summaryrefslogtreecommitdiff
path: root/sys
AgeCommit message (Collapse)Author
2002-04-16- Don't bother checking to see if the prom has already mapped thisJason Wright
- a bunch of KNF
2002-04-16Move the stage2 boot block load address higher, so that it can loadMiod Vallat
kernel larger than 4MB correctly again, and still work on 8MB boards.
2002-04-16Using a dull device to probe the FPU is ridiculous, replace it with an earlyMiod Vallat
initialization. While there, rework the cpu_model string creation so that it gets a more useful content.
2002-04-16From NetBSD:Todd C. Miller
o Fix m->m_data alignment in wi_rxeof() o Add a comment
2002-04-15Add Siemens/Efficient Networks SpeedStream 1023 Wireless PCI Adapter,Todd C. Miller
another PLX card. From FreeBSD.
2002-04-15regen with SpeedStream 1023Todd C. Miller
2002-04-15SpeedStream 1023 Wireless PCI Adapter (PLX-based)Todd C. Miller
2002-04-15Remove bogus casts to int in printf that causes a warning on 64bit arches.Todd C. Miller
2002-04-15Since XFree doesn't try to remap things behind our backs anymore, simplifyJason Wright
the driver a bit (mainly don't reprobe the pci address for every call to vgafb_mmap()).
2002-04-153.1-currentTheo de Raadt
2002-04-15wx is totally gone nowTheo de Raadt
2002-04-14gx, not wx, you fool. spotted by miodTheo de Raadt
2002-04-13Try MUCH harder to always print a "root on" lineTheo de Raadt
2002-04-11Back out nfs_realign() change, it causes "pool_get: must have NOWAIT" panics.Todd C. Miller
deraadt@ OK
2002-04-11o Check supported speeds before examing capabiltiesTodd C. Miller
o If capinfo doesn't match, save it anyway for debugging porpoises o Add more info for capinfo failures in debug mode
2002-04-11Make sure this always prints the 'root on' line. Also, treat ramdisksJason Wright
as disks in a few other places so that autoconf doesn't complain: 'use one of: ...' when rd0 is wired as root.
2002-04-11bye bye betaTheo de Raadt
2002-04-11Fix Lucent <-> Prism2 WEP interop bug. We only want to set theTodd C. Miller
EXCLUDE_UNENCRYPTED bit in the WI_RID_P2_ENCRYPTION value if we are in shared key mode. Symbol cards, just to be different, supposedly always want the EXCLUDE_UNENCRYPTED bit set (confirmed with the Linux orinoco and spectrum24 drivers). I have so far been unable to get my Symbol card to interop with Lucent or Prism2 WEP. In BSS mode at least, this Symbol card does not list WEP as a capability it supports. This is, to put it mildly, rather annoying.
2002-04-11o Set feature flags based on firmware type and version.Todd C. Miller
o Move the sc->has_wep flag into sc->wi_flags o Only do the COR reset on Symbol cards just to play it safe. o Remove unused sc->sc_enabled variable. o Kill ibss_portmap array in favor of sc->wi_ibss_port, which is stored in little endian. mickey@ OK
2002-04-10o Add ibss and ibss-master mediaopt for ifconfigTodd C. Miller
o Map port type 4 to ibss regardless of firmware type. This gives us a consistent way to set ibss mode.
2002-04-10For PLX cards move CIS handling to be earlierTodd C. Miller
2002-04-10nfs_realign from FreeBSD. The old code was over-optimized, occasionally ↵Constantine Sapuntzakis
overwriting other parts of a TCP stream, occasionally dereferencing NULL pointers
2002-04-10Handle all pending adb interrupts when searching for devices.Dale Rahn
Adjust delays in the probe code. ok miod, matthieu, lebel, brad.
2002-04-10don't attach to system processes.Federico G. Schwindt
art@ niklas@ markus@ millert@ deraadt@ ok.
2002-04-10Be sure to print 'root on' line for RAMDISK kernelsJason Wright
2002-04-10remove ahc from here againTheo de Raadt
2002-04-09because SUNW,fas boards don't have a corresponding 'dma' device, searchingJason Wright
for the corresponding 'dma' for a non-fas 'esp' needs to have an offset (really a count of the number of 'fas's)
2002-04-09better lt keymap (in the best .su tradition); from Vladis Adler <vld@vic.lt>Michael Shalayeff
2002-04-09Don't enable interrupts until an open() is done. Until then the driverPer Fogelstrom
is not handling them and may throw the kernel into a spurious interrupt loop. ok art@
2002-04-09No longer need memsize.Todd C. Miller
2002-04-08Make fiber cards work (3com 3c996-SX)Nathan Binkert
Make the BCM5701 chips work. (3com 3c996B-T) From FreeBSD
2002-04-08Match on phy model found internally on the BCM5701 chips (3c996B-T)Nathan Binkert
2002-04-08syncNathan Binkert
2002-04-08new brgphy modelNathan Binkert
2002-04-08two missing splx()sMichael Shalayeff
2002-04-08restore what was a default inactivity timeout, two minutesMichael Shalayeff
2002-04-08make hostap work on other-endian machines; tested by drahn@Michael Shalayeff
2002-04-08Credit DARPA/USAF appropriately.Jason Wright
2002-04-08wi* at pci* works with PLX pci adapters.Dale Rahn
Note: true pcmcia bridges are not currently supported.
2002-04-08tag repairTheo de Raadt
2002-04-08pieces for gdb; deraadt@ okFederico G. Schwindt
2002-04-08add ESS Allegro-1 and Maestro-3 driverMike Frantzen
2002-04-08regenMike Frantzen
2002-04-08ESS Alegro-1 and Maestro 3 stuffMike Frantzen
2002-04-08add an entry for the MAESTRO_3 audio accelerator. it improves your bandwidthMike Frantzen
almost as much as an openbsd sticker!
2002-04-08Allegro-1 and Maestro 3 driver ported from netbsdMike Frantzen
ok deraadt@
2002-04-08add flag to swap channels. from netbsd.Mike Frantzen
ok deraadt@
2002-04-07Don't reset COR in wi_reset(), break it out into its own function andTodd C. Miller
only call it from wi_attach() and wi_pcmcia_activate() (ie: just once). It would be nicer to have the COR reset be part of the bus-specific code but we need to know whether or not we have a Lucent card since old Lucent firmware revs get messed up on a COR soft reset. Even with the COR reset we still need to avoid initializing Symbol cards more than once. However, we *do* want to do a reset after returning from suspend. Therefore, rename wi_gone to wi_flags and store both the attach and init status in it. wi_reset() now checks wi_flags to see if the card should be initialized in the Symbol case. Info on initializing Symbol cards once from NetBSD.
2002-04-07Typo. ok millert@Thierry Deval
2002-04-06Add support for setting antenna diversity on Symbol cards.Todd C. Miller
Also add some more Symbol-specific RID values I noticed in the Linux orinoco driver.
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-24 15:08:09 +0000