| Age | Commit message (Expand) | Author |
|---|
| 2010-02-12 | include devices found on fuloong: com0, re and rgephy; ok miod@ | Otto Moerbeek |
| 2010-02-12 | use early setup hook to get serial console on the fuloong; with & ok miod@ | Otto Moerbeek |
| 2010-02-12 | tftp boot paths do not start with a /; ok miod@ | Otto Moerbeek |
| 2010-02-12 | Allow for two more per-platform function pointers, one for extra setup work | Miod Vallat |
| 2010-02-12 | Switch to using mkuboot for building the U-Boot image. | Michael Knudsen |
| 2010-02-12 | Add mkuboot, a utility to build images for Das U-Boot. | Michael Knudsen |
| 2010-02-12 | Overhaul per-platform specific operation by moving all the differences into | Miod Vallat |
| 2010-02-12 | Allow more legacy interrupts to reach the legacy PIC; found the hard way by | Miod Vallat |
| 2010-02-12 | ehci bits, not enabled. | Dale Rahn |
| 2010-02-12 | Initial version of ehci shim for omap, not complete. | Dale Rahn |
| 2010-02-12 | Rework prcm to support additional iclk/fclk registers. | Dale Rahn |
| 2010-02-12 | introduce a uvm_km_valloc_try function that won't get a lower level lock | Ted Unangst |
| 2010-02-11 | Correct argument for splx() is s2 not s so that the splx() calls match to the | Claudio Jeker |
| 2010-02-11 | "unmute" GPIO 0 on all Dell machines with IDT 92HD71B7 codecs. | Jacob Meuser |
| 2010-02-11 | default to no pckbc and no legacy hardware; ok miod@ | Otto Moerbeek |
| 2010-02-11 | align comments; ok miod@ | Otto Moerbeek |
| 2010-02-11 | cd in nam2blk; ok miod | Otto Moerbeek |
| 2010-02-11 | fuloong model define | Otto Moerbeek |
| 2010-02-11 | No need for M_CANFAIL if M_NOWAIT is used. Found by Gleydson Soares. | Claudio Jeker |
| 2010-02-10 | Only allow the common voltages of the card and the host when writing the OCR | Dale Rahn |
| 2010-02-10 | remove lingering debug print. | Dale Rahn |
| 2010-02-10 | And now mounts with reads and writes work. | Dale Rahn |
| 2010-02-10 | Would seem that the sdmmc layer does not like having CRC7 as part of the | Dale Rahn |
| 2010-02-10 | check that rf reg is != 0xff, not rf val. | Damien Bergamini |
| 2010-02-10 | Blame the right interrupt bit in `spurious interrupt' messages. | Miod Vallat |
| 2010-02-10 | Close to working MMCHS (ommmc) driver. much thanks to mk@ for continual poking. | Dale Rahn |
| 2010-02-10 | Unfortunately, newer versions of u-boot found on the beagle do not allow | Dale Rahn |
| 2010-02-09 | Make the bonito_pci_attach_hook per-platform, as a new callback in struct | Miod Vallat |
| 2010-02-09 | Flush caches upon startup anyway, the gdium pmon keeps it dirty, unlike | Miod Vallat |
| 2010-02-09 | Switching the strange VIA VT8251 PCIE host bridge into a PCI-PCI bridge | Mark Kettenis |
| 2010-02-09 | Build ral firmware on loongson (for Gdium). | Miod Vallat |
| 2010-02-09 | Process kernel options correctly when run from a `go' command instead of | Miod Vallat |
| 2010-02-09 | Less aggressive cache ops on BUS_DMASYNC_PREREAD alone (leftover from older | Miod Vallat |
| 2010-02-09 | wsmux (for external, big-boned-fingers compatible, keyboards) and ext2fs | Miod Vallat |
| 2010-02-09 | Set the rtm_priority when sending RTM_ADD/RTM_DELETE messages out in | Claudio Jeker |
| 2010-02-09 | Correctly track RTF_UP on RTM_CHANGE. Since the interface can change | Claudio Jeker |
| 2010-02-09 | Before cloning a route to change the MTU check that the route we clone from | Claudio Jeker |
| 2010-02-09 | Add 10GSFP+Cu to the Ethernet media types. This is for 10G direct attached | Claudio Jeker |
| 2010-02-09 | - add the whole gang of USB devices; as prompted by deraadt@ | Jasper Lievisse Adriaanse |
| 2010-02-09 | Fix off-by-one system control register defines, makes 2D acceleration on | Miod Vallat |
| 2010-02-09 | XY Failure reads no longer require temp buffer or WUF_FAIL | Jordan Hargrave |
| 2010-02-08 | Use character raw device to read disklabel during bootprobe, as all | Kenneth R Westerback |
| 2010-02-08 | Add ZTE K3565-Z USB MSM modem. | Marco Pfatschbacher |
| 2010-02-08 | sync | Marco Pfatschbacher |
| 2010-02-08 | Add ZTE K3565-Z USB MSM modem. | Marco Pfatschbacher |
| 2010-02-08 | remove redundant bits. | Damien Bergamini |
| 2010-02-08 | final bits for RT3572 and some fixes for RT3070 and RT3071. | Damien Bergamini |
| 2010-02-08 | Add ral(4), found on the Gdium Liberty 1000. | Miod Vallat |
| 2010-02-08 | Minimal completion support for .l.s and .l.d routines, necessary for at | Miod Vallat |
| 2010-02-08 | add the 10us sifs directly to the pre-computed ack durations. | Damien Bergamini |
