| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2010-02-07 | use new mcu command to select the antenna on RT2020 | Damien Bergamini | |
| requires the new firmware | |||
| 2010-02-07 | split 32-bit mac_rev into 16-bit mac_ver and mac_rev to avoid | Damien Bergamini | |
| annoying shifts and masks. | |||
| 2010-02-07 | add rf init values for rt3572 | Damien Bergamini | |
| add settings for 5GHz channels (rt3572 only) | |||
| 2010-02-07 | update firmware for rt2870 and >=rt3071 | Damien Bergamini | |
| required for future changes | |||
| 2010-02-07 | add channels 167, 169, 171, 173 for dual-band devices | Damien Bergamini | |
| 2010-02-06 | when receiving the first message of an rsn group key handshake | joshua stein | |
| packet, copy the key out of it properly. fixes the problem where only broadcast packets like ipv6 router advertisements were failing decryption and processing, only after a rekey. ok damien@ | |||
| 2010-02-05 | Now that the BTB errata are out of the way, enable the CS5536 timecounter again, | Miod Vallat | |
| albeit at a lower quality level than on x86, so that the cpu counter-timer gets preferred by default. | |||
| 2010-02-05 | add uaudio; ok miod@ | Otto Moerbeek | |
| 2010-02-05 | Blind support for SM501 model. This should give the Gdium Liberty a working, | Miod Vallat | |
| accelerated console. No regression on Lemote Yeelong. | |||
| 2010-02-05 | regen | Miod Vallat | |
| 2010-02-05 | Add SiliconMotion Voyager GX, reportedly found in Gdium Liberty. | Miod Vallat | |
| 2010-02-05 | Add a set of functions to access PCI configuration space before bonito(4) | Miod Vallat | |
| attaches, and use it to walk the PCI bus to figure out where the onboard frame buffer device lies, if any; and get the frame buffer memory address from reading the proper PCI BAR instead of hardcoding it; this should allow the Gdium Liberty to configure its console correctly. | |||
| 2010-02-05 | Blind support for the EMTEC Gdium Liberty netbook. Per-platform configuration | Miod Vallat | |
| is moved to specific files, and a pointer to the key configuration structure is now kept in struct sys_config. bonito(4) interrupt handling is split, to allow PCI+Legacy interrupt systems (Lemote Yeelong) and PCI-only Legacy-free systems (Gdium) to coexist peacefully. | |||
| 2010-02-05 | Compute and pass resource extents to the MI pci code when attaching pci@bonito. | Miod Vallat | |
| 2010-02-05 | When setting up memory regions on Loongson 2F-based machines, make sure we | Miod Vallat | |
| reprogram the existing windows to our needs, in case the PCI->DDR window does not span the whole memory size. While there, introduce a function to reprogram a window for code clarity. | |||
| 2010-02-05 | When faking the glxpcib(4) BARs, do not mask the low 12 bits, but only as | Miod Vallat | |
| many bits as necessary to match the alignment requirements. This prevents all the I/O BARs to end up using the same address. | |||
| 2010-02-05 | regen | Jasper Lievisse Adriaanse | |
| 2010-02-05 | - fix doubles | Jasper Lievisse Adriaanse | |
| 2010-02-05 | Use correct format specifiers for 'show bcstats'. | Joel Sing | |
| ok beck@ krw@ | |||
| 2010-02-05 | regen | Jasper Lievisse Adriaanse | |
| 2010-02-05 | - add few new devices found in dmesglog | Jasper Lievisse Adriaanse | |
| 2010-02-04 | basic bootpath -> bootdev translation; ok miod@ | Otto Moerbeek | |
| 2010-02-04 | add a few USB devices known to work; ok miod@ | Otto Moerbeek | |
| 2010-02-04 | pf_get_sport() picks a random port from the port range specified in a | Stuart Henderson | |
