summaryrefslogtreecommitdiff
path: root/sys
AgeCommit message (Expand)Author
2006-01-30Add basic radiotap support. Modelled somewhat afterJonathan Gray
2006-01-30only flush the TX descriptors in re_start() if there are packetsBrad Smith
2006-01-30reduce the timeout waiting for command completions from 5 seconds to .1David Gwynne
2006-01-29remove printf on ath_cardbus_power; reyk@ ok.Federico G. Schwindt
2006-01-29regenBrad Smith
2006-01-29add VT6410 IDE PCI id.Brad Smith
2006-01-29Disable iic whenever ipmi is enabled. This fixes boxes like Sun x4200 thatMarco Peereboom
2006-01-29SMC91CXX NuBus hooksMartin Reindl
2006-01-29re-enable scatter and fix scanning of 802.11a channels.Damien Bergamini
2006-01-29Don't probe address 0x4f.Mark Kettenis
2006-01-29Add a alpha_shared_intr_reset_strays() function that resets the strayMartin Reindl
2006-01-29Use usbd_clear_endpoint_stall_async() when clearing endpoint stalls inBrad Smith
2006-01-29prettify dmesg output a touch. from Michael Knudsen.David Gwynne
2006-01-29Don't ask bus_dmamem_alloc() for zero bytes. 'bioctl -H x:y amiz' noKenneth R Westerback
2006-01-29index the drive labels from 0 instead of 1 to match the labels on the frontDavid Gwynne
2006-01-28Fix hmac calculation.Marco Pfatschbacher
2006-01-28a little cleaning.Brad Smith
2006-01-28Move address checks forward. Cleanup comments.Mark Kettenis
2006-01-28Consider temperatures below -45 degC to be invalid for Winbond chips.Mark Kettenis
2006-01-28Disable ds1624/ds1631/ds1721 probe.Mark Kettenis
2006-01-28Rename lm_isa.c to lm78_isa.c. Now that there isn't really any NetBSD codeMark Kettenis
2006-01-28Rename lm_i2c.c to lm78_i2c.c.Mark Kettenis
2006-01-28remove 2 printf's from dc_coal() too.Brad Smith
2006-01-28get rid of the sensors globals. theyre were only used by sysctl forDavid Gwynne
2006-01-28Make sure that HW VLAN stripping is not enabled and remove unused codeBrad Smith
2006-01-28remove printf's from dc_newbuf().Brad Smith
2006-01-27Oops, removed too many includes in 1.34 by mistake; spotted matthieu@Miod Vallat
2006-01-27Use letoh32 to print out configuration descriptors in debug functions. NowClaudio Jeker
2006-01-27add iwi(4).Brad Smith
2006-01-26Add glenv(4).Mark Kettenis
2006-01-26Fix printf.Mark Kettenis
2006-01-26Make lm at iic detach properly, and use config_detach(9) to fully detachMark Kettenis
2006-01-26make timecounter behave; grange@ okMichael Shalayeff
2006-01-26Make T1 work on the dual port version. Time slot map is different than onClaudio Jeker
2006-01-26Some fixes to make the card work on big endian systems. Still not enoughClaudio Jeker
2006-01-26Switch to __HAVE_DEVICE_REGISTER to find the device we're booted from.Miod Vallat
2006-01-26Fix character range check in local atoi() function. krw@ "looks correct"Aaron Campbell
2006-01-26regenBrad Smith
2006-01-26add Promise SATA-II chipsets and fix ordering of some existing entries.Brad Smith
2006-01-25Wow, this is clearly wrong (found in esa_set_params):Brad Smith
2006-01-25Duh! If askes to halt the input dont halt the output instead. This alsoBrad Smith
2006-01-25Fix problem in ioctl() handling in OSS audio emulation which causedBrad Smith
2006-01-25reduce stack use; pedro@ miod@ okMichael Shalayeff
2006-01-25- Count packets discarded by RX/TX MAC (cause of FIFO overflow, etc)Brad Smith
2006-01-25kthread_create_deferred() do the things right, no need forAlexander Yurchenko
2006-01-25Prevent division by zero, and make it actually update the fan sensors.Mark Kettenis
2006-01-25Time-slot mask are u_int32_t so art_mask_tsmap() should return u_int32_t too.Claudio Jeker
2006-01-25Check if the dma ring got cleared before accessing it. Fixes a panic thatClaudio Jeker
2006-01-25Add additional debug function to print framer error counters.Claudio Jeker
2006-01-25Reset and initialize part of the device early. Makes reading the ROM moreClaudio Jeker