Age | Commit message (Collapse) | Author | |
---|---|---|---|
2006-08-24 | Fix a few more cases where we propogate low level errors to userland. | Gordon Willem Klok | |
found by niallo. | |||
2006-08-24 | Check for a selftest failure after reset in the correct register. | Miod Vallat | |
2006-08-24 | Enable the appropriate serial transmitters in VXT2000 serial routines, this | Miod Vallat | |
makes output work when the VXT2000 is not configured for serial console. | |||
2006-08-24 | s/IEEE80211_MTU_MAX/IEEE80211_MAX_LEN/ in my previous commit. | Damien Bergamini | |
2006-08-24 | dont print debug output when the scsi completion path returns with | David Gwynne | |
something other than SCSI_OK. for example, SCSI_SENSE is returned when the device has sense data. this code was left in to help debug problems in the field, but noones had any problems with mpi apart from it being too chatty when a device returns sense data... | |||
2006-08-24 | show the firmware revision of the disks. | David Gwynne | |
2006-08-24 | report the size of the disks and volumes correctly. | David Gwynne | |
2006-08-24 | Be sure to print device name in debug messages, remove | Jonathan Gray | |
a few surplus dmesg messages while here. | |||
2006-08-24 | Add support for HMACs to the via c3/c7 crypto driver. For now, we | Hans-Joerg Hoexer | |
just use the software implemented algorithms. This is needed to make this driver useable for ipsec. ok deraadt@ | |||
2006-08-24 | when shutting down, wrap the variable manipulation in splusb() so weird | Jason Wright | |
stuff doesn't happen if we're interrupted. | |||
2006-08-24 | too much copy and paste. report raid 1 correctly. | David Gwynne | |
2006-08-24 | ignore passthru volumes, struct bioc_vol isnt smart enough to know what | David Gwynne | |
they are. | |||
2006-08-24 | figure out the raid level of the volume. | David Gwynne | |
2006-08-24 | oops, im unlocking too often | David Gwynne | |
2006-08-24 | a start at the BIOC INQ, VOL, and DISK ioctls for fetching information | David Gwynne | |
about the disks that are configured on the controller. so far this fetches the right volumes and disks in each volume, but doesnt properly fill in the status, the size of both the volumes and disks, the type of raid, or the firmware version of the physical disks. | |||
2006-08-24 | regen | Gordon Willem Klok | |
2006-08-24 | Add vendor "miro computer products AG" and device MiroVIEDO DC20 plus | Gordon Willem Klok | |
three others found at pcidatabase.com. | |||
2006-08-24 | regen | Brad Smith | |
2006-08-24 | add the Epson Perfection 1670 and Stylus CX3650. | Brad Smith | |
From FreeBSD | |||
2006-08-24 | Move d_secpercyl test to after setting default size. Missed in earlier | Kenneth R Westerback | |
adjustment of other disksubr.c's. | |||
2006-08-23 | - fall back to 1Mbps if tx rate is returned as zero. avoids divide by zero. ↵ | Niall O'Higgins | |
should never happen, but sometimes it does on my amd64. ok damien@ | |||
2006-08-23 | Protect scsi_done() with splbio(), discussed with and okay dlg@, marco@ | Pedro Martelletto | |
and fgsch@, uwe@ time-out :( | |||
2006-08-23 | the maximum MTU allowed for IEEE802.11 is 2290 which is greater than | Damien Bergamini | |
MCLBYTES (usually 2048). allocate tx xfer buffers of IEEE80211_MTU_MAX instead of MCLBYTES. rx buffers are still limited to MCLBYTES though. | |||
2006-08-23 | in rum_rxeof(), don't check xfer length against IEEE80211_MIN_LEN since | Damien Bergamini | |
the CRC is not included in the xfer. check against sizeof(struct ieee80211_frame_min) instead. | |||
