summaryrefslogtreecommitdiff
path: root/sys
AgeCommit message (Collapse)Author
2008-05-27Don't print SCSI ID, it's redundant now that scsibus(4) prints the sameMark Kettenis
information.
2008-05-27be much more clear about revarp failures; ok miodTheo de Raadt
2008-05-27Add ZyXEL G-202, which was already in usbdevs.Jonathan Gray
From/tested by pedro@am-gen.org
2008-05-26do not muck with the mountroot variable, since setroot() uses the state ofTheo de Raadt
it and rootdev to determine whether it is booting 'generic', 'nfs', or from a specified disk partition ok krw
2008-05-26Fix typo, such that this actually compiles.Mark Kettenis
2008-05-26Count outbound packets.Brad Smith
ok kettenis@
2008-05-26Make bringing the interface down work properly (includes a line stolenMark Kettenis
from a diff by brad@).
2008-05-26Make sure we build man pages on stand/ on all architectures.Mark Kettenis
2008-05-26Print SCSI initiator ID such that it is easier to spot configurationMark Kettenis
problems. ok krw@, marco@, deraadt@
2008-05-26Add more ioctl's (still unfinished); VIDIOC_ENUM_FMT, VIDIOC_ENUMINPUT,Marcus Glocker
VIDIOC_S_INPUT, VIDIOC_TRY_FMT. Allows me at least to use a small V4L2 compatible webcam application to capture some images.
2008-05-26On sparc64, fetch "scsi-initiator-id" property from the firmware, and useMark Kettenis
it to tweak to SPI port configuration. Makes the PRIMEPOWER 250 happy when netbooting.
2008-05-26Add tsec(4) on RAMDISK kernels (and make a comment in GENERIC a bit moreMark Kettenis
consistent).
2008-05-26Limit to 80 char width and tweak comments for readability.Jonathan Gray
2008-05-26Properly handle usbd_get_interface_descriptor() returning NULL.Jonathan Gray
From Jacek Masiulaniec <jacekm@dobremiasto.net>
2008-05-26- also zap userldt hereJasper Lievisse Adriaanse
from travers buda, via deraadt@
2008-05-26Enable cmpci(4) and eso(4).Brad Smith
ok jakemsr@
2008-05-26Count output packets.Brad Smith
From DragonFly ok dlg@
2008-05-25use ac97 default parameters for auich(4), auixp(4) and auvia(4).Jacob Meuser
they may have codecs which only handle 48kHz sampling rates. ok ratchov@
2008-05-25add a function to get default parameters for ac97 codecs. all ac97Jacob Meuser
codecs support 16-bit stereo slinear_le @ 48kHz. ok ratchov@
2008-05-25tweak the SPI port configuration if we figure out that it is not quiteDavid Gwynne
right, in particular the adapters scsi id on the bus. requested by kettenis@ who is having trouble with the scsi controller on the primepower 250.
2008-05-25Don't define EHCI_DEBUG when USB_DEBUG is defined. This to be consistentMarc Balmer
with other USB host controller interfaces. From Karl Sjodahl <dunceor@gmail.com>; ok jsg
2008-05-25need to declare struct proct before using a pointer to it; ok kettenis thibTheo de Raadt
2008-05-25Don't forget to actually return a value in ttyname(), and fix a bunch ofMiod Vallat
warnings while there.
2008-05-25Specify the PHY to be used in the kernel config instead of hardcoding itMark Kettenis
int tsec(4).
2008-05-25Default to full-duplex MII mode such that a directly connected integratedMark Kettenis
switch has a chance to work. Don't call into the mii layer if no PHYs were attached. Makes the integrated switch on the Thecus N1200 visible to the CPU.
2008-05-25Fix typo; makes TSEC2 actually get Rx interrupts.Mark Kettenis
2008-05-25Move cmpci(4) and eso(4) out of the untested section.Brad Smith
ok jakemsr@
2008-05-25Enable emu(4).Brad Smith
ok jakemsr@
2008-05-25Spacing. Comments. strncpy() -> strlcpy().Marcus Glocker
2008-05-25Nuke a couple of unused variables (booted_device, booted_partition).Kenneth R Westerback
ok weingart@ deraadt@
2008-05-25Remove redundant enabling of bus master which pci_mapreg_map() dealsBrad Smith
with. ok dlg@
2008-05-25Remove redundant enabling of memory space and bus master whichBrad Smith
pci_mapreg_map() deals with. ok jakemsr@
2008-05-24Found some documentation that suggests that CMU-CH doesn't have an IOMMU andMark Kettenis
streaming cache, so don't try to initialize it.
2008-05-24Add Psycho variants found on the SPARC Enterprise M4000/M5000/M8000/M9000.Mark Kettenis
2008-05-24Add a quirk to prevent this LCD device from attaching as a HID. This is aChris Kuethe
not somewhere we want to go in the long term - adding a quirk for every device out there that does something a little funky. It would be better if devices that claimed they are HIDs actually acted like it. Failing that, passing usb commands though uhid would be nice.
2008-05-24Treat SPARC64-VI and SPARC64-VII similar to SPARC64-V, and move theMark Kettenis
UltraSPARC-III fixup code into bootstrap() too.
2008-05-24Add VER.impl values for Fujitsu CPUs.Mark Kettenis
2008-05-24Remove {tcp/udp}6_usrreq(); Since the normal ones nowThordur I. Bjornsson
take a proc argument, theres no need for these, since they are just wrappers. OK claudio@
2008-05-24- Enable userland to read(2) video stream from /dev/video.Marcus Glocker
- Prepare for mmap(2).
2008-05-24SDEV_UMASS devices skip the mode page dance to set blksize. So initializeKenneth R Westerback
blksize to 0 to avoid confusing garbage values with useful info. Noticed by jolan@.
2008-05-24Attach to "FJSV,su", which is the name used for serial ports on the SPARCMark Kettenis
Enterprise M4000/M5000/M8000/M9000.
2008-05-24iLet's see if this also works for Oberon (the PCIe bridge found on the SPARC ↵Mark Kettenis
Enterprise M4000/M5000/M8000/M9000).
2008-05-24Strip off Ethernet CRC; makes dhclient shut up.Mark Kettenis
2008-05-24Increase the number of segments in a dma map to make sure a packet fits.Mark Kettenis
2008-05-24Use MAC address passed by the firmware.Mark Kettenis
2008-05-24Configure the media when brining up an interface.Mark Kettenis
2008-05-24Sync the ATI IXP200 PCI id.Brad Smith
2008-05-24regenBrad Smith
2008-05-24Tweak some of the existing ATI IXP entries for more consistentBrad Smith
naming and add some missing IXP300 entries.
2008-05-24regenBrad Smith
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-01 23:12:18 +0000