summaryrefslogtreecommitdiff
path: root/sys
AgeCommit message (Collapse)Author
2006-03-04Better names for turbochannel event counters.Miod Vallat
2006-03-04Dead meat.Miod Vallat
2006-03-04Re-enable I2C_VERBOSE.Mark Kettenis
2006-03-04-current, not -beta.Alexander Yurchenko
2006-03-04<sparc64/dev/upavar.h> is unused except for struct upa_reg for autoconf, soMiod Vallat
move it to <machine/autoconf.h>.
2006-03-04creator needs rasops32 only, and vgafb never needs rasops24.Miod Vallat
2006-03-04Properly display underlined space characters.Miod Vallat
2006-03-04Set up a ``different shades of gray'' palette at 2bpp, this gives usMiod Vallat
highlighting.
2006-03-04Remove traditional coredump support since all our platforms have properMiod Vallat
cpu_coredump() behaviour.
2006-03-04Do not deliver SIGBUS twice.Miod Vallat
2006-03-04Do not enable the Ethernet@WireSpeed PHY feature on 5705's and not 5750'sBrad Smith
as the comment says.
2006-03-04don't permanently disable temperature sensors when they fail a read,Damien Miller
just mark it as invalid
2006-03-04Add the gasio magic to slow/speed cpu.Marco Peereboom
2006-03-04add art(4) here.Brad Smith
2006-03-04add PCI sub-ids for ACER, FSC, Intel and NEC products.Brad Smith
ok marco@ dlg@
2006-03-04Add support for Socket CF 10/100.Jonathan Gray
From Andrew Smith <asmith at tranquility.fsbusiness.co.uk>.
2006-03-04regenJonathan Gray
2006-03-04Add Socket CF 10/100.Jonathan Gray
from Andrew Smith <asmith at tranquility.fsbusiness.co.uk>
2006-03-04remove the colon between "address" and the MAC address.Brad Smith
2006-03-04remove the colon between "address" and the MAC address.Brad Smith
2006-03-04regenBrad Smith
2006-03-04add the National Semiconductor DP83847 DsPHYTER PHY.Brad Smith
From NetBSD
2006-03-04some defines for PHY detection.Brad Smith
From FreeBSD
2006-03-04do not set the chip type in re_attach_common() as this is alreadyBrad Smith
set in the appropriate bus-dependent front-end attach routines.
2006-03-04remove vlan header.Brad Smith
2006-03-04- Use sc->sc_dev.dv_xname everywhere.Brad Smith
- Always set IFCAP_VLAN_MTU. - Remove some printf's from the error paths in vic_alloc_mbuf(). - Move the device struct up to the top of the softc struct so the driver will actually attach.. sometimes, still issues to resolve.
2006-03-04handle lm96000 (another similar chip); ok kettenis, tested by ↵Theo de Raadt
stu@spacehopper.org
2006-03-04move to 3.9-currentTheo de Raadt
2006-03-02Put the PHY update/reset call in nfe_init back to the spot it was atJonathan Gray
before Rx/Tx/Interrupts are enabled. This makes <fredd at cse.sc.edu>'s nfe+icsphy setup work again. Tested on nfe+eephy by otto@ and myself, nfe+ciphy by otto@ and nfe+rlphy by wilfried@ ok deraadt@
2006-03-01from mickey, like on i386:Theo de Raadt
prioritise <16m memory for isa bus_dma'ble memorble memory allocations why? this is now needed because the nvidia ethernet running with jumbo frames is allocating much more memory, and was robbing isadma of bounce buffers.
2006-02-28Add smu(4) such that we can read the clock on G5 machines.Mark Kettenis
ok deraadt@
2006-02-28Shrink NKMEMPAGES_MAX back to 4MB for 3.9, as this still has issues on >= 512MBMiod Vallat
machines; this will be fixed post release. Reported by Serge Basterot. ok deraadt@
2006-02-28Announce compatibility with MacRISC4, to be able to boot automatically onMark Kettenis
G5 systems. ok drahn@, deraadt@
2006-02-28Remove a debug printf that crept into the last commit.Jonathan Gray
ok deraadt@
2006-02-28We need to special case ciphy to ask for RGMII interface at 2.5V for nfe.Jonathan Gray
This makes Cicada/Vitesse PHYs attached to nfe work. Many thanks to Bill Paul for diagnosing the problem and suggesting a solution. Tested by otto@, ok deraadt@
2006-02-28Switch to software WEP in a way mostly similiar to what David YoungJonathan Gray
did in NetBSD. Fixes WEP on aanriot@'s ADM8211A. ok deraadt@
2006-02-27Do not stupidly panic but return ENOTCONN when trying to pass fds on anMiod Vallat
unconnected socket; reported by Christian Biere <christianbiere at gmx dot de> ok claudio@ deraadt@
2006-02-27mips requires strict alignment; spotted after a discussion on undeadly;Miod Vallat
ok deraadt@ kettenis@
2006-02-27add missing break; now filters containing a division can passOtto Moerbeek
validation; from NetBSD; ok deraadt@
2006-02-27Add the 770 model. From NetBSD through Gregory SteuckMarco Peereboom
<greg at y2006 dot nest dot cx> Suggestions and ok deraadt@ ok mbalmer@
2006-02-27Increase delay value, fixes pr5018.Alexander Yurchenko
With a help from kettenis@, ok deraadt@.
2006-02-27Add 2 additional CPUs and uncomment a 3rd. Based on this intel doc:Marco Peereboom
download.intel.com/design/mobile/datashts/30218908.pdf cpu_id part of the diff was done by Dimitry Andric <dimitry at andric dot com> Thanks :-) Pointed to the doc and ok deraadt@
2006-02-27Workaround for bridge attachment where nothing lives behind these 'rare'Dale Rahn
bridges and attaching them causes the machine to hang. A better fix needs to be found after release. ok brad@ kettenis@ deraadt@
2006-02-27stop being -betaTheo de Raadt
2006-02-27When checking syscall numbers, qualify the test with the emulation as well.Niklas Hallqvist
fixes potential panics on emulated binaries. ok deraadt@
2006-02-26Provide a buffer large enough for its contents in pal_opname(). ok deraadt@Miod Vallat
2006-02-26skip common macfb attachment on unknown cardsMartin Reindl
ok miod@ deraadt@
2006-02-26Disable alipm(4) on sparc64 if not running at the recommended 74KHz clock, toMark Kettenis
avoid data_access_error exceptions. ok deraadt@
2006-02-26if ipmi is on the machine: instead of (confusingly) failing in match,Theo de Raadt
bail out in attach, and also say why; ok marco
2006-02-26use sc->sc_dev.dv_xname consistently.Damien Bergamini