summaryrefslogtreecommitdiff
path: root/sys
AgeCommit message (Collapse)Author
2007-03-21remove extra *p test, from charles longeauTed Unangst
ok deraadt millert
2007-03-21enable ahci(4). this only attaches to the jmicron controllers so far.David Gwynne
if anyone can quickly try this on i386 i'll enable it there too. ok deraadt@
2007-03-21replace the array of u_int8_ts for the fis/registers with a struct to makeDavid Gwynne
it a bit easier to read. there are variations on this, but they can be defined later.
2007-03-21For now, reserve one opening so we always have a CCB free to issue a softChristopher Pascoe
reset with during error recovery. Also, ensure that that CCB has been stopped on the chip before putting it back in the pool.
2007-03-20Fix crystal on/off routine (no more panic). Add two new routines toMarcus Glocker
set and clear the device's MAC filter.
2007-03-20Move macppc to __HAVE_CPUINFO, and make locore.S and trap.c suitable forMark Kettenis
MULTIPROCESSOR. From now on sprg0 holds a pointer to struct cpuinfo, which is used to spill registers to during trap instead of the globals we used to use for that purpose. Bits and pieces from NetBSD. Help from drahn@ and art@. Tested by xsa@, thib@, miod@, gwk@, deraadt@. ok drahn@, gwk@
2007-03-20swiss spellingTheo de Raadt
2007-03-20An complete lack of peer review before this is commited means it gets pulled.Theo de Raadt
No exceptions.
2007-03-20Use aml_val2int() instead of accessing v_integer directly.Michael Knudsen
`sort of ok' marco (before lock)
2007-03-20Be sure to reset ata_xfer flags for all PACKET transfers, otherwise weChristopher Pascoe
could pick up a previous ATA_F_POLL from a previous non-data command.
2007-03-20Remove unused ALIGN32 macro. It wouldn't work anyway, sinceDeanna Phillips
ALIGNBYTES32 has been gone for years. ok art
2007-03-20add missing FLUSH_CACHE commands.David Gwynne
2007-03-20Document some routines by pointing to the refering specs URL.Marcus Glocker
2007-03-20Basic FLUSH CACHE support.Christopher Pascoe
Note that the ATA spec says we're should retry after error until we see no more errors. This is not (yet) implemented.
2007-03-20Use ALLOCNOW flag when creating PRDT dmamap, otherwise it could fail duringChristopher Pascoe
error handling.
2007-03-20Tag ATAPI transfers that have no data phase correctly, otherwise the commandChristopher Pascoe
isn't sent to the device.
2007-03-20Our timeout and error handlers complete the commands for us, so we shouldChristopher Pascoe
always return ATA_COMPLETE in the polled transfer case. Also, respect the passed in timeout value when polling.
2007-03-20typo in commentTodd T. Fries
ok jmc@
2007-03-20commit the rest of the jmicron ids. jsg has been trying to get me to addDavid Gwynne
these since last year, but i didnt see the point till the code would be useful anywhere.
2007-03-20Oops, remove some unused variables and unmangle a command name.Christopher Pascoe
2007-03-20zap unused variable.Thordur I. Bjornsson
ok pedro@
2007-03-20Cap the device size we present to 2TB, just in case someone attachesChristopher Pascoe
something really big. The SCSI layer isn't yet ready for it.
2007-03-20Move common completion handling into ata_exec itself. Removes a double freeChristopher Pascoe
in the inquiry error paths, as the HBA will have already completed the ata_xfer with an error. Reminder and ok dlg@
2007-03-20Add support for ATA PACKET commands. This should make ATAPI cdrom drives,Christopher Pascoe
etc, just work.
2007-03-20Read the whole SPROM content with a single routine to a own sprom struct.Marcus Glocker
For those people who have reported about broken MAC address at attach time, this should fix the problem.
2007-03-20Catch failed commands and copy the error taskfile back to the ata_cmd,Christopher Pascoe
so that atascsi can deal with it.
2007-03-20move ata command definitions from atascsi.c to atascsi.hDavid Gwynne
2007-03-20do not use out of scope variable in macros -- only use the macro arguments ↵Michael Shalayeff
passed; makes it less of nfs kind of code; henning@ ok
2007-03-20on com_console we need a little delay to let fifo flush itself before ↵Michael Shalayeff
resetting it and stuff to avoid garbled dmesg output; found on some arm
2007-03-20missing include and also use time_uptime as art suggested; compiles nowMichael Shalayeff
2007-03-20reorder slightly. ata bits before atascsiDavid Gwynne
2007-03-20Spring cleaning: some whitespace, clean up the failure path in the attachGordon Willem Klok
routine, and check the return of the mapiodev, and dbdma_create functions. Tested on Power Macintosh 9500MP and a 9600MP. "the diff looks fine to me." dlg@
2007-03-20Add timeout handling for ATA commands.Christopher Pascoe
2007-03-20nothing from wdc, wd, or any of the existing ata stuff pls. this gets ridDavid Gwynne
of the wdcreg.h include in atascsi. "feel free to remove" pascoe@
2007-03-20Spec says we can't write anything other than the global host control registerChristopher Pascoe
before we enable AHCI, so enable it before resetting saved capabilities.
2007-03-20Minor style fixup.Christopher Pascoe
2007-03-20Request "descriptor processed" interrupts only for PIO requests (inquiry,Christopher Pascoe
etc), and request that the D2H FIS at the completion of all (DMA) commands generate an interrupt. This makes each data transfer generate one interrupt instead of two and should guarantee that the interrupt that is generated actually arrives after the command has completed.
2007-03-20Calculate the residual and copy it back to the scsi_xfer, so that RW actuallyChristopher Pascoe
works. From dlg@
2007-03-20Add support for issuing sector read/write commands.Christopher Pascoe
2007-03-20Split PRDT unload out into its own function, for symmetry.Christopher Pascoe
2007-03-20Instead of having a copy of every register that we will issue in the ata_cmd,Christopher Pascoe
simply include a pointer to the command FIS that we will issue to the device. Include another space where we can copy back an error register set from a failed command. This means that we can now build and issue arbitrary commands from atascsi, and retrieve errors back.
2007-03-20Change API for struct ata_xfer allocation to move it into the device thatChristopher Pascoe
atascsi will be driving, and add it to the AHCI CCB. This effectively gives us all the resources we need for a transfer in one hit, meaning that we don't need to worry about whether we will have a pool shortage or not enough CCBs. The SCSI mid layer should take care to never exceed the number of CCBs we have available, based on our sc_link.openings.
2007-03-20Hook up sd ioctl.Marco Peereboom
2007-03-20Fake out target id for bioc_disk.Marco Peereboom
2007-03-20Use queue.h macros instead of home made for thingy.Marco Peereboom
From tbert <bret.lambert@gmail.com>
2007-03-19Use u_int32_t instead of u_long for IP addresses.Marco Pfatschbacher
OK claudio@
2007-03-19Only call bus_dmamap_unload() if we loaded a dmamap beforehand. Found outClaudio Jeker
the hard way on sparc64. Now acx(4) no longer panics but it does not yet work. OK mglocker@
2007-03-19the autoconf glue funcs (match/attach/etc) are only used inside softraid.c,David Gwynne
so prototype them there rather than in softraidvar.h. shuffle these funcs a little bit while here to make it look more like everything else. ok marco@
2007-03-19Remove force-PIO workaround for wd@pciide.Miod Vallat
2007-03-19bus_dmamap_sync fixes to cope with real life.Miod Vallat