Age | Commit message (Expand) | Author |
2006-02-27 | Add the 770 model. From NetBSD through Gregory Steuck | Marco Peereboom |
2006-02-27 | Increase delay value, fixes pr5018. | Alexander Yurchenko |
2006-02-27 | Add 2 additional CPUs and uncomment a 3rd. Based on this intel doc: | Marco Peereboom |
2006-02-27 | Workaround for bridge attachment where nothing lives behind these 'rare' | Dale Rahn |
2006-02-27 | stop being -beta | Theo de Raadt |
2006-02-27 | When checking syscall numbers, qualify the test with the emulation as well. | Niklas Hallqvist |
2006-02-26 | Provide a buffer large enough for its contents in pal_opname(). ok deraadt@ | Miod Vallat |
2006-02-26 | skip common macfb attachment on unknown cards | Martin Reindl |
2006-02-26 | Disable alipm(4) on sparc64 if not running at the recommended 74KHz clock, to | Mark Kettenis |
2006-02-26 | if ipmi is on the machine: instead of (confusingly) failing in match, | Theo de Raadt |
2006-02-26 | use sc->sc_dev.dv_xname consistently. | Damien Bergamini |
2006-02-26 | prettify + u_int{8,16,32}_t -> uint{8,16,32}_t | Damien Bergamini |
2006-02-26 | Don't touch i2c bus tag internals directly. | Alexander Yurchenko |
2006-02-26 | unbreak tcp window update (restore 4.4lite code); netbsd pr 13952; | Markus Friedl |
2006-02-26 | Print _PCT & _PPC. | Marco Peereboom |
2006-02-26 | regen | Brad Smith |
2006-02-26 | fix some of the ATI names. | Brad Smith |
2006-02-26 | Add GRD and PCT structures. | Marco Peereboom |
2006-02-26 | Let if_nfe.c compile again by putting declaration of ifp inside #ifdef | Kenneth R Westerback |
2006-02-26 | Don't define NFE_DEBUG by default. | Jonathan Gray |
2006-02-26 | Print only MHz. Idea from jsg@ | Marco Peereboom |
2006-02-26 | Delete some debug printing that wasn't compiling. | Marco Peereboom |
2006-02-26 | Print ACPI cpu name during dmesg as well. | Marco Peereboom |
2006-02-26 | Add acpicpu as a device. | Marco Peereboom |
2006-02-26 | Print core frequency and power usage during dmesg. | Marco Peereboom |
2006-02-26 | clean up if there is a failure to attach. | Brad Smith |
2006-02-26 | Add acpicpu device. Remains disabled. | Marco Peereboom |
2006-02-26 | Add _PSS. | Marco Peereboom |
2006-02-26 | store the shutdown hook pointer in the softc struct. | Brad Smith |
2006-02-26 | vic(4) is PCI only so make it look like a typical PCI only driver. | Brad Smith |
2006-02-26 | - set baud rate in ixgb_update_link_status(). | Brad Smith |
2006-02-25 | add vic(4) config glue. The driver is not yet enabled. | Reyk Floeter |
2006-02-25 | Add vic(4), a driver for the VMware vmxnet network interface. This is | Reyk Floeter |
2006-02-25 | Put quotation marks around names of unconfigured devices. | Mark Kettenis |
2006-02-25 | Ugh, missed some { } | Marco Peereboom |
2006-02-25 | Make sure we print something for unidentified devices. | Mark Kettenis |
2006-02-25 | #undef I2C_VERBOSE; re-enable after release. | Mark Kettenis |
2006-02-25 | Put quotation marks around names of unconfigured devices. | Mark Kettenis |
2006-02-25 | sync | Damien Bergamini |
2006-02-25 | ids for intel pro/wireless 3945ABG | Damien Bergamini |
2006-02-25 | initialize rv to zero avoiding match on whatever is just next on the bus | Martin Reindl |
2006-02-25 | comment code that is currently unused (radar detection and dynamic rx | Damien Bergamini |
2006-02-25 | instead of panicing when tx rate is zero, fallback to 1Mbps. | Damien Bergamini |
2006-02-25 | load the firmware only when necessary (first call to rt2661_init or if the | Damien Bergamini |
2006-02-25 | ok, the miod thing can go back in, tree builds | Theo de Raadt |
2006-02-24 | Make the "ring buffer overrun" message a DEBUG message instead | Brad Smith |
2006-02-24 | Make ServerWorks SATA less chatty. Sprinkle some KNF while I'm there. | Mark Kettenis |
2006-02-24 | Another gem from the the-world-runs-on-i386 departement. Using u_long in | Claudio Jeker |
2006-02-24 | Extend temperature lookup table for a wider range and provide a | Alexander Yurchenko |
2006-02-24 | update link status here. | Brad Smith |