summaryrefslogtreecommitdiff
path: root/sys
AgeCommit message (Collapse)Author
2006-08-19Be sure to set the mode for AHCI capable Intel SATA correctly andJonathan Gray
move things around to make ICH8 additions easier. Thanks to several people who tested various configs.
2006-08-19handle lm75a; matt@bodgit-n-scarper.comTheo de Raadt
2006-08-19tweak dma sync opsDamien Bergamini
2006-08-19move computation of mbps after checking the value of ni->ni_txrateDamien Bergamini
2006-08-19get rid of shared auth mode.Damien Bergamini
the ioctl is not supported by ifconfig and it has never worked anyway.
2006-08-19remove unused prototypes.Damien Bergamini
don't check for fatal errors on IPW_INTR_FW_INIT_DONE interrupts as it has already been check beforehand. cosmetic while i'm here.
2006-08-19o Improve 802.11 radiotap support (correct Rx antenna and Rx rate,Damien Bergamini
add short preamble flag) o Add short slot time support o Ignore parity errors interrupts (as per Linux driver) o Fix DMA sync ops o Improve async commands processing o Fix hardware WEP encryption (40/104bit keys) o Set Tx power to the maximum value for 802.11a channels too o Disable bluetooth coexistence and hardware antenna diversity as it seems to panic the firmware on some adapters o Handle beacon miss and link degradation notifications (but don't automatically roam yet) o Remove unused prototypes o Cosmetic tweaks as always
2006-08-19regenJonathan Gray
2006-08-19Add Intel ICH8/82801H devices and a few more NVIDIA MCP55 devices.Jonathan Gray
2006-08-19set the capabilities VLAN MTU flag.Brad Smith
2006-08-19set the capabilities VLAN MTU flag.Brad Smith
2006-08-18add ucycom@uhidev and ucom@ucycom on the usb machines (docs are forthcoming)Jason Wright
2006-08-18get the attach args from the right place (honestly, this "worked" on i386)Jason Wright
sparc64? not so much.
2006-08-18Don't renumber the PCI bus if we don't need to. Fixes some machines (DellMark Kettenis
PowerEdge 2900, 2950) that otherwise lock up at the end of autoconf. ok dlg@, marco@
2006-08-18probe for the lm75a, meaning that the lm75/lm75a/lm77 probe routine mustTheo de Raadt
become quite complicated. work done by matt@bodgit-n-scarper.com after i explained how daft these devices are
2006-08-18Add a new Core Xeon CPU and an older Pentium Pro model to the busDimitry Andric
clock detection. Also improve the error message in case of an unknown CPU, so we can more easily see what needs to be added. Tested by brad@ and others.
2006-08-18set of unrelated cosmetic tweaks.Damien Bergamini
2006-08-18fix a printf format stringDamien Bergamini
2006-08-18sync w/ rum(4):Damien Bergamini
- in ral_newstate(), save the "arg" parameter so we can pass it to the ieee80211_newstate() function in the usb task - merge ral_tx_data() and ral_tx_mgt()
2006-08-18- fix support for RT5225 (802.11a MIMO)Damien Bergamini
- set default Tx power for 802.11a channels - in rum_newstate(), save the "arg" parameter so we can pass it to the ieee80211_new_state() function in the usb task - merge rum_tx_data() and rum_tx_mgt() - s/le32toh/letoh32/g (le32toh is defined in usb_port.h) - cosmetic while i'm here
2006-08-18oops, debug cruft shouldnt go into the tree.David Gwynne
2006-08-18add the sysinfo struct, and then use it to get the current state of theDavid Gwynne
alarm.
2006-08-18easy bio bits first. this is is code that should enable, disable, andDavid Gwynne
silence the alarm. the hardware can also report the state of the alarm, but its embedded in a really large message im not 100% sure about yet.
2006-08-18arc, meet bio. bio, meet arc.David Gwynne
2006-08-18Make sure the PCI mode detection code is called if it hasn't been run yet.Mark Kettenis
This can happen on machines with mpbios but without pcibios like the Sun x4100 and x4200. ok dlg@
2006-08-18Shrink dmesg output.Jonathan Gray
2006-08-18ansi, no binary change.Jonathan Gray
2006-08-18check hw.max_frame_size when deciding when to use m_adj().Brad Smith
2006-08-18regenBrad Smith
2006-08-18pretty print alternate PCI id entries for a few Broadcom Gig chipsets.Brad Smith
2006-08-18fix up the arc fw message macros a bit. change a comment while here.David Gwynne
2006-08-18support for ucycom:Jason Wright
- teach ucom that not all i/o is done via bulk pipes - teach uhidev that i/o interrupt pipes are distinct
2006-08-18a bit more infrastructure for firmware commands.David Gwynne
2006-08-18Oops. If you don't use a label, remove it.Kenneth R Westerback
2006-08-17Remove the link state check from re_start() for now. Allows the 8139C+Brad Smith
based adapters to work again. Issue reported by and workaround tested by maja@
2006-08-17fix tyop.Michael Knudsen
2006-08-17remove more unused code.Brad Smith
2006-08-17remove the Yukon Lite workaround which is not being used in the msk(4) driver.Brad Smith
2006-08-17cosmetic tweaks.Brad Smith
2006-08-17remove PCI ids which msk(4) will match against from sk(4).Brad Smith
2006-08-172 more PCI ids.Brad Smith
2006-08-17Remove some #ifdef'ed out (bogus) debug code.Mark Kettenis
2006-08-17reduce the stack usage of the ioctl function by malloc/free'ing a numberTheo de Raadt
of larger structures as need be. This was one of the worst offenders in the tree.
2006-08-17remove some unused code from msk_init_yukon().Brad Smith
2006-08-17SK_DEBUG/skdebug -> MSK_DEBUG/mskdebugBrad Smith
2006-08-17refactor the promiscuous mode handling code and simplify the ioctl handler.Brad Smith
2006-08-17get rid of the last traces of ykc.Brad Smith
2006-08-17enable msk(4) in a few more places.Brad Smith
2006-08-17tsk tsk, krw did not test compile thisTheo de Raadt
2006-08-17No need for divsi and friends, yetMiod Vallat