summaryrefslogtreecommitdiff
path: root/sys
AgeCommit message (Collapse)Author
2005-05-12RegenMiod Vallat
2005-05-12Define a specific map for the Apple portuguese USB keyboards.Miod Vallat
Based on input from Manuel Pata and Rodolfo Gouveia on tech@.
2005-05-12Define a keyboard layout variant for Apple international USB keyboards, whichMiod Vallat
sometimes sligthly differ from the canonical layout.
2005-05-12Minimal terminal line discipline support to stop the boot timeoutUwe Stuehler
after the first keystroke, as on other platforms.
2005-05-11Reset IO completion values to 0 to disable completion holdof. This improvesMarco Peereboom
read performance. This will only work with firmwares that are launched post 5/13/2005. Help LSI, ok mickey@
2005-05-11no need to include '\n' on a panic(), fix two typos,Pedro Martelletto
from Leonardo C. Filho <leonardo@fesppr.br>, thanks!
2005-05-11prettier; ok uweTheo de Raadt
2005-05-11Add get and set completions opcodes.Marco Peereboom
2005-05-11extra checks for monitor modeReyk Floeter
2005-05-11Do not call mii_pollstat() immediately after mii_tick().Brad Smith
From FreeBSD
2005-05-11Do not call mii_pollstat() from within device tick routines; the statusBrad Smith
information is updated by mii_tick(). From FreeBSD
2005-05-11remove comment which is not valid anymoreBrad Smith
2005-05-11- Also match on Yukon LP's for the Lite rev A0 test.Brad Smith
- Do not call mii_pollstat() from within device tick routines; the status information is updated by mii_tick(). - Take PHY out of reset for Yukon Lite rev A3. This resolves the intermittent "no PHY found!" issue. From FreeBSD - Recognize some newer Yukon chipsets ok krw@, tested by krw@ and a few others, mostly with LOM Lite A3's but also with some other ASIC revs too.
2005-05-10enable arm optimized in4_cksumBrad Smith
ok drahn@
2005-05-10support NULL encryption for ESP; ok hshoexer, hoMarkus Friedl
2005-05-10In DIOCKILLSTATES: take into account the direction of the state whenJoel Knight
matching source and destination addresses/ports. ok henning@ dhartmei@ mpf@
2005-05-10add epic commented outMichael Shalayeff
2005-05-10after copyin/out fpu regs flush and purge as they gonna be accessed from ↵Michael Shalayeff
phys later; from chs
2005-05-10explicitly align unwind data to 8 bytes; from chsMichael Shalayeff
2005-05-10no reason to use long as we are most definately all 32bitMichael Shalayeff
2005-05-10set pcsq in case we get signal delivery once interrupted from the gateway ↵Michael Shalayeff
page; from chs
2005-05-10db_printf(s) -> db_printf("%s", s) from NetBSDUwe Stuehler
2005-05-10enter ddb thru alt-escape.Marc Espie
okay miod@, uwe@
2005-05-10- add vax optimized in4_cksumBrad Smith
- de register and use ANSI prototype From NetBSD ok miod@
2005-05-10ANSI protosBrad Smith
2005-05-10use pci_matchbyid().Brad Smith
2005-05-10- remove commented out headerBrad Smith
- spaces vs tabs
2005-05-10put this in the AtticBrad Smith
2005-05-10Add epic(4) driver which supersedes tx(4).Brad Smith
This buys us.. - bus_dma - big endian support - multicast - support for another EPIC chipset From NetBSD ok mickey@
2005-05-09fixes and updates for root device detection from NetBSD:Martin Reindl
- remove unneeded checks and variables - use strncasecmp() to check b->protocol because the case is dependant on the firmware revision - check logical unit numbers - consistently check PCI function numbers - on the 6600 models check which PCI hierarchy is looked at - makes root device detection on DS20 (6600) work testing by claudio, xsa and miod; ok miod@
2005-05-09- add alpha optimized in4_cksumBrad Smith
- de register and use ANSI prototypes From NetBSD ok miod@ martin@
2005-05-09replace sc_quirk with sc_flags, spotted and ok mickey@Marco Peereboom
2005-05-09Compile if no wsmouse device is configured in the kernel.Miod Vallat
2005-05-09regenBrad Smith
2005-05-09add PCI id for SMC 83C175Brad Smith
2005-05-09Compile without option WSDISPLAY_COMPAT_RAWKBDMiod Vallat
2005-05-09Enable clock to STUART unit, and enable com2 in GENERIC and RAMDISKUwe Stuehler
configurations. The STUARTCONSOLE option doesn't work yet.
2005-05-09Permit one of the PXA2X0's UARTs to operate in Slow Infrared (SIR) modeUwe Stuehler
(half-duplex). I couldn't verify that the real serial port still works (a special serial cable is needed for that).
2005-05-09Added comments, and a new function to control the infrared LED.Uwe Stuehler
2005-05-09Bump version to 2.07. Since the initial version 2.06, symbol tableUwe Stuehler
loading and a few workarounds have been added.
2005-05-09streamline.Marc Espie
okay drahn@
2005-05-09ansify. no binary change.Marco Pfatschbacher
OK henning, krw, brad, moritz
2005-05-09Make sure that prefixes get purged.Brad Smith
Fixes PR 3939. From NetBSD ok itojun@
2005-05-09RegenMiod Vallat
2005-05-09Add a note reminding people to regen gsc and usb maps after changing this file.Miod Vallat
2005-05-09Create the USB keyboard layout tables from the PS/2 tables.Miod Vallat
Eases maintainability, and brings us half a dozen new layouts for free.
2005-05-09Sort the output tables, and mention the rcsid of the converter script inMiod Vallat
the output as well.
2005-05-09PCI_{VENDOR,PRODUCT} -> CARDBUS_{VENDOR,PRODUCT} for correctness.Brad Smith
no functional change.
2005-05-09add cardbus_matchbyid(), mimics the PCI layers pci_matchbyid().Brad Smith
2005-05-08change the dmesg output: print known chipset names, don't print theReyk Floeter
supported 802.11a/b/g modes (this could be discovered with ifconfig -m athX). inspired by Johan M:son Lindman and others asking about the several different ARxxxx chipset combos.