summaryrefslogtreecommitdiff
path: root/sys
AgeCommit message (Expand)Author
2006-03-13* Add "pcitag_t *pba_bridgetag" to pci_attach_args. This is set toBrad Smith
2006-03-13Protect sgmap extents with splvm(); from NetBSD.Miod Vallat
2006-03-13remove IPL_IMP.Brad Smith
2006-03-13remove splimp.Brad Smith
2006-03-13time-bind and lower power in lock spinning and a couple of other ipi loops by...Michael Shalayeff
2006-03-13Set the address decode bit only if the iobase 0 register is available.Federico G. Schwindt
2006-03-13repair commands w/ no scsi_xfer but the affected code was currently dead anyw...Michael Shalayeff
2006-03-13Fix machines that need PCI access during ACPI bringup.Marco Peereboom
2006-03-13Fix machines that need PCI access during ACPI bringup.Marco Peereboom
2006-03-13finner grained use of splbio in scsi_raw_cmd.David Gwynne
2006-03-13finer use of splbio in scsi_cmd.David Gwynne
2006-03-13split the io and synchronise paths for scsi commands going to the logicalDavid Gwynne
2006-03-13ansi/deregister. No binary change.Jonathan Gray
2006-03-12Previous fix was half-done, move the wsscreen_list array into the softcMiod Vallat
2006-03-12Move struct wsscreen_list out of the stack as on sparc.Miod Vallat
2006-03-12When attaching a wsdisplay, the wsscreen_list structure can not be on theMiod Vallat
2006-03-12Don't leave a dangling pointer to the process-specific LDT afterTom Cosgrove
2006-03-12regenBrad Smith
2006-03-12some ATI devices.Brad Smith
2006-03-12make SAFE_DEBUG compile clean; ssehic@gmailTheo de Raadt
2006-03-12mbuf use-after-free; ok henning, djm, bradMarkus Friedl
2006-03-12Make use of pci_matchbyid().Brad Smith
2006-03-12with pcn(4) now in place remove or replace the references to PCI le(4)Martin Reindl
2006-03-12sensors_head is only used in kern_sensors.c, so its unnecessay to declareDavid Gwynne
2006-03-12Properly scale voltage on w83l784r.Mark Kettenis
2006-03-12Match emc6d100 and emc6w201. Fix typo. print rev with 0x prefix.Mark Kettenis
2006-03-12Tweak comment.Mark Kettenis
2006-03-12explicitly initialize a couple variablesJacob Meuser
2006-03-12remove splimp().Brad Smith
2006-03-12IPL_IMP -> IPL_VMBrad Smith
2006-03-12remove splimp.Brad Smith
2006-03-12remove splimp.Brad Smith
2006-03-12remove IPL_IMP and splimp().Brad Smith
2006-03-12IPL_IMP -> IPL_VMBrad Smith
2006-03-12remove IPL_IMP and splimp().Brad Smith
2006-03-12remove IPL_IMP and splimp().Brad Smith
2006-03-12IPL_IMP -> IPL_VMBrad Smith
2006-03-12syncTheo de Raadt
2006-03-12another mouse vendor; minusf@obiit.orgTheo de Raadt
2006-03-12remove BPF filter support if the bpfilter device is removed.Brad Smith
2006-03-11No need to check for !doreallocblks in ffs1_reallocblks() anymorePedro Martelletto
2006-03-11splimp -> spltty/splnetBrad Smith
2006-03-11move PCI softc struct from pci.c to pcivar.hBrad Smith
2006-03-11Add UFS2 block allocation functions, okay tedu@.Pedro Martelletto
2006-03-11cbb needs IPL_VM to be defined now.Miod Vallat
2006-03-11splvm.Brad Smith
2006-03-11remove splimp handler.Brad Smith
2006-03-11regenJonathan Gray
2006-03-11D-Link DWL-G122 rev C1.Jonathan Gray
2006-03-11Check against GIF_MTU_MIN/GIF_MTU_MAX for the min/max MTU size.Brad Smith
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-23 04:28:19 +0000