summaryrefslogtreecommitdiff
path: root/sys
AgeCommit message (Expand)Author
2010-01-10ATI AHCI seems not to put slot number into the command registerAlexander Yurchenko
2010-01-10Make sure END() matches the *{LEAF,ENTRY}() function names.Miod Vallat
2010-01-10Fix two bugs in IPsec/HMAC-SHA2:Markus Friedl
2010-01-10GCC doesn't respect the aligned attribute for automatic variables. SoMark Kettenis
2010-01-10Set XL_FLAG_FUNCREG for "cyclone" variants. This makes them see interruptsMark Kettenis
2010-01-10Reimplement kvm_getproc2()'s support for reading crash dumps andPhilip Guenthe
2010-01-10My mistake. There was one more driver paranoid enough to checkKenneth R Westerback
2010-01-10A couple of missed ITSDONE setting before scsi_done().Kenneth R Westerback
2010-01-10Set ITSDONE in scsi_done() and zap trivial instances of setting itKenneth R Westerback
2010-01-10Do not try to reevaluate the current RX production index on eachChristian Weisgerber
2010-01-09L2 cache line is at least 64 bytes long on r10k, so use 64 byte increments toMiod Vallat
2010-01-09Make interrupt depth counters per-cpu.Miod Vallat
2010-01-09Move more R5000 code behind proper #ifdef stanzas.Miod Vallat
2010-01-09Move cache information from global variables to per-cpu_info fields; thisMiod Vallat
2010-01-09Zap all setting of ITSDONE in drivers that don't look at it. NobodyKenneth R Westerback
2010-01-09a lot of knf loving. hudge diff, no binary change.Dariusz Swiderski
2010-01-09panic with a nice message if scsi_xs_sync_done gets called twiceDavid Gwynne
2010-01-09dont try to prevent multiple concurrent runs of a devices start routineDavid Gwynne
2010-01-09always try to restart io on a device when an opening is made available fromDavid Gwynne
2010-01-09Define struct cpu_hwinfo, to hold hardware specific information about eachMiod Vallat
2010-01-09No need to call bpfdetach() in mpe_clone_destroy() since this is done inClaudio Jeker
2010-01-09Correctly check /dev/kmem offsets within directly translated segments (XKPHYSMiod Vallat
2010-01-09workaround for a HW bug (does not affect 4965AGN) that may sporadicallyDamien Bergamini
2010-01-09Avoid mulitple calls to scsi_done() on the same xs by havingKenneth R Westerback
2010-01-09Add support for the Broadcom BCM57765 ASIC and newer BroadcomChristian Weisgerber
2010-01-09replace an #ifdef IX_CSUM_OFFLOAD with an IFCAP_CSUM_IPv4 capability check,Reyk Floeter
2010-01-09Explicitly turn on mii/gmii/rgmii for the 178/gigabit devicesJonathan Gray
2010-01-09Fix the IP ckecksum offloading logic that disables and breakes offloadingReyk Floeter
2010-01-09Add code to stop scheduling processes on CPUs, effectively halting that CPU.Mark Kettenis
2010-01-09Remove typo and magic numbers from #if 0'd block, from Brad.Stuart Henderson
2010-01-08During "ifconfig $if -inet6" remove v6 addresses even if theStefan Sperling
2010-01-08As advertised in the man page, make open(2) return ELOOP (insteadStefan Sperling
2010-01-08Fix compile failure on MP kernel(missing P_CPU macro on mips64/mips64/context.S)Takuya ASADA
2010-01-08MP-safe FPU handling. ok miod@Takuya ASADA
2010-01-07Repair non-MULTIPROCESSOR kernel compilation.Miod Vallat
2010-01-07Make sure to update p_cpu on MULTIPROCESSOR kernels.Miod Vallat
2010-01-07Rename _rxfilter functions to _iff for consistency. From Brad, ok kevlo@Stuart Henderson
2010-01-07dont use the xs in the scsi_cmd routines after calling ciss_cmd, it mightDavid Gwynne
2010-01-07CISS_UNLOCK before returning from the scsi_cmd handler when we hit NO_CCB.David Gwynne
2010-01-07Enable IPI interrrupt in trap. ok miod@Takuya ASADA
2010-01-07warn if scsi_done has been called twice on an xs in the scsi_xs_sync pathDavid Gwynne
2010-01-06syncStuart Henderson
2010-01-06Add Canon PowerShot SX100, Linksys WUSB600N v2 (new version of RT2870). From ...Stuart Henderson
2010-01-06syncStuart Henderson
2010-01-06New Broadcom nics, from Linux driver via Brad.Stuart Henderson
2010-01-05- properly spell "packet".Jasper Lievisse Adriaanse
2010-01-05dont need to end statements with two semicolons. one is enough.David Gwynne
2010-01-05Dynamic allocation for ASID and ASID generation number on struct pmap. ok miod@Takuya ASADA
2010-01-05only call disk_unbusy when we're finished with the io (or we're requeuingDavid Gwynne
2010-01-05atapiscsi didnt call scsi_done when the xfer had SCSI_POLL set. this isDavid Gwynne