use M_ZERO where applicable.Hans-Joerg Hoexer
2007-09-13MALLOC/FREE -> malloc/free and M_ZERO changesCharles Longeau
2007-09-13Move all debug lines to DPRINTF. KNF. Fix some tweaks while there.Marcus Glocker
2007-09-13Remove unnecessary memset() (see aml_evalnode(9)) and a bit of KNF.Michael Knudsen
2007-09-13syncDamien Bergamini
2007-09-13+ Ralink Tech. RT2860Damien Bergamini
2007-09-13Add if_detach(). Fixes kernel crash when detaching cardbus device.Marcus Glocker
2007-09-13A few %n/%r/%z format strings were missed, convert these to db_format().Miod Vallat
2007-09-13regenBrad Smith
2007-09-13sync AMD SB600 PCI id with the new name.Brad Smith
2007-09-13rename the AMD SB600 SMBus controller entry to X00 since this sameBrad Smith
2007-09-13spacing nit.Brad Smith
2007-09-13Add the NVIDIA MCP73 SMBus controller.Brad Smith
2007-09-13Fix sc_dev tweak. Device attaches with correct name now.Marcus Glocker
2007-09-13Ops, remove temporary debug line.Marcus Glocker
2007-09-13Forgot to set psc->psc_pcitag. Replace all PCI/Cardbus config spaceMarcus Glocker
2007-09-13No variable names in prototypes.Marcus Glocker
2007-09-13Enable access to PCI and Cardbus config space from the driver. Lets usMarcus Glocker
2007-09-13Don't bother bitching if APM does not exist. PleantyTobias Weingartner
2007-09-13Implement ACPI 6.5.1 spec tree walk for _STA and _INI.Tobias Weingartner
2007-09-13regenBrad Smith
2007-09-13add the NVIDIA MCP73 SMBus controller PCI id.Brad Smith
2007-09-13- correct an unknown Marvell SATA entry to use the appropriateBrad Smith
2007-09-13- remove the bogus second AHCI PCI id for the AMD SB600 chipset.Brad Smith
2007-09-13adapt to new hx/non-hx type-selection algorithm from linux/dragonfly; ok jsgTheo de Raadt
2007-09-13define the fc port config page 1.David Gwynne
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 01:30:25 +0000