Age | Commit message (Collapse) | Author | |
---|---|---|---|
2008-03-30 | Enable setting of interrupt timers. | Joel Sing | |
ok dlg@ | |||
2008-03-30 | Fix #ifdef NCOM collateral damage introduced in r1.210. | Kenneth R Westerback | |
ok miod@ kettenis@ | |||
2008-03-30 | Pad the RXD buffer so that packets are aligned on a 128-byte boundary. This | Joel Sing | |
prevents the chip from hard locking the machine when receiving packets. Diff committed from an ASUS EeePC using lii(4). From NetBSD. ok dlg@ | |||
2008-03-30 | Remove for #if 0'ed out code I left behind with the previous commit. | Mark Kettenis | |
2008-03-30 | More sun4v support. GENERIC and RAMDISK kernels will now boot on both | Mark Kettenis | |
sun4u and sun4v. GENERIC.MP won't work yet though. | |||
2008-03-30 | todd@ has 82c686 based auvia(4) devices that do full-duplex | Jacob Meuser | |
properly. restore full-duplex capabilities for 82c686 based devices. | |||
2008-03-29 | Don't double count clock and prof interrupts. | Mark Kettenis | |
2008-03-29 | Fix amd64 and i386 serial console handling for non-default speeds. Bring | Kenneth R Westerback | |
i386 pccom into line with com. Problem reported and first diff by Markus Hennecke, who also tested and corrected subsequent diffs. Boot messages and console now work with his 57K serial connections. Suggestions and ok miod@ | |||
2008-03-29 | enable kate(4); ok deraadt@ | Constantine A. Murenin | |
2008-03-28 | If we fail to load the kernel, drop the user into interactive mode of ARCS, | Joel Sing | |
rather than just rebooting. ok deraadt@, miod@, jasper@ | |||
2008-03-27 | Remove unwanted code and sync with mips64/arcbios.c. | Joel Sing | |
ok miod@ | |||
2008-03-27 | Majorly cleanup/overhaul com @ macebus code. | Joel Sing | |
ok miod@ | |||
2008-03-27 | Data mode can only be changed when updating the clock, so don't bother | Joel Sing | |
trying to change to BCD mode before reading. Also, don't assume that the clock is in 24 hour mode when updating. tested jasper@, ok miod@ | |||
2008-03-27 | add detach support. this has to be the easiest diff for hotplug ever, go | David Gwynne | |
read it :) ok kettenis@ jsg@ | |||
2008-03-27 | test the Vdd registers of Andigilog chips against the minimum voltage readings; | Constantine A. Murenin | |
'good plan' deraadt; ok kettenis, mikeb | |||
2008-03-27 | update the revision cpuid table, removing three duplicate ids from "JH-F" | Constantine A. Murenin | |
and adding two missing ids for Mobile AMD Sempron rev DH-G2; tested todd | |||
2008-03-27 | welcome kate(4), a new driver supporting AMD K8 temperature sensors | Constantine A. Murenin | |
discussed with deraadt and others tested by jasper, deraadt, todd and others | |||
2008-03-26 | Disable some code that reads some sun4u-specific registers for diagnostic | Mark Kettenis | |
reasons, but isn't otherwise used. | |||
2008-03-26 | plug a mem leak. the array of ports wasnt freed on detach. | David Gwynne | |
2008-03-26 | Add DIOCRLDINFO support. | Kenneth R Westerback | |
2008-03-25 | Make pci_intr_map(9) fail if the interrupt line register is set to 0xff. | Mark Kettenis | |
Prevents crashes later on when we try to estabish the interrupt. ok miod@, deraadt@ | |||
2008-03-24 | Make it possible to disable/enable pseudo devices in UKC, config file and | Mats O Jansson | |
at config -e. -moj ok deraadt@ | |||
2008-03-24 | Remove KASSERT that's causing grieve on sun4v, and I've never seen triggered. | Mark Kettenis | |
2008-03-24 | add it(4) at port 0x228, found on some motherboards. | Oleg Safiullin | |
ok deraadt@ | |||
2008-03-24 | We were led astray (like many others before us) to believe that | Theo de Raadt | |
