| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2006-01-05 | if both debug and verbose defined, only spit out the dump once | Theo de Raadt | |
| 2006-01-05 | Find SLP_TYPx values and store them for future use in | Alexander Yurchenko | |
| acpi_enter_sleep_state(). | |||
| 2006-01-05 | enable nviic | David Gwynne | |
| ok deraadt | |||
| 2006-01-05 | In aml_eval_name() don't return success if no object found. | Alexander Yurchenko | |
| 2006-01-05 | Enable amdpm; ok deraadt@. | Alexander Yurchenko | |
| 2006-01-05 | Random KNF and cleanup | Alexander Yurchenko | |
| 2006-01-05 | enable dynamic standby workaround for the 82551 as well. | Brad Smith | |
| 2006-01-05 | Kill all typedef struct goo. | Marco Peereboom | |
| 2006-01-05 | Disable the minimum size frame bundling when using the CPUSaver microcode. | Brad Smith | |
| This could cause 2 interrupts per frame if the frame size is below 128 bytes. From Dmitry Bogdan <dsb at imcs dot dvgu dot ru> | |||
| 2006-01-05 | Provide symbolic names for the acpi sleeping states and use it. | Alexander Yurchenko | |
| 2006-01-05 | don't include sys/errno.h, pointed out by Miod | Martin Reindl | |
| 2006-01-05 | load the CPUSaver 102E microcode for the 82551 Rev 10 chip. | Brad Smith | |
| From the Intel e100 driver. | |||
| 2006-01-05 | More dead constants. | Miod Vallat | |
| 2006-01-05 | A match() function should never, never, ever return UNSUPP for unsupported | Miod Vallat | |
| hardware - if only because UNSUPP is 2, not 0. So you'll match, and later have to do ``oops, twas not my fault, honest'' in attach. | |||
| 2006-01-05 | Begone. | Miod Vallat | |
| 2006-01-05 | regen | Brad Smith | |
| 2006-01-05 | more fxp PCI ids. | Brad Smith | |
| From the Intel e100 driver. | |||
| 2006-01-05 | Check securelevel and machdep.allowaperture for i386_set_ioperm() the | Matthieu Herrb | |
| same way as for i386_iopl(). ok deraadt@ | |||
| 2006-01-05 | enable ixgb | Theo de Raadt | |
| 2006-01-05 | go ahead, enable asms | Theo de Raadt | |
| 2006-01-05 | Work around flawed IBM 325 eServer IPMI implementation. | Marco Peereboom | |
| Help and ok deraadt@ jordan@ | |||
| 2006-01-05 | Better debug verbosity values. | Marco Peereboom | |
| 2006-01-05 | Adjust debug levels. | Marco Peereboom | |
| 2006-01-05 | Don't change pins state on attach. | Alexander Yurchenko | |
| 2006-01-05 | I got the time scale wrong with the previous commit. Now the advertised | Marco Peereboom | |
| 50ms timeout is actually 50ms during runtime. | |||
| 2006-01-05 | Make it possible to set a default vlan priority for vlan interfaces. | Esben Norby | |
| ok claudio@ brad@ | |||
| 2006-01-05 | Finish framework for attaching kernel drivers to the GPIO pins. | Alexander Yurchenko | |
| Not used yet. | |||
| 2006-01-05 | knf | Alexander Yurchenko | |
| 2006-01-05 | Add my copyright. | Alexander Yurchenko | |
| 2006-01-05 | Add SMBus host interface support for amdpm(4). | Alexander Yurchenko | |
| ok deraadt@ | |||
| 2006-01-05 | Happy New Year! | Alexander Yurchenko | |
| 2006-01-05 | Reliability fixes: | Alexander Yurchenko | |
| - don't force enabling host controller - don't start new transfer if bus is busy - kill transfer on timeout Some ideas from kettenis@; ok deraadt@. | |||
| 2006-01-05 | interacting with the watchdog while we're in the middle of updating sensors | David Gwynne | |
| is bad(tm). if updates are happening then make esm_refresh to do esm_watchdogs work after its own. | |||
| 2006-01-05 | rev 1.59 & 1.60 of rtw.c commited by David Young to NetBSD: | Jonathan Gray | |
| On a transmit FIFO overflow (err, actually an underflow...) reset both the transmit & receive sections of the MAC. Fix comments and debug printfs: Tx FIFOs underflow, they don't overflow. | |||
| 2006-01-05 | part of rev 1.58 of rtw.c David Young comitted to NetBSD: | Jonathan Gray | |
