summaryrefslogtreecommitdiff
path: root/sys
AgeCommit message (Expand)Author
2003-01-30there is no need for a MCOUNT, gcc prepares everything and calls _mcount() al...Michael Shalayeff
2003-01-30no need to force cflags hereMichael Shalayeff
2003-01-30reread the dma status reg after playing part of the dma got programmed.Michael Shalayeff
2003-01-30regen now that setreuid/setregid have moved out of compat and into kernTodd C. Miller
2003-01-30Bring back setreuid(2) and setregid(2) as first class syscallsTodd C. Miller
2003-01-30real meat in audio_device; discussed w/ jason@Michael Shalayeff
2003-01-30Check the codec revision... if it's >=CS4215E or >=AD1849K (same valueJason Wright
2003-01-29check the uvm_fault_wire() for failure, just like other calls; art@ okMichael Shalayeff
2003-01-29save fpregs in coredumpMichael Shalayeff
2003-01-29enable scsi and sync w/ genericMichael Shalayeff
2003-01-29oops, test-compiled the wrong source, missing parenMichael Shalayeff
2003-01-29make it work on both yamaha and ensoniq mpus; from hunter@dg.net.uaMichael Shalayeff
2003-01-29moved some stuff into hppa.htmlMichael Shalayeff
2003-01-29ref bit is reverse meaning in the pte, therefore should beMichael Shalayeff
2003-01-29typos;Jason McIntyre
2003-01-29print out the codec revision in dmesgMichael Shalayeff
2003-01-29fix typo. majver should be minverTed Unangst
2003-01-28add a rule to built bzero.po as wellMichael Shalayeff
2003-01-28Japanese type 5 layout; from a picture of the actual layout on sunsolve,Miod Vallat
2003-01-28harmony is there, 10x to jasonMichael Shalayeff
2003-01-28Ok, you can only set the HE/SE/LE/IS bits in GAINCTL when reset is asserted (...Jason Wright
2003-01-28Move device driver specific stuff to *var.h and add most of the code forJason Wright
2003-01-28Remove (now) bogus diagnostic check and set the output length correctly (why ...Jason Wright
2003-01-28pad < minimal length packets with 0's; based on netbsd; tested by miodJason Wright
2003-01-27Do not clean too far.Miod Vallat
2003-01-27Stupid stupid stupid... DMA will not start until the capture next registerJason Wright
2003-01-27M_VMPVENT bites the dust; requested by art@ long ago.Miod Vallat
2003-01-27padd < mimimum sized frames with 0's instead of whatever the chip wants; base...Jason Wright
2003-01-27pad minimum frames with 0's; based on netbsdJason Wright
2003-01-27pad tx buffer on < minimum length frames; based on NetBSD; tested on hppa.Jason Wright
2003-01-27Convert m68k pmap from physseg to VM_PAGE_MD.Miod Vallat
2003-01-27As promised, I got some sleep and rewrote most of the driver... playbackJason Wright
2003-01-27Pad tx buffer with 0's on minimum sized frames; based on NetBSD.Jason Wright
2003-01-27separate register defns and revise them based on the LASI info... a HUGEJason Wright
2003-01-27I declare defeat... once interrupts are enabled, just leave them enabled.Jason Wright
2003-01-27Write to the cntl register with the c flag set.Jason Wright
2003-01-26add harmonyJason Wright
2003-01-26compute record high water mark from record parameters not play parameters; fr...Jason Wright
2003-01-26Ok, playback more or less works, now for capture. (I forgot to save the pint...Jason Wright
2003-01-26Ok, this now produces some noise (that's the best way I can describe it),Jason Wright
2003-01-26regenMichael Shalayeff
2003-01-26a bunch of devices used in hp machinesMichael Shalayeff
2003-01-26Start on the harmony audio driver. It doesn't play or capture anythingJason Wright
2003-01-25Fix the behaviour of rdr rules which redirect to a range of ports;Ryan Thomas McBride
2003-01-25Fix a bug that potentially caused fragments to be dropped when theDaniel Hartmeier
2003-01-25Grr.. add a missing cdev_notdef() so that 35 really is the audio deviceJason Wright
2003-01-25don't send more than half of the send buffer space limit inMarkus Friedl
2003-01-25updateMichael Shalayeff
2003-01-25De-"register"Jason Wright
2003-01-25hppa provides its own IPL_AUDIO, tooJason Wright