src - OpenBSD base system

Age	Commit message (Expand)	Author
2010-09-20	Get rid of evcount's support for arranging counters in a tree	Matthew Dempsky
2010-09-20	Initial revision	Takuya ASADA
2010-09-20	Initial revision	Takuya ASADA
2010-09-20	Use SSD_ERRCODE_CURRENT instead of magic 0x70.	Kenneth R Westerback
2010-09-20	define and use macros for looking at ncq bits.	David Gwynne
2010-09-20	bus_dmamap_sync was using xs->flags to determine which direction	David Gwynne
2010-09-20	Fix unitialised variable access in the suspend/resume case	Jonathan Gray
2010-09-20	bufq_drain() does not need to be done in deactivate; we only need	Theo de Raadt
2010-09-20	Write the start of an activate function. QUIESCE should wait for the	Theo de Raadt
2010-09-20	Need an activate function to get to sub-devices. Write it by hand since	Theo de Raadt
2010-09-20	DVACT_ACTIVATE and DVACT_DEACTIVATE do nothing here; remove	Theo de Raadt
2010-09-20	Must travese deeper for DVACT_QUIESCE; ok miod	Theo de Raadt
2010-09-20	bring back scsi_base.c r1.195 and scsiconf.h r1.138 now that	David Gwynne
2010-09-20	After the gcc4 switch the stack protector triggers in atw	Jonathan Gray
2010-09-19	Overhaul ddb disassembler to recognize all MIPS IV instructions, as well as	Miod Vallat
2010-09-19	move the ncq depth calculation into atascsi_probe where it belongs. by	David Gwynne
2010-09-19	acpi sub-drivers may not use sensordev_install(); all acpi/acpiec/dsdt	Theo de Raadt
2010-09-19	add support for 82583V. Confirmed to work on Portwell CAD-0205.	YASUOKA Masahiko
2010-09-19	check the cdb length on the scsi commands we emulate in atascsi as a way to	David Gwynne
2010-09-19	Check the right mask for additional functions in phy code for 82575	Jonathan Gray
2010-09-19	wrap a long line	Theo de Raadt
2010-09-19	Move setting of reception of broadcast packets from lii_init() into	Stuart Henderson
2010-09-17	revert scsi_base.c r1.195 and scsiconf.h r1.138 as it screws up with some	David Gwynne
2010-09-17	don't forget to free program header sections when writing	Mike Belopuhov
2010-09-17	use audio(4) DVACT_{QUIESCE,RESUME}	Jacob Meuser
2010-09-17	Recognize MIPS IV extra FPU condition codes in MipsEmulateBranch().	Miod Vallat
2010-09-17	Protect a few more defines with _KERNEL checks, and also allow some of them	Miod Vallat
2010-09-17	FPU control/status register defines, and upcoming userland function	Miod Vallat
2010-09-17	Correctly disassemble `branch likely' instructions.	Miod Vallat
2010-09-17	There is only one code for coprocessor BC opcodes, so don't bother to handle	Miod Vallat
2010-09-17	Do not trust the FPU identification register obtained from KL configuration	Miod Vallat
2010-09-15	- prevent about then dots from being emitted by my rum(4) upon attach.	Jasper Lievisse Adriaanse
2010-09-14	Recognize the new sequence gcc4 uses to trap on divide by zero.	Miod Vallat
2010-09-14	Undo unrelated changes commitedby mistake.	Miod Vallat
2010-09-14	Force .rodata.str1.4 section to be merged into .text for the 32-bit bootblocks,	Miod Vallat
2010-09-14	unstatic variable we need elsewhere, fixes stand build on tezro	Marco Peereboom
2010-09-14	Fix couple of warnings	Marco Peereboom
2010-09-14	Forc -mno-abicalls when compiling non-PIC bootblocks, for gcc 4 passes -KPIC	Miod Vallat
2010-09-14	dont leak an xs in ststart if its called while the device is dying.	David Gwynne
2010-09-14	scsi_xsh_del the xs handler on DEACTIVATE.	David Gwynne
2010-09-14	Clean up sense mode handling to make residual value handling clearer	Kenneth R Westerback
2010-09-14	the openings member of scsi_link is the maximum number of commands that a	David Gwynne
2010-09-14	allow devices on fc and sas adapters to use all the openings the chip can	David Gwynne
2010-09-13	Added OCTEON in cpu type. ok miod@	Takuya ASADA
2010-09-13	First shot at ICMP error handling inside an MPLS path. Currently only	Claudio Jeker
2010-09-13	Change icmp_reflect() so that it does not call icmp_send directly. This	Claudio Jeker
2010-09-13	Using a normaly unavailable 0.0.0.1 gateway on routes on sppp(4) based	Claudio Jeker
2010-09-13	if a busy sas device is unplugged, the pending io on that device will	David Gwynne
2010-09-13	dont reuse the event notifications ccbs id for the acknowledgement.	David Gwynne
2010-09-13	im not convinced we only have one outstanding event to ack at a time. this	David Gwynne