msg_controllen should be CMSG_LEN() instead of CMSG_SPACE() because the kernel fd passing code was erroring out when "cm->cmsg_len != control->m_len" instead of "CMSG_ALIGN(cm->cmsg_len) != control->m_len". On machines with 16-byte alignment, when one thinks about how the ALIGN padding happens, it is clear that msg_controllen has to be CMSG_SPACE() or the kernel cannot hope to bounds check the messages correctly. For now, change the check to cm->cmsg_len > control->m_len to permit the old ABI to continue working. Later perhaps when all the old binaries are gone we can stop permitting their use. lots of discussion with kettenis | |||
2008-03-24 | Use correct cpuid on sun4v. | Mark Kettenis | |
2008-03-24 | auvia(4) doesn't record properly, so don't claim full-duplex | Jacob Meuser | |
capabilities. | |||
2008-03-24 | 8-bit has been emulated for some time now. quit lying. | Jacob Meuser | |
2008-03-24 | Change XXgetdisklabel() to the 'normal' four parameter model to | Kenneth R Westerback | |
prepare for adding missing DIOC* ioctl's. No functional change. | |||
2008-03-23 | Add code to initialize CPUs on sun4v. | Mark Kettenis | |
2008-03-23 | Sigh! The sun4v TTEs have a different layout than sun4u TTEs. Rename the | Mark Kettenis | |
existing sun4u defines and add sun4v. For now, decide which set to use at compile time. Change the sun4u-specific code in locore.s to use the sun4u defines. | |||
2008-03-23 | typo; deraadt | Miod Vallat | |
2008-03-23 | Not-functional-enough driver for the Sun Expert3D cards, put in tree as an | Miod Vallat | |
incentive for further tinkering only; not for the faint of heart. | |||
2008-03-23 | Sometimes the registers claiming the aperture size on 9XX chipsets lie. | Owain Ainsworth | |
So instead, use the size of the aperture BAR to determine the aperture size for agp_i810, and don't let the 855 and above have the aperture set. Next to nothing uses it anyway so no harm. introduce generic_{get,set} aperture which has this behaviour so other drivers may use it if useful. Change inspired by what freebsd did after i noticed my aperture size was wrong. Tested by many, ok kettenis@. | |||
2008-03-23 | setroot() is supposed to be safe in all cases, so kill the special cases | Theo de Raadt | |
for RB_DFLTROOT; ok miod | |||
2008-03-23 | Wrong printf construct. | Miod Vallat | |
2008-03-23 | show all mounts command for ddb. From mickey a long time ago. | Miod Vallat | |
2008-03-23 | Use new defines from pcidevs to match Expert3D. | Miod Vallat | |
2008-03-23 | regen | Miod Vallat | |
2008-03-23 | More 3DLabs devices. | Miod Vallat | |
2008-03-23 | Make ovbcopy() the default bcopy() flavour; requested by deraadt@ some time ago. | Miod Vallat | |
2008-03-23 | Fix ovbcopy() operation when copying shorts backwards, similar to sparc | Miod Vallat | |
locore.s r1.76 | |||
2008-03-23 | Add AGP support for the Intel G33 chipset. | Damien Bergamini | |
Tested on i386 with a Gigabyte G33M-DS2R motherboard (Intel GMA 3100). Based on NetBSD code. ok oga@ | |||
2008-03-23 | enable andl; ok deraadt | Constantine A. Murenin | |
2008-03-23 | New andl(4) driver for Andigilog aSC7611 Hardware Monitor. | Constantine A. Murenin | |
Tested in my i2c sandbox against an i2c dump from D946GZIS, a dmesg for which was kindly donated to our dmesg@. 'commit it' deraadt@ | |||
2008-03-22 | Add support for DIOCRLDINFO, DIOCGPDINFO, DIOCGPART to the fd | Kenneth R Westerback | |
driver(s). Adapted from sd driver. ok marco@ | |||
2008-03-22 | Reintroduce the cputyp variable, and use it to distinguish between sun4u and | Mark Kettenis | |
sun4v. | |||
2008-03-22 | - remove pre-uvm prototype of pmap_page_index() | Jasper Lievisse Adriaanse | |
ok miod@ | |||
2008-03-22 | Nuke some unused magic. | Tobias Weingartner | |
ok deraadt@ | |||
2008-03-22 | flag constant values should be UL, spotted by deraadt@ | Otto Moerbeek | |