2006-08-23 | regen | Brad Smith | |
2006-08-23 | add SiS 191 Gig Ethernet PCI id. | Brad Smith | |
2006-08-23 | Add Nova Tech NV-902W, and mention another Zinwell ural(4) device. | Jonathan Gray | |
2006-08-23 | regen | Jonathan Gray | |
2006-08-23 | Add another ural(4) device, Nova Tech NV-902W. | Jonathan Gray | |
2006-08-22 | Fix possible NULL deref from Alexey V. Vatchenko <avv@mail.zp.ua> | Marco Peereboom | |
2006-08-22 | More register defines. | Miod Vallat | |
2006-08-22 | Wrap dmesg | Miod Vallat | |
2006-08-22 | Clear sti display on console attach, now that the bootloader leaves us | Miod Vallat | |
with scribbles around; ok mickey@ | |||
2006-08-22 | Implement pmap_steal_memory() if HAVE_PMAP_DIRECT; no change except for | Miod Vallat | |
faster uvm initialization. | |||
2006-08-22 | provide some smp locking around protection fault trap from user too; ↵ | Michael Shalayeff | |
originally from niklas; been in snaps; tested on various smp boxen; niklas@ok | |||
2006-08-22 | Same change as on i386: use a case-insensitive comparison when checking | Tom Cosgrove | |
for bogus SMBIOS strings. Fixes identification of millert@'s system. | |||
2006-08-22 | remove the check for the number of heads reported by the BPB altogether, | Nikolay Sturm | |
there are devices reporting zero heads; we don't use this value anyways ok pedro, reported by Igor Grabin <violent at death.kiev.ua> | |||
2006-08-22 | Use a case-insensitive comparison when checking for bogus SMBIOS | Tom Cosgrove | |
strings. Fixes identification of millert@'s system. ok gwk@ | |||
2006-08-22 | use LIST_FOREACH; from FreeBSD | Martin Reindl | |
2006-08-22 | Very initial import to support the PrismGT chipset (FullMAC for now). | Marcus Glocker | |
ok deraadt@ | |||
2006-08-22 | - Re-add the m_adj() back into em_get_buf(), but this time check | Brad Smith | |
the HW max frame size and only call m_adj() if the size is less than or equal to MCLBYTES - ETHER_ALIGN (2046). - Set the HW long packet enable bit on all adapters, even 82573 based adapters which are capable of Jumbo's. - Only do RX alignment fixup on adapters capable of Jumbo frames. ok jason@ | |||
2006-08-22 | acx(4) seems to work fine on amd64 here also, so enable it. | Jonathan Gray | |
2006-08-22 | Deactivate the QTDs when removing a queue head to prevent the host | Christopher Pascoe | |
controller from reactivating it. Slight variation on what is suggested in the EHCI spec to work around problems with VIA controllers. ok dlg@ | |||
2006-08-22 | Be more aggressive about waiting for the host controller doorbell, | Christopher Pascoe | |
re-requesting it at half second intervals for up to five seconds. ok dlg@ | |||
2006-08-21 | Answer ARP queries also for addresses on carp interfaces, if carps | Marco Pfatschbacher | |
physical interface shares a bridge with the interface that received it. Patch based on a version from camield@ Fixes PR 5178. OK mcbride@ | |||
2006-08-21 | ramdisks do not have vlan, drop mbuf; ok brad | Theo de Raadt | |
2006-08-21 | Delete #ifdef/#ifndef __OpenBSD__ chunks, leaving just the code we | Kenneth R Westerback | |
use. Easier to read and eliminates a potentially confusing unused call to wdgetdisklabel(). No change to object files. ok brad@ dlg@ grange@ deraadt@ marco@ | |||
2006-08-21 | Add missing amrr statistic updates. Makes rate control work proper. | Marcus Glocker | |
Pointed out by damien@. ok damien@ | |||
2006-08-21 | simplfy code a bit and fix comments, this is the MRU being set not the | Brad Smith | |
MTU. | |||
2006-08-21 | enable Jumbo support. | Brad Smith | |