summaryrefslogtreecommitdiff
path: root/sys
AgeCommit message (Collapse)Author
2005-02-21remove unused headerDavid Gwynne
2005-02-21define AHC_ALLOW_MEMIO on macppc, resulting in support for moreMartin Reindl
controllers and better performance ok drahn@, krw@
2005-02-20A better console test.Miod Vallat
2005-02-20overhaul macrom code from NetBSD:Martin Reindl
- simplify the asm constraints in mrg_aline_super() - generate a SIGILL for user-mode A-line traps - cleanup, KNF, whitespace nitpicking and minor other updates ok miod@
2005-02-20Avoid use after free when purging states.Ryan Thomas McBride
ok henning@ dhartmei@ claudio@
2005-02-20Feature-sync boot() with other platforms:Miod Vallat
- run shutdown hooks. - do not turn reboot into halt if cold and invoked from ddb. ok deraadt@
2005-02-20Do not confuse syslog by printing messages starting with '<'.Miod Vallat
ok krw@
2005-02-20Do not pass 68060-specific compiler flags anymore.Miod Vallat
2005-02-20Link uboot with libgcc for quad arithmetic now that gcc won't emit theseMiod Vallat
instructions natively.
2005-02-20ifmedia_set() should not panic, nor can it really fail. So if there isBrad Smith
some problem setting the media to the requested value (usually IFM_AUTO), we now force the media selection to IFM_NONE. From NetBSD
2005-02-20Don't calculate 'total_len' twice.Brad Smith
Inspired by NetBSD' rtk(4) driver. From: Mike Pechkin <mpech at mail dot ru>
2005-02-19regenMatthieu Herrb
2005-02-19Add getdents() emulation. Makes Veritas NetBackup client for FreeBSD work.Matthieu Herrb
ok deraadt@, tedu@.
2005-02-19spelling in commentJolan Luff
2005-02-19double default MAX_KMAPENT to 2000, theo okHenning Brauer
everybody please update your trees and test this, we need to find out wether there is bad side-effects from the doubling. If this does not get enough testing by our user community we will play safe and revert this for the 3.7 release, so please test.
2005-02-19return on invalid beacon stateReyk Floeter
2005-02-19add support for the atheros ar5212 wireless chipsets. it is notReyk Floeter
finished yet and still misses some channel initialization and calibration bits. (if you want to hand in your dmesg output, please build a kernel with an uncommented COUNTRYCODE in line 109 of dev/ic/ar5xxx.c to get the value stored in your card's eeprom.) ok henning@
2005-02-19Added support for Intel PRO/Wireless 2225BG PCI adapters.Damien Bergamini
2005-02-19regenDamien Bergamini
2005-02-19Intel PRO/Wireless 2225BG PCI (iwi).Damien Bergamini
2005-02-19fix setting of the MAC address.Damien Bergamini
2005-02-19fix dmesg output. pointed out by jsg@Damien Bergamini
2005-02-19fix attachment process and dmesg output. do some indent while i'm here.Damien Bergamini
pointed out by jsg@
2005-02-19fix dmesg output.Damien Bergamini
2005-02-19do not transmit any data frame if there is not at least two free descriptorsDamien Bergamini
in the tx ring (CTS/RTS frame + data frame).
2005-02-19cosmetic tweaks.Damien Bergamini
2005-02-19make dhclient work.Damien Bergamini
2005-02-19use mii_phy_match()Brad Smith
2005-02-19regenBrad Smith
2005-02-19add a placeholder for an unknown Agere 10/100 PHY found with quad port hme'sBrad Smith
and on-board Netra T1 105's, etc.
2005-02-19From part of NetBSD rtw.c rev 1.42:Jonathan Gray
log message: Program the LEDs based on operating state and packet activity. * On a Revision F RTL8180, blink LED1 at 1Hz to indicate scan/authenticate/associate states. In the run state, turn LED1 on. In every state, blink LED1 at 5Hz to indicate non-beacon tx/rx activity. I would like to use two LEDs, but in all my Rev. F instances, LED0 is not wired to an LED; instead, the first LED is wired to indicate that the card's power is on. * On a Revision D RTL8180, program the LEDs so that LED0 indicates Tx, and LED1 indicates Rx. The Rx LED will blink annoyingly if there are beacons in the air, but at least the Tx LED is useful. * Store the hardware revision in the softc to support my futile attempt at programming LEDs for both Rev. D and Rev. F parts; I never did get Rev. D LEDs to work right. * Add a debug flag RTW_DEBUG_LED for the LED transitions.
2005-02-19add dc@cardbusBrad Smith
2005-02-19set the gpios in the right placeDavid Gwynne
ok drahn@
2005-02-18do not enable debug messages by default.Damien Bergamini
2005-02-18reset the interface on tx timeouts.Damien Bergamini
2005-02-18make sure bpfilter.h is included before including ralvar.h.Damien Bergamini
2005-02-18make sure bpfilter.h is included before including ralvar.h. fixes a panicDamien Bergamini
in if_ral_cardbus.c.
2005-02-18remove all the cruft i had in there while trying to figure this stuff outDavid Gwynne
ok drahn@
2005-02-18enable pxaudc. clean up the ohci line in the RAMDISK while im hereDavid Gwynne
ok drahn@
2005-02-18fix zlib's homepage; ok henning@, jmc@Robert Nagy
2005-02-18Internal wireless on PCChips A535 laptop found in a dmesg fromJonathan Gray
Fabio Olive Leite <foleite at yahoo dot com dot br> and some additional wi devices found in linux-wlan driver.
2005-02-18regenJonathan Gray
2005-02-18Internal wireless on PCChips A535 laptop found in a dmesg fromJonathan Gray
Fabio Olive Leite <foleite at yahoo dot com dot br> and some additional wi devices found in linux-wlan driver.
2005-02-17a new year and a new, less restrictive license. because it has to beReyk Floeter
free. go ahead miod@
2005-02-17== has a higher priority than &, so put braces wherever necessary; from cloder@Miod Vallat
2005-02-17knfReyk Floeter
2005-02-17How he wanted it work, from/ok miod@Dale Rahn
2005-02-17untested, no ok, and it broke. revert.Dale Rahn
2005-02-17whitespace nitDavid Gwynne
ok drahn@
2005-02-17cosmetic changes, fix regdomain code and beacon handlingReyk Floeter