summaryrefslogtreecommitdiff
path: root/sys
AgeCommit message (Expand)Author
2008-06-02Add a bunch of ELV Elektronik ftdi based devices found in theJonathan Gray
2008-06-02Move interrupt setup to before ddb setup not after.Jonathan Gray
2008-06-02Fix synproxy breakage introduced with the state table reorganization.Ryan Thomas McBride
2008-06-02fix DEBUG flag. without EHCI_DEBUG, ehcidebug is not defined.Yojiro Uo
2008-06-02fix kernel freeze when the device unpluged (and the device was still active)Yojiro Uo
2008-06-02regenBrad Smith
2008-06-02- Sort the QLogic entries by PCI id.Brad Smith
2008-06-01Unlink handled interrupts from the list of pending interrupts atomically.Mark Kettenis
2008-06-01regenMark Kettenis
2008-06-01Add Emulex LP9000.Mark Kettenis
2008-06-01Fix \n nit in SMALL_KERNEL.Marco Peereboom
2008-06-01Re-enable new parser. Lots of testing by various folks. Fits all mediaMarco Peereboom
2008-06-01Make SCSI isp(4) use the same SCSI initiator ID as the prom on sparc/sparc64.Mark Kettenis
2008-06-01Remove iobviously untrue comment.Mark Kettenis
2008-06-01ACX111 parts can't send using short slot time, but it seems to have no problemBrad Smith
2008-06-01Use 1Mbits/s as beacon sending rate; it seems to fix TX performance issueBrad Smith
2008-05-31if a dma mapping contains oddly addressed or odd length segments, then weDavid Gwynne
2008-05-31Apparently the interrupt status register doesn't always replicate the TXMark Kettenis
2008-05-31Turn the rx descriptor ring into a real ring instead of letting things fallMark Kettenis
2008-05-31regenMark Kettenis
2008-05-31Add PLX 6520 PCIX-PCIX bridge.Mark Kettenis
2008-05-31regenMark Kettenis
2008-05-31Add Emulex LP10000.Mark Kettenis
2008-05-31Properly set the IFF_OACTIVE flag if all the descriptrs are in use forBrad Smith
2008-05-31Properly set the IFF_OACTIVE flag if all the descriptrs are in use forBrad Smith
2008-05-31Clear the IFF_RUNNING/IFF_OACTIVE flags and the watchdog timer inBrad Smith
2008-05-30Remove the untracked mapping before calling uvm_km_free(), otherwise theFederico G. Schwindt
2008-05-30skip ext2fs on thisTheo de Raadt
2008-05-30trivial KNF before we go furtherHenning Brauer
2008-05-30syncThordur I. Bjornsson
2008-05-30add the intel turbo memory device idThordur I. Bjornsson
2008-05-30Allocate static buffer for software frame buffer and make sure to notMarcus Glocker
2008-05-30some KNF.Brad Smith
2008-05-30Remove unused NetBSD code for dmesg printing.Brad Smith
2008-05-29dlg backed out one too many revisions, bring back 1.2joshua stein
2008-05-29regenRobert Nagy
2008-05-29add a third MSI bluetooth deviceRobert Nagy
2008-05-29specify alternate default audio parameters to make the default expansionJacob Meuser
2008-05-29Recognize the Cicada CS8204 quad port PHY.Brad Smith
2008-05-29- Add a debug message to mention when a 2.5Gb adapter is found.Brad Smith
2008-05-29use ac97 default parameters for these ac97 based drivers.Jacob Meuser
2008-05-29Second half of PF state table rearrangement.Ryan Thomas McBride
2008-05-29rewrite the state table logic.Henning Brauer
2008-05-28Enable hme(4). Reported to work by Stian Sletner.Mark Kettenis
2008-05-28Add a boot.8 manual page (copied straight from armish). This will in turnMiod Vallat
2008-05-28Add a boot.8 manual page (adapted from other platforms which use the MIMiod Vallat
2008-05-28Don't document ``device foo'' yet either.Miod Vallat
2008-05-28Add a boot.8 manual page (adapted from other platforms which use the MIMiod Vallat
2008-05-28Turns out I have an ISP 12160 myself, and it works fine on sparc64. SinceMark Kettenis
2008-05-28Don't try reading the SXP_PINS_DIFF on the 10160 and 12160 SCSI controllers.Mark Kettenis