| nat rule. It should check to see if it's in-use (i.e. matches an existing PF state), if it is, it cycles sequentially through other ports until it finds a free one. However the check was being done with the state keys the wrong way round so it was never actually finding the state to be in-use. - switch the keys to correct this, avoiding random state collisions with nat. Fixes PR 6300 and problems reported by robert@ and viq. - check pf_get_sport() return code in pf_test(); if port allocation fails the packet should be dropped rather than sent out untranslated. Help/ok claudio@. | |||
| 2010-02-04 | Added optimization for XY reads, requires only one temp buffer | Jordan Hargrave | |
| 2010-02-04 | Optimized failure handing for Read with X/P failures | Jordan Hargrave | |
| Does not require additional temporary buffer | |||
| 2010-02-03 | Remove memory limitation to the low 256MB. With the -mfix-loongson2f-btb | Miod Vallat | |
| workaround in place, the kernel can make use of the whole memory without freezing. | |||
| 2010-02-03 | There is no need to compile this code with .set noat, really. | Miod Vallat | |
| 2010-02-03 | Build the kernel with -mfix-loongson2f-btb. Requires up-to-date binutils. | Miod Vallat | |
| 2010-02-03 | Provide a value for MACHINE_CPU, to let the build machinery reuse the existing | Miod Vallat | |
| mips64 (big endian) code. Endian-specific differences are handled within mips64 code with proper cpp tests. | |||
| 2010-02-03 | init ofdm sensitivity with min value (which depends on the chip) | Damien Bergamini | |
| instead of hardcoding it to 90. | |||
| 2010-02-03 | Enable the next page bit for IP1001, otherwise the PHY fails | Stuart Henderson | |
| to re-establish 1000baseT link after downgrading to 10/100. Fixes problems for Andreas Bartelt with ipgphy at VT6130. From FreeBSD via Brad, ok naddy@ | |||
| 2010-02-03 | Use nitems. | Joel Sing | |
| 2010-02-03 | typo. CPU_ID_ARM1022EJS -> CPU_ID_ARM1026EJS | Kevin Lo | |
| ok drahn@ | |||
| 2010-02-02 | Attach athn(4) to the AR2427 which is a castrated (no 11n) AR928X. | Damien Bergamini | |
| The Asus Eee PC 1005P has such a device. This makes things even more confusing since athn now also supports some non-802.11n devices! Please let me know if you have such a device. | |||
| 2010-02-02 | regen | Damien Bergamini | |
| 2010-02-02 | add AR2427 pci id | Damien Bergamini | |
| 2010-02-02 | Fix for the Intel WiFi Link 1000. | Damien Bergamini | |
| The EEPROM image is in the OTPROM block before the last block, not in the last block itself. Intel WiFi Link 1000 parts should work now. | |||
| 2010-02-02 | Add rcs id's | Kevin Lo | |
| ok drahn@ | |||
| 2010-02-02 | Skip calling smp_rendezvous if it's not necessary. | Takuya ASADA | |
| ok miod@ | |||
| 2010-02-02 | lazy FP saving on uniprocessor, just like macppc. | Takuya ASADA | |
| ok miod@ | |||
| 2010-02-01 | Commit a diff I had sitting around in my tree that 90% matches one sent by | Dale Rahn | |
| dermist. fixes moko build. | |||
| 2010-02-01 | - add and enable puc(4) (only com, i didn't test lpt) | Jasper Lievisse Adriaanse | |
| ok miod@ | |||
| 2010-02-01 | regen | Damien Bergamini | |
| 2010-02-01 | change descriptions for WiFi Link 6000 series | Damien Bergamini | |
| 2010-02-01 | unmute GPIO 0 on IDT 92HD73C1 codecs found in Dell machines | Jacob Meuser | |
| 2010-02-01 | Limit memory to 256MB at the moment, (intrusive) part of the branch | Miod Vallat | |
| prediction workarounds until something better is devised. | |||
| 2010-02-01 | On Loongson 2 processors, clear the branch target buffer on userland->kernel | Miod Vallat | |
| transitions, to work around an evil horde of evil bugs in the processor's branch prediction logic. This finally makes the Lemote Yeeloong stable, and I can now spend my time looking for hair implants resellers. | |||
| 2010-02-01 | Fix thinko in previous. | Miod Vallat | |
| 2010-01-31 | update to get a working bsd.rd | Otto Moerbeek | |
 |
index : src | |
| OpenBSD base system |
| summaryrefslogtreecommitdiff |