summaryrefslogtreecommitdiff
path: root/sys
AgeCommit message (Expand)Author
2007-09-09Add a few missing bits to include/cpu.h required for MULTIPROCESSOR kernels.Mark Kettenis
2007-09-09Make fpproc per-cpu. This turns fpproc into a macro, so adjust fpu/fpu.cMark Kettenis
2007-09-09Only clear the message header if it is called from a sysctl walk. ThisClaudio Jeker
2007-09-09Disable page zeroing in the idle loop, as it blasts the entire cache.Miod Vallat
2007-09-09Remove some more goo left over from sparc.Mark Kettenis
2007-09-09Make handled_intr_level per-cpu.Mark Kettenis
2007-09-09Properly prefix all functions with driver name.Jonathan Gray
2007-09-09don't try to set the recording gain or balance through /dev/audio[ctl]Jacob Meuser
2007-09-09tmhc has only been seen on i386Theo de Raadt
2007-09-09uchcom(4) has been verified to work by djm@, so add it to allJonathan Gray
2007-09-09more M_ZERO conversions; ok krw@.Federico G. Schwindt
2007-09-09new driver for TI tmhc50 / adm1022 / adm1028; checked by kettenisTheo de Raadt
2007-09-08Case ranges e.g. case 'A' ... 'Z': are a gcc-ism not valid C. Fix these, andGordon Willem Klok
2007-09-08regenFelix Kronlage
2007-09-08device id for the Huaweil Mobile E220Felix Kronlage
2007-09-08more M_ZERO changesGilles Chehade
2007-09-08Add prom functions to start secondary CPUs.Mark Kettenis
2007-09-08fix uaudio(4) devices using signed mixer controlsAlexandre Ratchov
2007-09-08Make the ast on sparc64 per-process instead of global. Necessary to makeMark Kettenis
2007-09-08Clear the message header (and only the message header) in rt_msg2.Claudio Jeker
2007-09-08use M_ZERO.Martin Reindl
2007-09-08use M_ZERO.Martin Reindl
2007-09-08Add adl(4). Make comments for i2c devices a bit more consistent while I'mMark Kettenis
2007-09-08Wrap DPRINTFN() macro up in do { } while(0).Jonathan Gray
2007-09-08Add nvram external hw config defines. ok marco@David Collins
2007-09-08Set external hw config according to nvram value.David Collins
2007-09-08we dont need net/rndvar.h since the code that used it has been moved toDavid Gwynne
2007-09-08Driver for WinChipHead CH341/340 USB serial adapters.Jonathan Gray
2007-09-08Sync description of lookup() a bit more to reality.Hans-Joerg Hoexer
2007-09-07missing scale factor; from Mike BelopuhovTheo de Raadt
2007-09-07Do not recalculate TCP payload length in pf_test_rule() as it hasAlexander Bluhm
2007-09-07use new malloc M_ZERO flag + replace MALLOC with mallocDamien Bergamini
2007-09-07properly acknowledge interrupts. this fixes the interrupts storm i wasDamien Bergamini
2007-09-07Fix code that figures out the PCI bus number for a _PRT configuration object.Mark Kettenis
2007-09-07make sure the length of the first segment of a Tx descriptor is a multipleDamien Bergamini
2007-09-07Enter adl(4), a driver for the Andigilog aSC7621 written by Mike Belopuhov.Mark Kettenis
2007-09-07use new malloc M_ZERO flag to shrink kernel.Damien Bergamini
2007-09-07sprinkle some M_ZERO love.Federico G. Schwindt
2007-09-07The obvious bzero/memset -> M_ZERO changes.Kenneth R Westerback
2007-09-07The obvious bzero/memset -> M_ZERO changes.Kenneth R Westerback
2007-09-07The obvious bzero/memset -> M_ZERO changes.Kenneth R Westerback
2007-09-07The obvious bzero/memset -> M_ZERO changes.Kenneth R Westerback
2007-09-07Use M_ZERO in a few more places to shave bytes from the kernel.Artur Grabowski
2007-09-07take advantage of the new M_ZERO malloc flag.David Gwynne
2007-09-07Check if rtm_hdrlen is smaller then the passed message or it would be possibleClaudio Jeker
2007-09-07use M_ZEROReyk Floeter
2007-09-07use M_ZEROReyk Floeter
2007-09-07Add the long requested M_ZERO flag to malloc(9).Artur Grabowski
2007-09-07Comment fix. It's 0x7F ELF, not 0xFF ELF.Tobias Weingartner
2007-09-07Remove some left-overs from the TSC based microtime. We don't needArtur Grabowski