| Age | Commit message (Expand) | Author |
|---|
| 2006-08-28 | properly detect failed drives and do not crash bioctl; krw@ testing | Michael Shalayeff |
| 2006-08-28 | Fix manual media types by always leaving the PHY in autoneg mode but adjusting | Brad Smith |
| 2006-08-28 | bzero() the sensor memory after allocating it. | Kenneth R Westerback |
| 2006-08-28 | set error and break -- not return an error before spl is set back in ioctl! f... | Michael Shalayeff |
| 2006-08-28 | add a BGE_JUMBO flag. | Brad Smith |
| 2006-08-28 | turns out the volume info contains a bitmap of failed physdisks in it, so | David Gwynne |
| 2006-08-28 | Dell PCI vendor subid. | Brad Smith |
| 2006-08-28 | Set the BGE_NO3LED flag to properly adjust the PHY LED mode if attaching | Brad Smith |
| 2006-08-27 | display proper volume device name in the volume line (; krw@ testing | Michael Shalayeff |
| 2006-08-27 | it works a little better like this. | Brad Smith |
| 2006-08-27 | Enable HORRID_III_HACK, but make sure we only disable the data cache on | Mark Kettenis |
| 2006-08-27 | pack several boolean fields into the existing bge_flags field. | Brad Smith |
| 2006-08-27 | basic monitoring and management support. there are a few more things to fix b... | Michael Shalayeff |
| 2006-08-27 | Use the correct IGN for the B side of schizo. Makes interrupts actually work | Mark Kettenis |
| 2006-08-27 | Work-in-progress VXT2000 support (commented out in GENERIC so far). Glass | Miod Vallat |
| 2006-08-27 | Extract the device-independent parts of dzms, to let lkms@non-dz exist. | Miod Vallat |
| 2006-08-27 | Move cfdriver structs to better places, in preparation for new attachments. | Miod Vallat |
| 2006-08-27 | sigh, this is annoying. it appears that the arc firmware doesnt care if a | David Gwynne |
| 2006-08-27 | try to get the status of the volume out of the arc firmware and into | David Gwynne |
| 2006-08-27 | if a disk dissapears out of a raidset, then the raid info will list its id | David Gwynne |
| 2006-08-27 | little nit | David Gwynne |
| 2006-08-26 | Doh, compile before commit. | Miod Vallat |
| 2006-08-26 | Enable all planes in the ramdac as well, so that color really works. | Miod Vallat |
| 2006-08-26 | Remove ifdef/ifndef __OpenBSD__ maze so only what we use is left. | Jonathan Gray |
| 2006-08-26 | Set flags to 0x0001 for fintek(4), to make the fans run at full speed. | Mark Kettenis |
| 2006-08-26 | Cleanup. Add config flag to make fans blast at full speed. | Mark Kettenis |
| 2006-08-25 | Be a little less agressive in declaring the change pending bit stuck, increase | Gordon Willem Klok |
| 2006-08-25 | forget about >4g memory if not switched to pae in order to disable all the bo... | Michael Shalayeff |
| 2006-08-25 | update for the Triware to 3ware renaming and use pci_matchbyid(). | Brad Smith |
| 2006-08-25 | regen | Brad Smith |
| 2006-08-25 | - rename TRIWARE to 3WARE | Brad Smith |
| 2006-08-25 | Disable interrupts during the attach of UHCI and EHCI controllers. If | Christopher Pascoe |
| 2006-08-25 | fill in the controllers name in the inq ioctl. spotted by deraadt@ | David Gwynne |
| 2006-08-25 | don't need to clear if_timer during attach. | Brad Smith |
| 2006-08-25 | only write to the RMAC_CFG_KEY register for the Xframe chipset. | Brad Smith |
| 2006-08-25 | Allow the driver to compile with MSK_DEBUG. | Brad Smith |
| 2006-08-24 | Add some first PCI glue. | Marcus Glocker |
| 2006-08-24 | Add a few printfs to slow down SGEC initialization - somehow this appears | Miod Vallat |
| 2006-08-24 | missing newline in a printf | Theo de Raadt |
| 2006-08-24 | Off-by-one in ``dmesg'' command; it takes a vax to find such bugs. | Miod Vallat |
| 2006-08-24 | Same change as on amd64. Don't propogate low level errors to userland. | Gordon Willem Klok |
| 2006-08-24 | Fix a few more cases where we propogate low level errors to userland. | Gordon Willem Klok |
| 2006-08-24 | Check for a selftest failure after reset in the correct register. | Miod Vallat |
| 2006-08-24 | Enable the appropriate serial transmitters in VXT2000 serial routines, this | Miod Vallat |
| 2006-08-24 | s/IEEE80211_MTU_MAX/IEEE80211_MAX_LEN/ in my previous commit. | Damien Bergamini |
| 2006-08-24 | dont print debug output when the scsi completion path returns with | David Gwynne |
| 2006-08-24 | show the firmware revision of the disks. | David Gwynne |
| 2006-08-24 | report the size of the disks and volumes correctly. | David Gwynne |
| 2006-08-24 | Be sure to print device name in debug messages, remove | Jonathan Gray |
| 2006-08-24 | Add support for HMACs to the via c3/c7 crypto driver. For now, we | Hans-Joerg Hoexer |
