Age | Commit message (Expand) | Author |
2008-04-07 | Compare device names consistantly in parsedisk(). | Kenneth R Westerback |
2008-04-07 | SGI 1-Wire Number-In-a-Can drivers. These are regular Dallas/Maxim append-only | Miod Vallat |
2008-04-07 | Simple com@ioc (with interrupt handling disabled until ioc interrupt code is | Miod Vallat |
2008-04-07 | Preliminary IOC3 multi-function chip driver, from jsing@ and I. Currently | Miod Vallat |
2008-04-07 | Allow a 1-Wire controller to request an immediate scan, and also to prevent | Miod Vallat |
2008-04-07 | Regen | Miod Vallat |
2008-04-07 | A first cut at XBow bus support, very minimal, limited to a local bus only; | Miod Vallat |
2008-04-07 | Platform-specific bits for IP30 (Octane). Based on knowledge extracted from | Miod Vallat |
2008-04-07 | Allow for up to 32 memory segments. | Miod Vallat |
2008-04-07 | Add a freelist member to the ARCBios memory information. For now, all ARCBios | Miod Vallat |
2008-04-07 | Add ``guarded'' word read and write routines, to be used by machine-dependent | Miod Vallat |
2008-04-07 | Split clock attachment in two parts: a timecounter attachment (at mainbus), | Miod Vallat |
2008-04-07 | Since uncached virtual addresses will depend upon space identifiers on R1xk | Miod Vallat |
2008-04-07 | Unclutter machdep.c by moving the IP32-specific initialization code to its | Miod Vallat |
2008-04-07 | Use CCA_CACHED as the default CCA for all cached mappings and addresses. | Miod Vallat |
2008-04-07 | Define the pte cacheability bits from the cpu.h cache coherency constants. | Miod Vallat |
2008-04-07 | Define more cache coherency attributes, as well as R10k space identifiers. | Miod Vallat |
2008-04-07 | Hardware monitor address should be 8-byte aligned. | Mark Kettenis |
2008-04-07 | snprintf "%s" -> strlcpy | Oleg Safiullin |
2008-04-07 | fix snprintf usage | Oleg Safiullin |
2008-04-07 | In _dmamem_map(), be sure to convert the address from the device view to | Miod Vallat |
2008-04-07 | Don't grab the kernel biglock for syscalls marked SY_NOLOCK; | Thordur I. Bjornsson |
2008-04-07 | regen | David Gwynne |
2008-04-07 | neptune | David Gwynne |
2008-04-07 | more cosmetic changes | Oleg Safiullin |
2008-04-07 | some cosmetic changes | Oleg Safiullin |
2008-04-07 | sync | Oleg Safiullin |
2008-04-07 | add D-Link KVM-221 | Oleg Safiullin |
2008-04-07 | sdtemp* devices could occur on these machines | Theo de Raadt |
2008-04-07 | New sensor driver for JDEC JC-42.4 standard dimm temperature sensors | Theo de Raadt |
2008-04-07 | Identify two chips which follow the JDEC JC-42.4 standard dimm temperature | Theo de Raadt |
2008-04-06 | SH is not ARM. | Dale Rahn |
2008-04-06 | In sendit(), len should be size_t, not int. Could cause it to return | Stefan Kempf |
2008-04-06 | regen | Brad Smith |
2008-04-06 | - Add the Intel ICH8/9 Thermal sensors. | Brad Smith |
2008-04-05 | fix comment for it(4) | Oleg Safiullin |
2008-04-04 | ratecheck(9) only seems to be used to limit things to very coarse intervals | David Gwynne |
2008-04-04 | tht is cool cos it generates interrupts when the link state change. | David Gwynne |
2008-04-04 | if full-duplex is being turned on, also set the oprtational mode to | Jacob Meuser |
2008-04-03 | Use atomic operations to invalidate TSB entries. | Mark Kettenis |
2008-04-03 | Clean up the DMA read/write control register setup code and add some | Brad Smith |
2008-04-03 | Add missing half duplex flags for the media status. | Brad Smith |
2008-04-03 | Switch it(4) back to PnP config mode. Avoid possible | Oleg Safiullin |
2008-04-03 | Make ebus(4) work on sun4v. | Mark Kettenis |
2008-04-03 | Some cosmetic changes. | Mark Kettenis |
2008-04-03 | Ensure that we wrap around to the start of the TXD buffer when incrementing | Joel Sing |
2008-04-02 | Add nsgphy(4). | Mark Kettenis |
2008-04-02 | Add support for the National Semiconductor Saturn (which really is a Sun | Mark Kettenis |
2008-04-02 | Add support for the DP83865. | Mark Kettenis |
2008-04-02 | regen | Mark Kettenis |