summaryrefslogtreecommitdiff
path: root/sys
AgeCommit message (Collapse)Author
2005-05-17- add epic(4)Brad Smith
- add ep(4) to RAMDISK_CD
2005-05-17add epic(4) under the untested section.Brad Smith
ok martin@
2005-05-16add epic(4)Brad Smith
2005-05-16add a newline hereBrad Smith
2005-05-16Remove PT_[GS]ETFPREGS and struct fpreg, as we have no real floating pointMiod Vallat
registers, and the floating point control registers are savec in the reg structure.
2005-05-16remove an extra delay in rf register initReyk Floeter
2005-05-16Use cardbus_matchbyid().Brad Smith
ok millert@ jsg@
2005-05-15Fix CMMU_CSSP(n) value.Miod Vallat
Makes 88204 systems happier - yet they were working before.
2005-05-15in udf_vget(), release the buffer if a bread() failsPedro Martelletto
2005-05-15only inside DIAGNOSTICTheo de Raadt
2005-05-15typoHenning Brauer
2005-05-15Use FLUSHCACHE EXT instead of FLUSHCACHE for LBA48 operations.Alexander Yurchenko
First noticed by christos@netbsd (iirc) a long time ago. Tested by canacar@ and krw@.
2005-05-15enable ep(4)Martin Reindl
ok deraadt@
2005-05-15syncMartin Reindl
2005-05-15Schneider & Koch FDDI adapterMartin Reindl
ok deraadt@
2005-05-15ANSI, mostly from Toni Mueller <openbsd-tech@oeko.net>Henning Brauer
2005-05-15Speed up the low-level dae helpers.Miod Vallat
2005-05-15Compile out more code if TRACE_DEBUG is not defined.Miod Vallat
2005-05-15Disable ddb backtrace debug code by default.Miod Vallat
2005-05-15KNF and ANSIfy.Miod Vallat
2005-05-15Partial sync to the NetBSD wscons code, bringing a better wsmux behaviourMiod Vallat
and bugfixes (the kqueue code, /dev/wsmuxctl and screen border color changes have not been picked), keeping local changes. Tested by many on alpha/cats/hp300/i386/macppc/sparc/sparc64/zaurus if not more.
2005-05-15Oops. atapiscsi.h is needed because that's where NATAPISCSI isKenneth R Westerback
defined. Fixes Y-E DATA USB Floppy Drive that otherwise complains about 'atapiscsi not configured'. Should fix PR #4204 from Ben Hooper.
2005-05-14Try to ensure that UFI/ATAPI USB umass devices always get the zeroKenneth R Westerback
padded 12 byte commands mandated by the standard. Adapt the Linux data length twiddling on certain commands. We used to have some of this in a different form, curtesy of csapuntz@, but it got lost in subsequent merges. Fixes the USB card reader of Quentin Barnes who provided much testing and feedback for over a year! Tested by drahn@, ok marco@, 'this is good stuff' deraadt@.
2005-05-14Match a device_type of scsi-2 as SCSI (as found in a Netra 1405).Brad Smith
From NetBSD ok miod@
2005-05-14- Add IPv6 over GRE.Brad Smith
- u_short -> u_int16_t - Change default MTU to 1476 (same value that Cisco and other *BSD's use). - Mark gre(4) interfaces as IFT_TUNNEL (Encapsulation interface). From NetBSD - Support setting the MTU Be very careful when upgrading, the change in default MTU might cause problems with an existing OpenBSD <-> OpenBSD setup. Thanks to Stephen Marley <stephen dot marley at catwoman dot cl-is dot com> for some testing.
2005-05-14Remove bogus #define, no binary difference.Dale Rahn
2005-05-14Factorize most of the high-level logic for Sun serial keyboards inMiod Vallat
sys/dev/sun/sunkbd.c, and move the layout tables to sys/dev/sun/sunkbdmap.c. No functional changes, small sparc64 kernel shrinkage.
2005-05-14don't copy the capinfo field from the ap. forge our own based on whatDamien Bergamini
ieee80211_output.c does.
2005-05-14Unused after last scsi commit.Kenneth R Westerback
2005-05-14Add scsi_mode_[sense|select]_big() and use it instead ofKenneth R Westerback
atapi_mode_[sense|select](). This will allow the removal of atapi_base.c and atapi_all.h files, and sets the stage for better usb mode sense handling amoung other things. Remove cd_scsibus_[get|set]_mode() and sd_scsibus_mode_sense() shims in favour of scsi_mode_[sense|select](). Add zero'ing of reserved length field in scsi_mode_select(). Change some uchar * type parameters to scsi_mode_header *. No functional changes. Mostly from NetBSD. ok dlg@.
2005-05-14remove redundant definition of PCI_ID_CODE. I added this to theBrad Smith
MI pcivar.h header 5 months ago.
2005-05-13/dev/speaker node on cats.Miod Vallat
2005-05-13Kill <machine/spkr.h>, software should use <dev/isa/spkrio.h> instead.Miod Vallat
2005-05-13another uftdi varient, from freebsdTheo de Raadt
2005-05-13should support channel 165 too in 802.11a mode.Damien Bergamini
2005-05-13not ready for NATMTheo de Raadt
2005-05-13fix sensitivity setting.Damien Bergamini
2005-05-13fix dmesg output for pre-firmware modems.Damien Bergamini
2005-05-13Fix for a panic experienced when authenticating a pppoe session on an amd64 ↵Brad Smith
system. From: i4b project via FreeBSD via Jason Ackley Fixes PR 4190 & 4196 ok canacar@
2005-05-13override default bbp register values with values stored in eeprom (exceptDamien Bergamini
for the R17 register).
2005-05-13before ieee80211.c rev 1.6, it was guaranted that ic_curmode was differentDamien Bergamini
from IEEE80211_MODE_AUTO if ic_fixed_rate != -1. it is no longer the case. this implements a temporary workaround. the whole rate selection should be rewritten.
2005-05-13simplify test conditions. ((v & f1) || (v & f2)) <=> (v & (f1 | f2)) inDamien Bergamini
these particular cases. avoid extra calls to letoh32().
2005-05-13make sure all endpoint descriptors have been found during the attachment.Damien Bergamini
2005-05-13give disassociation a chance when turning the interface down while associated.Damien Bergamini
avoid usb tx timeouts too.
2005-05-13recognize 82551'sBrad Smith
2005-05-13Do not invoke hil_process_pendinc() from the interrupt handler if the loopMiod Vallat
is marked as busy.
2005-05-13RegenMiod Vallat
2005-05-13Separate button boxens from keyboards in the HIL device list.Miod Vallat
hilkbd will still match both, but will neither do the auto-layout dance nor attach as console for button boxens.
2005-05-13enable spkr by default; ckuethe 4201Theo de Raadt
2005-05-13do { } while (0) wrappers on debug printf macros. ok reyk@Jonathan Gray
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 17:38:00 +0000