| Miscellaneous Realtek RTL8180L driver improvements: 3 Revamp handling of transmit descriptor rings. 4 Reliably IFF_OACTIVE when transmit descriptors are available, to stop the transmit section of the driver from freezing up. 5 Fix beacon transmission in adhoc and hostap modes. XXX There is a wart in hostap mode, where beacons are transmitted at 1/2 the correct rate. Load beacon descriptors when the RTW_INTR_BINT interrupt arrives; schedule RTW_INTR_BINT 1ms ahead of the target beacon time. 6 Recover more gracefully from tx/rx errors: avoid transmitter/receiver/chip resets. Try to re-synchronize software state with hardware state---e.g., load next descriptor pointer from hardware. 7 Activate the transmit watchdog timer for beacons as well as other packets. 8 Introduce rtw_idle() that waits for transmit DMA to finish; call it before resetting the transmitter. | |||
| 2006-01-05 | ansi/deregister | Jonathan Gray | |
| 2006-01-05 | bzero buffers after malloc, or clear string buffer before strlcpy'ing | Theo de Raadt | |
| into them, if you are gonna copy it out to userland some ok dhartmei, some ok tedu | |||
| 2006-01-05 | if a kthread fails to call kthread_exit() but instead returns, | Ted Unangst | |
| bad things happen. fix acct thread. from art | |||
| 2006-01-05 | bzero after malloc; ok dhartmei | Theo de Raadt | |
| 2006-01-04 | Adjust timeout values. This was determined by using beck's ibm e325. | Marco Peereboom | |
| ok jordan | |||
| 2006-01-04 | Make bitfields readable. ok jordan@ | Marco Peereboom | |
| 2006-01-04 | Switch to the C version of random() on m68k platforms. It is almost as fast | Miod Vallat | |
| as the assembly version on 0[234]0, but *fifteen* times faster than it on 68060 systems, since it uses a form of muls.l which has to be emulated. And since we use random() for statclock variance, this means we were gratuitously doing an average of 100 emulation traps per second. ok deraadt@ millert@ | |||
| 2006-01-04 | Return from interrupt handler after chip init(reset). | Brad Smith | |
| From petrov NetBSD ok miod@ | |||
| 2006-01-04 | esm_cmd has to wait for two registers to change state for every command | David Gwynne | |
| that you issue to the controller. the current code works around busy waiting on the first register by retrying it in a new tick of softclock, but the second register was still handled with a busy wait. esm_cmd now returns which register it is up to dealing with so you can resume the command at the right point in a new tick. this drops the cpu usage when doing the updates from roughly 15% time in interrupts down to barely noticable. looks reasonable deraadt@ commitsky! marco@ | |||
| 2006-01-04 | Remove unused structures and ioctl declarations. | Miod Vallat | |
| 2006-01-04 | People doing time comparisons without using the time{r,spec}cmp macros are | Miod Vallat | |
| doomed to do them incorrectly; ok krw@ millert@ tedu@ | |||
| 2006-01-04 | Import NetBSD's direct adb code on mac68k, switching to real keyboard and mouse | Miod Vallat | |
| drivers, and to wscons as the console; a few parts borrowed from OpenBSD/macppc as well. Currently only working with displays configured in 1bpp or 8bpp modes; this limitation will be worked on ASAP. Tested by claudio@ kettenis@ martin@ nick@ and I on various models. X11 changes coming soon. | |||
| 2006-01-04 | More accurate sc_minsync computation on 16.5MHz ESPs; ok martin@ | Miod Vallat | |
| 2006-01-04 | Crank MAXPHYS to 64KB again and remove bogus comment. | Miod Vallat | |
| 2006-01-04 | Initialize virtual_end to a decent value, so that VM_MAX_KERNEL_ADDRESS is | Miod Vallat | |
| meaningful before pmap_bootstrap() is invoked; gets us valid buffer numbers computation. | |||
 |
index : src | |
| OpenBSD base system |
| summaryrefslogtreecommitdiff |